kenmirrors
/
freeswitch
mirror of https://github.com/signalwire/freeswitch.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity
freeswitch/libs/spandsp/src/v17rx.c

1463 lines
56 KiB
C
Raw Blame History

#define IAXMODEM_STUFF
/*
* SpanDSP - a series of DSP components for telephony
*
* v17rx.c - ITU V.17 modem receive part
*
* Written by Steve Underwood <steveu@coppice.org>
*
* Copyright (C) 2004, 2005, 2006, 2007 Steve Underwood
*
* All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU Lesser General Public License version 2.1,
* as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
* $Id: v17rx.c,v 1.153.4.6 2009/12/28 12:20:46 steveu Exp $
*/
/*! \file */
#if defined(HAVE_CONFIG_H)
#include "config.h"
#endif
#include <stdlib.h>
#include <inttypes.h>
#include <string.h>
#include <stdio.h>
#if defined(HAVE_TGMATH_H)
#include <tgmath.h>
#endif
#if defined(HAVE_MATH_H)
#include <math.h>
#endif
#include "floating_fudge.h"
#include "spandsp/telephony.h"
#include "spandsp/logging.h"
#include "spandsp/complex.h"
#include "spandsp/vector_float.h"
#include "spandsp/complex_vector_float.h"
#include "spandsp/vector_int.h"
#include "spandsp/complex_vector_int.h"
#include "spandsp/async.h"
#include "spandsp/power_meter.h"
#include "spandsp/arctan2.h"
#include "spandsp/dds.h"
#include "spandsp/complex_filters.h"
#include "spandsp/v29rx.h"
#include "spandsp/v17tx.h"
#include "spandsp/v17rx.h"
#include "spandsp/private/logging.h"
#include "spandsp/private/v17rx.h"
#include "v17_v32bis_tx_constellation_maps.h"
#include "v17_v32bis_rx_constellation_maps.h"
#if defined(SPANDSP_USE_FIXED_POINT)
#include "v17_v32bis_rx_fixed_rrc.h"
#else
#include "v17_v32bis_rx_floating_rrc.h"
#endif
/*! The nominal frequency of the carrier, in Hertz */
#define CARRIER_NOMINAL_FREQ 1800.0f
/*! The nominal baud or symbol rate */
#define BAUD_RATE 2400
/*! The adaption rate coefficient for the equalizer during initial training */
#define EQUALIZER_DELTA 0.21f
/*! The adaption rate coefficient for the equalizer during continuous fine tuning */
#define EQUALIZER_SLOW_ADAPT_RATIO 0.1f
/* Segments of the training sequence */
/*! The length of training segment 1, in symbols */
#define V17_TRAINING_SEG_1_LEN 256
/*! The length of training segment 2 in long training mode, in symbols */
#define V17_TRAINING_SEG_2_LEN 2976
/*! The length of training segment 2 in short training mode, in symbols */
#define V17_TRAINING_SHORT_SEG_2_LEN 38
/*! The length of training segment 3, in symbols */
#define V17_TRAINING_SEG_3_LEN 64
/*! The length of training segment 4A, in symbols */
#define V17_TRAINING_SEG_4A_LEN 15
/*! The length of training segment 4, in symbols */
#define V17_TRAINING_SEG_4_LEN 48
/*! The 16 bit pattern used in the bridge section of the training sequence */
#define V17_BRIDGE_WORD 0x8880
/*! The length of the equalizer buffer */
#define V17_EQUALIZER_LEN (V17_EQUALIZER_PRE_LEN + 1 + V17_EQUALIZER_POST_LEN)
enum
{
TRAINING_STAGE_NORMAL_OPERATION = 0,
TRAINING_STAGE_SYMBOL_ACQUISITION,
TRAINING_STAGE_LOG_PHASE,
TRAINING_STAGE_SHORT_WAIT_FOR_CDBA,
TRAINING_STAGE_WAIT_FOR_CDBA,
TRAINING_STAGE_COARSE_TRAIN_ON_CDBA,
TRAINING_STAGE_FINE_TRAIN_ON_CDBA,
TRAINING_STAGE_SHORT_TRAIN_ON_CDBA_AND_TEST,
TRAINING_STAGE_TRAIN_ON_CDBA_AND_TEST,
TRAINING_STAGE_BRIDGE,
TRAINING_STAGE_TCM_WINDUP,
TRAINING_STAGE_TEST_ONES,
TRAINING_STAGE_PARKED
};
/* Coefficients for the band edge symbol timing synchroniser (alpha = 0.99) */
/* low_edge = 2.0f*M_PI*(CARRIER_NOMINAL_FREQ - BAUD_RATE/2.0f)/SAMPLE_RATE; */
/* high_edge = 2.0f*M_PI*(CARRIER_NOMINAL_FREQ + BAUD_RATE/2.0f)/SAMPLE_RATE; */
#define SIN_LOW_BAND_EDGE 0.453990499f
#define COS_LOW_BAND_EDGE 0.891006542f
#define SIN_HIGH_BAND_EDGE 0.707106781f
#define COS_HIGH_BAND_EDGE -0.707106781f
#define ALPHA 0.99f
#if defined(SPANDSP_USE_FIXED_POINTx)
#define SYNC_LOW_BAND_EDGE_COEFF_0 ((int)(FP_FACTOR*(2.0f*ALPHA*COS_LOW_BAND_EDGE)))
#define SYNC_LOW_BAND_EDGE_COEFF_1 ((int)(FP_FACTOR*(-ALPHA*ALPHA)))
#define SYNC_LOW_BAND_EDGE_COEFF_2 ((int)(FP_FACTOR*(-ALPHA*SIN_LOW_BAND_EDGE)))
#define SYNC_HIGH_BAND_EDGE_COEFF_0 ((int)(FP_FACTOR*(2.0f*ALPHA*COS_HIGH_BAND_EDGE)))
#define SYNC_HIGH_BAND_EDGE_COEFF_1 ((int)(FP_FACTOR*(-ALPHA*ALPHA)))
#define SYNC_HIGH_BAND_EDGE_COEFF_2 ((int)(FP_FACTOR*(-ALPHA*SIN_HIGH_BAND_EDGE)))
#define SYNC_MIXED_EDGES_COEFF_3 ((int)(FP_FACTOR*(-ALPHA*ALPHA*(SIN_HIGH_BAND_EDGE*COS_LOW_BAND_EDGE - SIN_LOW_BAND_EDGE*COS_HIGH_BAND_EDGE))))
#else
#define SYNC_LOW_BAND_EDGE_COEFF_0 (2.0f*ALPHA*COS_LOW_BAND_EDGE)
#define SYNC_LOW_BAND_EDGE_COEFF_1 (-ALPHA*ALPHA)
#define SYNC_LOW_BAND_EDGE_COEFF_2 (-ALPHA*SIN_LOW_BAND_EDGE)
#define SYNC_HIGH_BAND_EDGE_COEFF_0 (2.0f*ALPHA*COS_HIGH_BAND_EDGE)
#define SYNC_HIGH_BAND_EDGE_COEFF_1 (-ALPHA*ALPHA)
#define SYNC_HIGH_BAND_EDGE_COEFF_2 (-ALPHA*SIN_HIGH_BAND_EDGE)
#define SYNC_MIXED_EDGES_COEFF_3 (-ALPHA*ALPHA*(SIN_HIGH_BAND_EDGE*COS_LOW_BAND_EDGE - SIN_LOW_BAND_EDGE*COS_HIGH_BAND_EDGE))
#endif
#if defined(SPANDSP_USE_FIXED_POINTx)
static const int constellation_spacing[4] =
{
((int)(FP_FACTOR*1.414f),
((int)(FP_FACTOR*2.0f)},
((int)(FP_FACTOR*2.828f)},
((int)(FP_FACTOR*4.0f)},
};
#else
static const float constellation_spacing[4] =
{
1.414f,
2.0f,
2.828f,
4.0f
};
#endif
SPAN_DECLARE(float) v17_rx_carrier_frequency(v17_rx_state_t *s)
{
return dds_frequencyf(s->carrier_phase_rate);
}
/*- End of function --------------------------------------------------------*/
SPAN_DECLARE(float) v17_rx_symbol_timing_correction(v17_rx_state_t *s)
{
return (float) s->total_baud_timing_correction/((float) RX_PULSESHAPER_COEFF_SETS*10.0f/3.0f);
}
/*- End of function --------------------------------------------------------*/
SPAN_DECLARE(float) v17_rx_signal_power(v17_rx_state_t *s)
{
return power_meter_current_dbm0(&s->power) + 3.98f;
}
/*- End of function --------------------------------------------------------*/
SPAN_DECLARE(void) v17_rx_signal_cutoff(v17_rx_state_t *s, float cutoff)
{
/* The 0.4 factor allows for the gain of the DC blocker */
s->carrier_on_power = (int32_t) (power_meter_level_dbm0(cutoff + 2.5f)*0.4f);
s->carrier_off_power = (int32_t) (power_meter_level_dbm0(cutoff - 2.5f)*0.4f);
}
/*- End of function --------------------------------------------------------*/
static void report_status_change(v17_rx_state_t *s, int status)
{
if (s->status_handler)
s->status_handler(s->status_user_data, status);
else if (s->put_bit)
s->put_bit(s->put_bit_user_data, status);
}
/*- End of function --------------------------------------------------------*/
#if defined(SPANDSP_USE_FIXED_POINTx)
SPAN_DECLARE(int) v17_rx_equalizer_state(v17_rx_state_t *s, complexi16_t **coeffs)
#else
SPAN_DECLARE(int) v17_rx_equalizer_state(v17_rx_state_t *s, complexf_t **coeffs)
#endif
{
*coeffs = s->eq_coeff;
return V17_EQUALIZER_LEN;
}
/*- End of function --------------------------------------------------------*/
static void equalizer_save(v17_rx_state_t *s)
{
#if defined(SPANDSP_USE_FIXED_POINTx)
cvec_copyi16(s->eq_coeff_save, s->eq_coeff, V17_EQUALIZER_LEN);
#else
cvec_copyf(s->eq_coeff_save, s->eq_coeff, V17_EQUALIZER_LEN);
#endif
}
/*- End of function --------------------------------------------------------*/
static void equalizer_restore(v17_rx_state_t *s)
{
#if defined(SPANDSP_USE_FIXED_POINTx)
cvec_copyi16(s->eq_coeff, s->eq_coeff_save, V17_EQUALIZER_LEN);
cvec_zeroi16(s->eq_buf, V17_EQUALIZER_LEN);
s->eq_delta = 32768.0f*EQUALIZER_SLOW_ADAPT_RATIO*EQUALIZER_DELTA/V17_EQUALIZER_LEN;
#else
cvec_copyf(s->eq_coeff, s->eq_coeff_save, V17_EQUALIZER_LEN);
cvec_zerof(s->eq_buf, V17_EQUALIZER_LEN);
s->eq_delta = EQUALIZER_SLOW_ADAPT_RATIO*EQUALIZER_DELTA/V17_EQUALIZER_LEN;
#endif
s->eq_put_step = RX_PULSESHAPER_COEFF_SETS*10/(3*2) - 1;
s->eq_step = 0;
}
/*- End of function --------------------------------------------------------*/
static void equalizer_reset(v17_rx_state_t *s)
{
/* Start with an equalizer based on everything being perfect */
#if defined(SPANDSP_USE_FIXED_POINTx)
cvec_zeroi16(s->eq_coeff, V17_EQUALIZER_LEN);
s->eq_coeff[V17_EQUALIZER_PRE_LEN] = complex_seti16(3*FP_FACTOR, 0);
cvec_zeroi16(s->eq_buf, V17_EQUALIZER_LEN);
s->eq_delta = 32768.0f*EQUALIZER_DELTA/V17_EQUALIZER_LEN;
#else
cvec_zerof(s->eq_coeff, V17_EQUALIZER_LEN);
s->eq_coeff[V17_EQUALIZER_PRE_LEN] = complex_setf(3.0f, 0.0f);
cvec_zerof(s->eq_buf, V17_EQUALIZER_LEN);
s->eq_delta = EQUALIZER_DELTA/V17_EQUALIZER_LEN;
#endif
s->eq_put_step = RX_PULSESHAPER_COEFF_SETS*10/(3*2) - 1;
s->eq_step = 0;
}
/*- End of function --------------------------------------------------------*/
#if defined(SPANDSP_USE_FIXED_POINTx)
static __inline__ complexi16_t equalizer_get(v17_rx_state_t *s)
#else
static __inline__ complexf_t equalizer_get(v17_rx_state_t *s)
#endif
{
return cvec_circular_dot_prodf(s->eq_buf, s->eq_coeff, V17_EQUALIZER_LEN, s->eq_step);
}
/*- End of function --------------------------------------------------------*/
#if defined(SPANDSP_USE_FIXED_POINTx)
static void tune_equalizer(v17_rx_state_t *s, const complexi16_t *z, const complexi16_t *target)
{
complexi16_t err;
/* Find the x and y mismatch from the exact constellation position. */
err.re = target->re*FP_FACTOR - z->re;
err.im = target->im*FP_FACTOR - z->im;
//span_log(&s->logging, SPAN_LOG_FLOW, "Equalizer error %f\n", sqrt(err.re*err.re + err.im*err.im));
err.re = ((int32_t) err.re*(int32_t) s->eq_delta) >> 15;
err.im = ((int32_t) err.im*(int32_t) s->eq_delta) >> 15;
cvec_circular_lmsi16(s->eq_buf, s->eq_coeff, V17_EQUALIZER_LEN, s->eq_step, &err);
}
#else
static void tune_equalizer(v17_rx_state_t *s, const complexf_t *z, const complexf_t *target)
{
complexf_t err;
/* Find the x and y mismatch from the exact constellation position. */
err = complex_subf(target, z);
//span_log(&s->logging, SPAN_LOG_FLOW, "Equalizer error %f\n", sqrt(err.re*err.re + err.im*err.im));
err.re *= s->eq_delta;
err.im *= s->eq_delta;
cvec_circular_lmsf(s->eq_buf, s->eq_coeff, V17_EQUALIZER_LEN, s->eq_step, &err);
}
#endif
static int descramble(v17_rx_state_t *s, int in_bit)
{
int out_bit;
//out_bit = (in_bit ^ (s->scramble_reg >> s->scrambler_tap) ^ (s->scramble_reg >> (23 - 1))) & 1;
out_bit = (in_bit ^ (s->scramble_reg >> (18 - 1)) ^ (s->scramble_reg >> (23 - 1))) & 1;
s->scramble_reg <<= 1;
if (s->training_stage > TRAINING_STAGE_NORMAL_OPERATION && s->training_stage < TRAINING_STAGE_TCM_WINDUP)
s->scramble_reg |= out_bit;
else
s->scramble_reg |= (in_bit & 1);
return out_bit;
}
/*- End of function --------------------------------------------------------*/
static void track_carrier(v17_rx_state_t *s, const complexf_t *z, const complexf_t *target)
{
float error;
/* For small errors the imaginary part of the difference between the actual and the target
positions is proportional to the phase error, for any particular target. However, the
different amplitudes of the various target positions scale things. */
error = z->im*target->re - z->re*target->im;
s->carrier_phase_rate += (int32_t) (s->carrier_track_i*error);
s->carrier_phase += (int32_t) (s->carrier_track_p*error);
//span_log(&s->logging, SPAN_LOG_FLOW, "Im = %15.5f f = %15.5f\n", error, dds_frequencyf(s->carrier_phase_rate));
//printf("XXX Im = %15.5f f = %15.5f %f %f %f %f (%f %f)\n", error, dds_frequencyf(s->carrier_phase_rate), target->re, target->im, z->re, z->im, s->carrier_track_i, s->carrier_track_p);
}
/*- End of function --------------------------------------------------------*/
static __inline__ void put_bit(v17_rx_state_t *s, int bit)
{
int out_bit;
/* We need to strip the last part of the training - the test period of all 1s -
before we let data go to the application. */
if (s->training_stage == TRAINING_STAGE_NORMAL_OPERATION)
{
out_bit = descramble(s, bit);
s->put_bit(s->put_bit_user_data, out_bit);
}
else if (s->training_stage == TRAINING_STAGE_TEST_ONES)
{
/* The bits during the final stage of training should be all ones. However,
buggy modems mean you cannot rely on this. Therefore we don't bother
testing for ones, but just rely on a constellation mismatch measurement. */
out_bit = descramble(s, bit);
//span_log(&s->logging, SPAN_LOG_FLOW, "A 1 is really %d\n", out_bit);
}
}
/*- End of function --------------------------------------------------------*/
#if defined(SPANDSP_USE_FIXED_POINTx)
static __inline__ uint32_t dist_sq(const complexi_t *x, const complexi_t *y)
{
return (x->re - y->re)*(x->re - y->re) + (x->im - y->im)*(x->im - y->im);
}
/*- End of function --------------------------------------------------------*/
#else
static __inline__ float dist_sq(const complexf_t *x, const complexf_t *y)
{
return (x->re - y->re)*(x->re - y->re) + (x->im - y->im)*(x->im - y->im);
}
/*- End of function --------------------------------------------------------*/
#endif
static int decode_baud(v17_rx_state_t *s, complexf_t *z)
{
static const uint8_t v32bis_4800_differential_decoder[4][4] =
{
{2, 3, 0, 1},
{0, 2, 1, 3},
{3, 1, 2, 0},
{1, 0, 3, 2}
};
static const uint8_t v17_differential_decoder[4][4] =
{
{0, 1, 2, 3},
{3, 0, 1, 2},
{2, 3, 0, 1},
{1, 2, 3, 0}
};
static const uint8_t tcm_paths[8][4] =
{
{0, 6, 2, 4},
{6, 0, 4, 2},
{2, 4, 0, 6},
{4, 2, 6, 0},
{1, 3, 7, 5},
{5, 7, 3, 1},
{7, 5, 1, 3},
{3, 1, 5, 7}
};
int nearest;
int i;
int j;
int k;
int re;
int im;
int raw;
int constellation_state;
#if defined(SPANDSP_USE_FIXED_POINTx)
#define DIST_FACTOR 2048 /* Something less than sqrt(0xFFFFFFFF/10)/10 */
complexi_t zi;
uint32_t distances[8];
uint32_t new_distances[8];
uint32_t min;
complexi_t ci;
#else
float distances[8];
float new_distances[8];
float min;
#endif
re = (int) ((z->re + 9.0f)*2.0f);
if (re > 35)
re = 35;
else if (re < 0)
re = 0;
im = (int) ((z->im + 9.0f)*2.0f);
if (im > 35)
im = 35;
else if (im < 0)
im = 0;
if (s->bits_per_symbol == 2)
{
/* 4800bps V.32bis mode, without trellis coding */
nearest = constel_map_4800[re][im];
raw = v32bis_4800_differential_decoder[s->diff][nearest];
s->diff = nearest;
put_bit(s, raw);
put_bit(s, raw >> 1);
return nearest;
}
/* Find a set of 8 candidate constellation positions, that are the closest
to the target, with different patterns in the last 3 bits. */
#if defined(SPANDSP_USE_FIXED_POINTx)
min = 0xFFFFFFFF;
zi = complex_seti(z->re*DIST_FACTOR, z->im*DIST_FACTOR);
#else
min = 9999999.0f;
#endif
j = 0;
for (i = 0; i < 8; i++)
{
nearest = constel_maps[s->space_map][re][im][i];
#if defined(SPANDSP_USE_FIXED_POINTx)
ci = complex_seti(s->constellation[nearest].re*DIST_FACTOR,
s->constellation[nearest].im*DIST_FACTOR);
distances[i] = dist_sq(&ci, &zi);
#else
distances[i] = dist_sq(&s->constellation[nearest], z);
#endif
if (min > distances[i])
{
min = distances[i];
j = i;
}
}
/* Use the nearest of these soft-decisions as the basis for DFE */
constellation_state = constel_maps[s->space_map][re][im][j];
/* Control the equalizer, carrier tracking, etc. based on the non-trellis
corrected information. The trellis correct stuff comes out a bit late. */
track_carrier(s, z, &s->constellation[constellation_state]);
//tune_equalizer(s, z, &s->constellation[constellation_state]);
/* Now do the trellis decoding */
/* TODO: change to processing blocks of stored symbols here, instead of processing
one symbol at a time, to speed up the processing. */
/* Update the minimum accumulated distance to each of the 8 states */
if (++s->trellis_ptr >= V17_TRELLIS_STORAGE_DEPTH)
s->trellis_ptr = 0;
for (i = 0; i < 4; i++)
{
min = distances[tcm_paths[i][0]] + s->distances[0];
k = 0;
for (j = 1; j < 4; j++)
{
if (min > distances[tcm_paths[i][j]] + s->distances[j << 1])
{
min = distances[tcm_paths[i][j]] + s->distances[j << 1];
k = j;
}
}
/* Use an elementary IIR filter to track the distance to date. */
#if defined(SPANDSP_USE_FIXED_POINTx)
new_distances[i] = s->distances[k << 1]*9/10 + distances[tcm_paths[i][k]]*1/10;
#else
new_distances[i] = s->distances[k << 1]*0.9f + distances[tcm_paths[i][k]]*0.1f;
#endif
s->full_path_to_past_state_locations[s->trellis_ptr][i] = constel_maps[s->space_map][re][im][tcm_paths[i][k]];
s->past_state_locations[s->trellis_ptr][i] = k << 1;
}
for (i = 4; i < 8; i++)
{
min = distances[tcm_paths[i][0]] + s->distances[1];
k = 0;
for (j = 1; j < 4; j++)
{
if (min > distances[tcm_paths[i][j]] + s->distances[(j << 1) + 1])
{
min = distances[tcm_paths[i][j]] + s->distances[(j << 1) + 1];
k = j;
}
}
#if defined(SPANDSP_USE_FIXED_POINTx)
new_distances[i] = s->distances[(k << 1) + 1]*9/10 + distances[tcm_paths[i][k]]*1/10;
#else
new_distances[i] = s->distances[(k << 1) + 1]*0.9f + distances[tcm_paths[i][k]]*0.1f;
#endif
s->full_path_to_past_state_locations[s->trellis_ptr][i] = constel_maps[s->space_map][re][im][tcm_paths[i][k]];
s->past_state_locations[s->trellis_ptr][i] = (k << 1) + 1;
}
memcpy(s->distances, new_distances, sizeof(s->distances));
/* Find the minimum distance to date. This is the start of the path back to the result. */
min = s->distances[0];
k = 0;
for (i = 1; i < 8; i++)
{
if (min > s->distances[i])
{
min = s->distances[i];
k = i;
}
}
/* Trace back through every time step, starting with the current one, and find the
state from which the path came one step before. At the end of this search, the
last state found also points to the constellation point at that state. This is the
output of the trellis. */
for (i = 0, j = s->trellis_ptr; i < V17_TRELLIS_LOOKBACK_DEPTH - 1; i++)
{
k = s->past_state_locations[j][k];
if (--j < 0)
j = V17_TRELLIS_STORAGE_DEPTH - 1;
}
nearest = s->full_path_to_past_state_locations[j][k] >> 1;
/* Differentially decode */
raw = (nearest & 0x3C) | v17_differential_decoder[s->diff][nearest & 0x03];
s->diff = nearest & 0x03;
for (i = 0; i < s->bits_per_symbol; i++)
{
put_bit(s, raw);
raw >>= 1;
}
return constellation_state;
}
/*- End of function --------------------------------------------------------*/
static __inline__ void symbol_sync(v17_rx_state_t *s)
{
int i;
#if defined(SPANDSP_USE_FIXED_POINTx)
int32_t v;
int32_t p;
#else
float v;
float p;
#endif
/* This routine adapts the position of the half baud samples entering the equalizer. */
/* This symbol sync scheme is based on the technique first described by Dominique Godard in
Passband Timing Recovery in an All-Digital Modem Receiver
IEEE TRANSACTIONS ON COMMUNICATIONS, VOL. COM-26, NO. 5, MAY 1978 */
/* This is slightly rearranged for figure 3b of the Godard paper, as this saves a couple of
maths operations */
#if defined(SPANDSP_USE_FIXED_POINTx)
/* TODO: The scalings used here need more thorough evaluation, to see if overflows are possible. */
/* Cross correlate */
v = (((s->symbol_sync_low[1] >> 5)*(s->symbol_sync_high[0] >> 4)) >> 15)*SYNC_LOW_BAND_EDGE_COEFF_2
- (((s->symbol_sync_low[0] >> 5)*(s->symbol_sync_high[1] >> 4)) >> 15)*SYNC_HIGH_BAND_EDGE_COEFF_2
+ (((s->symbol_sync_low[1] >> 5)*(s->symbol_sync_high[1] >> 4)) >> 15)*SYNC_MIXED_EDGES_COEFF_3;
/* Filter away any DC component */
p = v - s->symbol_sync_dc_filter[1];
s->symbol_sync_dc_filter[1] = s->symbol_sync_dc_filter[0];
s->symbol_sync_dc_filter[0] = v;
/* A little integration will now filter away much of the HF noise */
s->baud_phase -= p;
if (abs(s->baud_phase) > 100*FP_FACTOR)
{
if (s->baud_phase > 0)
i = (s->baud_phase > 1000*FP_FACTOR) ? 15 : 1;
else
i = (s->baud_phase < -1000*FP_FACTOR) ? -15 : -1;
//printf("v = %10.5f %5d - %f %f %d %d\n", v, i, p, s->baud_phase, s->total_baud_timing_correction);
s->eq_put_step += i;
s->total_baud_timing_correction += i;
}
#else
/* Cross correlate */
v = s->symbol_sync_low[1]*s->symbol_sync_high[0]*SYNC_LOW_BAND_EDGE_COEFF_2
- s->symbol_sync_low[0]*s->symbol_sync_high[1]*SYNC_HIGH_BAND_EDGE_COEFF_2
+ s->symbol_sync_low[1]*s->symbol_sync_high[1]*SYNC_MIXED_EDGES_COEFF_3;
/* Filter away any DC component */
p = v - s->symbol_sync_dc_filter[1];
s->symbol_sync_dc_filter[1] = s->symbol_sync_dc_filter[0];
s->symbol_sync_dc_filter[0] = v;
/* A little integration will now filter away much of the HF noise */
s->baud_phase -= p;
if (fabsf(s->baud_phase) > 100.0f)
{
if (s->baud_phase > 0.0f)
i = (s->baud_phase > 1000.0f) ? 15 : 1;
else
i = (s->baud_phase < -1000.0f) ? -15 : -1;
//printf("v = %10.5f %5d - %f %f %d\n", v, i, p, s->baud_phase, s->total_baud_timing_correction);
s->eq_put_step += i;
s->total_baud_timing_correction += i;
}
#endif
}
/*- End of function --------------------------------------------------------*/
static void process_half_baud(v17_rx_state_t *s, const complexf_t *sample)
{
static const complexf_t cdba[4] =
{
{ 6.0f, 2.0f},
{-2.0f, 6.0f},
{ 2.0f, -6.0f},
{-6.0f, -2.0f}
};
complexf_t z;
complexf_t zz;
#if defined(SPANDSP_USE_FIXED_POINTx)
const complexi_t *target;
static const complexi16_t zero = {0, 0};
#else
const complexf_t *target;
static const complexf_t zero = {0, 0};
#endif
float p;
int bit;
int i;
int j;
int32_t angle;
int32_t ang;
int constellation_state;
/* This routine processes every half a baud, as we put things into the equalizer at the T/2 rate. */
/* Add a sample to the equalizer's circular buffer, but don't calculate anything at this time. */
s->eq_buf[s->eq_step] = *sample;
if (++s->eq_step >= V17_EQUALIZER_LEN)
s->eq_step = 0;
/* On alternate insertions we have a whole baud and must process it. */
if ((s->baud_half ^= 1))
return;
/* Symbol timing synchronisation */
symbol_sync(s);
z = equalizer_get(s);
constellation_state = 0;
switch (s->training_stage)
{
case TRAINING_STAGE_NORMAL_OPERATION:
/* Normal operation. */
constellation_state = decode_baud(s, &z);
target = &s->constellation[constellation_state];
break;
case TRAINING_STAGE_SYMBOL_ACQUISITION:
/* Allow time for the symbol synchronisation to settle the symbol timing. */
target = &zero;
if (++s->training_count >= 100)
{
/* Record the current phase angle */
s->angles[0] =
s->start_angles[0] = arctan2(z.im, z.re);
s->training_stage = TRAINING_STAGE_LOG_PHASE;
if (s->agc_scaling_save == 0.0f)
s->agc_scaling_save = s->agc_scaling;
}
break;
case TRAINING_STAGE_LOG_PHASE:
/* Record the current alternate phase angle */
target = &zero;
angle = arctan2(z.im, z.re);
s->training_count = 1;
if (s->short_train)
{
/* We should already know the accurate carrier frequency. All we need to sort
out is the phase. */
/* Check if we just saw A or B */
if ((uint32_t) (angle - s->start_angles[0]) < 0x80000000U)
{
angle = s->start_angles[0];
s->angles[0] = 0xC0000000 + 219937506;
s->angles[1] = 0x80000000 + 219937506;
}
else
{
s->angles[0] = 0x80000000 + 219937506;
s->angles[1] = 0xC0000000 + 219937506;
}
/* Make a step shift in the phase, to pull it into line. We need to rotate the equalizer
buffer, as well as the carrier phase, for this to play out nicely. */
/* angle is now the difference between where A is, and where it should be */
p = 3.14159f + angle*2.0f*3.14159f/(65536.0f*65536.0f) - 0.321751f;
span_log(&s->logging, SPAN_LOG_FLOW, "Spin (short) by %.5f rads\n", p);
zz = complex_setf(cosf(p), -sinf(p));
for (i = 0; i < V17_EQUALIZER_LEN; i++)
s->eq_buf[i] = complex_mulf(&s->eq_buf[i], &zz);
s->carrier_phase += (0x80000000 + angle - 219937506);
s->carrier_track_p = 500000.0f;
s->training_stage = TRAINING_STAGE_SHORT_WAIT_FOR_CDBA;
}
else
{
s->angles[1] =
s->start_angles[1] = angle;
s->training_stage = TRAINING_STAGE_WAIT_FOR_CDBA;
}
break;
case TRAINING_STAGE_WAIT_FOR_CDBA:
target = &zero;
angle = arctan2(z.im, z.re);
/* Look for the initial ABAB sequence to display a phase reversal, which will
signal the start of the scrambled CDBA segment */
ang = angle - s->angles[(s->training_count - 1) & 0xF];
s->angles[(s->training_count + 1) & 0xF] = angle;
/* Do a coarse frequency adjustment about half way through the reversals, as if we wait until
the end, we might have rotated too far to correct properly. */
if (s->training_count == 100)
{
i = s->training_count;
/* Avoid the possibility of a divide by zero */
if (i)
{
j = i & 0xF;
ang = (s->angles[j] - s->start_angles[0])/i
+ (s->angles[j | 0x1] - s->start_angles[1])/i;
s->carrier_phase_rate += 3*(ang/20);
//span_log(&s->logging, SPAN_LOG_FLOW, "Angles %x, %x, %x, %x, dist %d\n", s->angles[j], s->start_angles[0], s->angles[j | 0x1], s->start_angles[1], i);
s->start_angles[0] = s->angles[j];
s->start_angles[1] = s->angles[j | 0x1];
}
//span_log(&s->logging, SPAN_LOG_FLOW, "%d %d %d %d %d\n", s->angles[s->training_count & 0xF], s->start_angles[0], s->angles[(s->training_count | 0x1) & 0xF], s->start_angles[1], s->training_count);
span_log(&s->logging, SPAN_LOG_FLOW, "First coarse carrier frequency %7.2f (%d)\n", dds_frequencyf(s->carrier_phase_rate), s->training_count);
}
if ((ang > 0x40000000 || ang < -0x40000000) && s->training_count >= 13)
{
span_log(&s->logging, SPAN_LOG_FLOW, "We seem to have a reversal at symbol %d\n", s->training_count);
/* We seem to have a phase reversal */
/* Slam the carrier frequency into line, based on the total phase drift over the last
section. Use the shift from the odd bits and the shift from the even bits to get
better jitter suppression. */
/* TODO: We are supposed to deal with frequancy errors up to +-8Hz. Over 200+
symbols that is more than half a cycle. We get confused an do crazy things.
We can only cope with errors up to 5Hz right now. We need to implement
greater tolerance to be compliant, although it doesn't really matter much
these days. */
/* Step back a few symbols so we don't get ISI distorting things. */
i = (s->training_count - 8) & ~1;
/* Avoid the possibility of a divide by zero */
if (i - 100 + 8)
{
j = i & 0xF;
ang = (s->angles[j] - s->start_angles[0])/(i - 100 + 8)
+ (s->angles[j | 0x1] - s->start_angles[1])/(i - 100 + 8);
s->carrier_phase_rate += 3*(ang/20);
span_log(&s->logging, SPAN_LOG_FLOW, "Angles %x, %x, %x, %x, dist %d\n", s->angles[j], s->start_angles[0], s->angles[j | 0x1], s->start_angles[1], i);
}
//span_log(&s->logging, SPAN_LOG_FLOW, "%d %d %d %d %d\n", s->angles[s->training_count & 0xF], s->start_angles[0], s->angles[(s->training_count | 0x1) & 0xF], s->start_angles[1], s->training_count);
span_log(&s->logging, SPAN_LOG_FLOW, "Second coarse carrier frequency %7.2f (%d)\n", dds_frequencyf(s->carrier_phase_rate), s->training_count);
/* Check if the carrier frequency is plausible */
if (s->carrier_phase_rate < dds_phase_ratef(CARRIER_NOMINAL_FREQ - 20.0f)
||
s->carrier_phase_rate > dds_phase_ratef(CARRIER_NOMINAL_FREQ + 20.0f))
{
span_log(&s->logging, SPAN_LOG_FLOW, "Training failed (sequence failed)\n");
/* Park this modem */
s->agc_scaling_save = 0.0f;
s->training_stage = TRAINING_STAGE_PARKED;
report_status_change(s, SIG_STATUS_TRAINING_FAILED);
break;
}
/* Make a step shift in the phase, to pull it into line. We need to rotate the equalizer buffer,
as well as the carrier phase, for this to play out nicely. */
/* angle is now the difference between where C is, and where it should be */
p = angle*2.0f*3.14159f/(65536.0f*65536.0f) - 0.321751f;
span_log(&s->logging, SPAN_LOG_FLOW, "Spin (long) by %.5f rads\n", p);
zz = complex_setf(cosf(p), -sinf(p));
for (i = 0; i < V17_EQUALIZER_LEN; i++)
s->eq_buf[i] = complex_mulf(&s->eq_buf[i], &zz);
s->carrier_phase += (angle - 219937506);
/* We have just seen the first symbol of the scrambled sequence, so skip it. */
bit = descramble(s, 1);
bit = (bit << 1) | descramble(s, 1);
target = &cdba[bit];
s->training_count = 1;
s->training_stage = TRAINING_STAGE_COARSE_TRAIN_ON_CDBA;
report_status_change(s, SIG_STATUS_TRAINING_IN_PROGRESS);
break;
}
if (++s->training_count > V17_TRAINING_SEG_1_LEN)
{
/* This is bogus. There are not this many bits in this section
of a real training sequence. Note that this might be TEP. */
span_log(&s->logging, SPAN_LOG_FLOW, "Training failed (sequence failed)\n");
/* Park this modem */
s->agc_scaling_save = 0.0f;
s->training_stage = TRAINING_STAGE_PARKED;
report_status_change(s, SIG_STATUS_TRAINING_FAILED);
}
break;
case TRAINING_STAGE_COARSE_TRAIN_ON_CDBA:
/* Train on the scrambled CDBA section. */
bit = descramble(s, 1);
bit = (bit << 1) | descramble(s, 1);
target = &cdba[bit];
track_carrier(s, &z, target);
tune_equalizer(s, &z, target);
#if defined(IAXMODEM_STUFF)
zz = complex_subf(&z, target);
s->training_error = powerf(&zz);
if (++s->training_count == V17_TRAINING_SEG_2_LEN - 2000 || s->training_error < 1.0f || s->training_error > 200.0f)
#else
if (++s->training_count == V17_TRAINING_SEG_2_LEN - 2000)
#endif
{
/* Now the equaliser adaption should be getting somewhere, slow it down, or it will never
tune very well on a noisy signal. */
s->eq_delta *= EQUALIZER_SLOW_ADAPT_RATIO;
s->carrier_track_i = 1000.0f;
s->training_stage = TRAINING_STAGE_FINE_TRAIN_ON_CDBA;
}
break;
case TRAINING_STAGE_FINE_TRAIN_ON_CDBA:
/* Train on the scrambled CDBA section. */
bit = descramble(s, 1);
bit = (bit << 1) | descramble(s, 1);
target = &cdba[bit];
/* By this point the training should be comming into focus. */
track_carrier(s, &z, target);
tune_equalizer(s, &z, target);
if (++s->training_count >= V17_TRAINING_SEG_2_LEN - 48)
{
s->training_error = 0.0f;
s->carrier_track_i = 100.0f;
s->carrier_track_p = 500000.0f;
s->training_stage = TRAINING_STAGE_TRAIN_ON_CDBA_AND_TEST;
}
break;
case TRAINING_STAGE_TRAIN_ON_CDBA_AND_TEST:
/* Continue training on the scrambled CDBA section, but measure the quality of training too. */
bit = descramble(s, 1);
bit = (bit << 1) | descramble(s, 1);
target = &cdba[bit];
//span_log(&s->logging, SPAN_LOG_FLOW, "%5d [%15.5f, %15.5f] [%15.5f, %15.5f]\n", s->training_count, z.re, z.im, cdba[bit].re, cdba[bit].im);
/* We ignore the last few symbols because it seems some modems do not end this
part properly, and it throws things off. */
if (++s->training_count < V17_TRAINING_SEG_2_LEN - 20)
{
track_carrier(s, &z, target);
tune_equalizer(s, &z, target);
/* Measure the training error */
zz = complex_subf(&z, &cdba[bit]);
s->training_error += powerf(&zz);
}
else if (s->training_count >= V17_TRAINING_SEG_2_LEN)
{
span_log(&s->logging, SPAN_LOG_FLOW, "Long training error %f\n", s->training_error);
if (s->training_error < 20.0f*1.414f*constellation_spacing[s->space_map])
{
s->training_count = 0;
s->training_error = 0.0f;
s->training_stage = TRAINING_STAGE_BRIDGE;
}
else
{
span_log(&s->logging, SPAN_LOG_FLOW, "Training failed (convergence failed)\n");
/* Park this modem */
s->agc_scaling_save = 0.0f;
s->training_stage = TRAINING_STAGE_PARKED;
report_status_change(s, SIG_STATUS_TRAINING_FAILED);
}
}
break;
case TRAINING_STAGE_BRIDGE:
descramble(s, V17_BRIDGE_WORD >> ((s->training_count & 0x7) << 1));
descramble(s, V17_BRIDGE_WORD >> (((s->training_count & 0x7) << 1) + 1));
target = &z;
if (++s->training_count >= V17_TRAINING_SEG_3_LEN)
{
s->training_count = 0;
s->training_error = 0.0f;
if (s->bits_per_symbol == 2)
{
/* Restart the differential decoder */
/* There is no trellis, so go straight to processing decoded data */
s->diff = (s->short_train) ? 0 : 1;
s->training_stage = TRAINING_STAGE_TEST_ONES;
}
else
{
/* Wait for the trellis to wind up */
s->training_stage = TRAINING_STAGE_TCM_WINDUP;
}
}
break;
case TRAINING_STAGE_SHORT_WAIT_FOR_CDBA:
/* Look for the initial ABAB sequence to display a phase reversal, which will
signal the start of the scrambled CDBA segment */
angle = arctan2(z.im, z.re);
ang = angle - s->angles[s->training_count & 1];
if (ang > 0x40000000 || ang < -0x40000000)
{
/* We seem to have a phase reversal */
/* We have just seen the first symbol of the scrambled sequence, so skip it. */
bit = descramble(s, 1);
bit = (bit << 1) | descramble(s, 1);
target = &cdba[bit];
s->training_count = 1;
s->training_error = 0.0f;
s->training_stage = TRAINING_STAGE_SHORT_TRAIN_ON_CDBA_AND_TEST;
break;
}
target = &cdba[(s->training_count & 1) + 2];
track_carrier(s, &z, target);
if (++s->training_count > V17_TRAINING_SEG_1_LEN)
{
/* This is bogus. There are not this many bits in this section
of a real training sequence. Note that this might be TEP. */
span_log(&s->logging, SPAN_LOG_FLOW, "Training failed (sequence failed)\n");
/* Park this modem */
s->training_stage = TRAINING_STAGE_PARKED;
report_status_change(s, SIG_STATUS_TRAINING_FAILED);
}
break;
case TRAINING_STAGE_SHORT_TRAIN_ON_CDBA_AND_TEST:
/* Short retrain on the scrambled CDBA section, but measure the quality of training too. */
bit = descramble(s, 1);
bit = (bit << 1) | descramble(s, 1);
//span_log(&s->logging, SPAN_LOG_FLOW, "%5d [%15.5f, %15.5f] [%15.5f, %15.5f] %d\n", s->training_count, z.re, z.im, cdba[bit].re, cdba[bit].im, arctan2(z.im, z.re));
target = &cdba[bit];
track_carrier(s, &z, target);
//tune_equalizer(s, &z, target);
/* Measure the training error */
if (s->training_count > 8)
{
zz = complex_subf(&z, &cdba[bit]);
s->training_error += powerf(&zz);
}
if (++s->training_count >= V17_TRAINING_SHORT_SEG_2_LEN)
{
span_log(&s->logging, SPAN_LOG_FLOW, "Short training error %f\n", s->training_error);
s->carrier_track_i = 100.0f;
s->carrier_track_p = 500000.0f;
/* TODO: This was increased by a factor of 10 after studying real world failures.
However, it is not clear why this is an improvement, If something gives
a huge training error, surely it shouldn't decode too well? */
if (s->training_error < (V17_TRAINING_SHORT_SEG_2_LEN - 8)*4.0f*constellation_spacing[s->space_map])
{
s->training_count = 0;
if (s->bits_per_symbol == 2)
{
/* There is no trellis, so go straight to processing decoded data */
/* Restart the differential decoder */
s->diff = (s->short_train) ? 0 : 1;
s->training_error = 0.0f;
s->training_stage = TRAINING_STAGE_TEST_ONES;
}
else
{
/* Wait for the trellis to wind up */
s->training_stage = TRAINING_STAGE_TCM_WINDUP;
}
report_status_change(s, SIG_STATUS_TRAINING_IN_PROGRESS);
}
else
{
span_log(&s->logging, SPAN_LOG_FLOW, "Short training failed (convergence failed)\n");
/* Park this modem */
s->training_stage = TRAINING_STAGE_PARKED;
report_status_change(s, SIG_STATUS_TRAINING_FAILED);
}
}
break;
case TRAINING_STAGE_TCM_WINDUP:
/* We need to wait 15 bauds while the trellis fills up. */
//span_log(&s->logging, SPAN_LOG_FLOW, "%5d %15.5f, %15.5f\n", s->training_count, z.re, z.im);
constellation_state = decode_baud(s, &z);
target = &s->constellation[constellation_state];
/* Measure the training error */
zz = complex_subf(&z, target);
s->training_error += powerf(&zz);
if (++s->training_count >= V17_TRAINING_SEG_4A_LEN)
{
s->training_count = 0;
s->training_error = 0.0f;
/* Restart the differential decoder */
s->diff = (s->short_train) ? 0 : 1;
s->training_stage = TRAINING_STAGE_TEST_ONES;
}
break;
case TRAINING_STAGE_TEST_ONES:
/* We are in the test phase, where we check that we can receive reliably.
We should get a run of 1's, 48 symbols long. */
//span_log(&s->logging, SPAN_LOG_FLOW, "%5d %15.5f, %15.5f\n", s->training_count, z.re, z.im);
constellation_state = decode_baud(s, &z);
target = &s->constellation[constellation_state];
/* Measure the training error */
zz = complex_subf(&z, target);
s->training_error += powerf(&zz);
if (++s->training_count >= V17_TRAINING_SEG_4_LEN)
{
if (s->training_error < V17_TRAINING_SEG_4_LEN*constellation_spacing[s->space_map])
{
/* We are up and running */
span_log(&s->logging, SPAN_LOG_FLOW, "Training succeeded at %dbps (constellation mismatch %f)\n", s->bit_rate, s->training_error);
report_status_change(s, SIG_STATUS_TRAINING_SUCCEEDED);
/* Apply some lag to the carrier off condition, to ensure the last few bits get pushed through
the processing. */
s->signal_present = 60;
equalizer_save(s);
s->carrier_phase_rate_save = s->carrier_phase_rate;
s->short_train = TRUE;
s->training_stage = TRAINING_STAGE_NORMAL_OPERATION;
}
else
{
/* Training has failed */
span_log(&s->logging, SPAN_LOG_FLOW, "Training failed (constellation mismatch %f)\n", s->training_error);
/* Park this modem */
if (!s->short_train)
s->agc_scaling_save = 0.0f;
s->training_stage = TRAINING_STAGE_PARKED;
report_status_change(s, SIG_STATUS_TRAINING_FAILED);
}
}
break;
case TRAINING_STAGE_PARKED:
default:
/* We failed to train! */
/* Park here until the carrier drops. */
target = &zero;
break;
}
if (s->qam_report)
s->qam_report(s->qam_user_data, &z, target, constellation_state);
}
/*- End of function --------------------------------------------------------*/
static __inline__ int signal_detect(v17_rx_state_t *s, int16_t amp)
{
int16_t diff;
int16_t x;
int32_t power;
/* There should be no DC in the signal, but sometimes there is.
We need to measure the power with the DC blocked, but not using
a slow to respond DC blocker. Use the most elementary HPF. */
x = amp >> 1;
/* There could be overflow here, but it isn't a problem in practice */
diff = x - s->last_sample;
s->last_sample = x;
power = power_meter_update(&(s->power), diff);
#if defined(IAXMODEM_STUFF)
/* Quick power drop fudge */
diff = abs(diff);
if (10*diff < s->high_sample)
{
if (++s->low_samples > 120)
{
power_meter_init(&(s->power), 4);
s->high_sample = 0;
s->low_samples = 0;
}
}
else
{
s->low_samples = 0;
if (diff > s->high_sample)
s->high_sample = diff;
}
#endif
if (s->signal_present > 0)
{
/* Look for power below turn-off threshold to turn the carrier off */
#if defined(IAXMODEM_STUFF)
if (s->carrier_drop_pending || power < s->carrier_off_power)
#else
if (power < s->carrier_off_power)
#endif
{
if (--s->signal_present <= 0)
{
/* Count down a short delay, to ensure we push the last
few bits through the filters before stopping. */
v17_rx_restart(s, s->bit_rate, s->short_train);
report_status_change(s, SIG_STATUS_CARRIER_DOWN);
return 0;
}
#if defined(IAXMODEM_STUFF)
/* Carrier has dropped, but the put_bit is pending the signal_present delay. */
s->carrier_drop_pending = TRUE;
#endif
}
}
else
{
/* Look for power exceeding turn-on threshold to turn the carrier on */
if (power < s->carrier_on_power)
return 0;
s->signal_present = 1;
#if defined(IAXMODEM_STUFF)
s->carrier_drop_pending = FALSE;
#endif
report_status_change(s, SIG_STATUS_CARRIER_UP);
}
return power;
}
/*- End of function --------------------------------------------------------*/
SPAN_DECLARE_NONSTD(int) v17_rx(v17_rx_state_t *s, const int16_t amp[], int len)
{
int i;
int step;
complexf_t z;
complexf_t zz;
complexf_t sample;
#if defined(SPANDSP_USE_FIXED_POINT)
int32_t vi;
#endif
#if defined(SPANDSP_USE_FIXED_POINTx)
int32_t v;
#else
float v;
#endif
int32_t power;
for (i = 0; i < len; i++)
{
s->rrc_filter[s->rrc_filter_step] = amp[i];
if (++s->rrc_filter_step >= V17_RX_FILTER_STEPS)
s->rrc_filter_step = 0;
if ((power = signal_detect(s, amp[i])) == 0)
continue;
if (s->training_stage == TRAINING_STAGE_PARKED)
continue;
/* Only spend effort processing this data if the modem is not
parked, after training failure. */
s->eq_put_step -= RX_PULSESHAPER_COEFF_SETS;
step = -s->eq_put_step;
if (step > RX_PULSESHAPER_COEFF_SETS - 1)
step = RX_PULSESHAPER_COEFF_SETS - 1;
if (step < 0)
step += RX_PULSESHAPER_COEFF_SETS;
#if defined(SPANDSP_USE_FIXED_POINT)
vi = vec_circular_dot_prodi16(s->rrc_filter, rx_pulseshaper_re[step], V17_RX_FILTER_STEPS, s->rrc_filter_step);
//sample.re = (vi*(int32_t) s->agc_scaling) >> 15;
sample.re = vi*s->agc_scaling;
#else
v = vec_circular_dot_prodf(s->rrc_filter, rx_pulseshaper_re[step], V17_RX_FILTER_STEPS, s->rrc_filter_step);
sample.re = v*s->agc_scaling;
#endif
/* Symbol timing synchronisation band edge filters */
/* Low Nyquist band edge filter */
v = s->symbol_sync_low[0]*SYNC_LOW_BAND_EDGE_COEFF_0 + s->symbol_sync_low[1]*SYNC_LOW_BAND_EDGE_COEFF_1 + sample.re;
s->symbol_sync_low[1] = s->symbol_sync_low[0];
s->symbol_sync_low[0] = v;
/* High Nyquist band edge filter */
v = s->symbol_sync_high[0]*SYNC_HIGH_BAND_EDGE_COEFF_0 + s->symbol_sync_high[1]*SYNC_HIGH_BAND_EDGE_COEFF_1 + sample.re;
s->symbol_sync_high[1] = s->symbol_sync_high[0];
s->symbol_sync_high[0] = v;
/* Put things into the equalization buffer at T/2 rate. The symbol sync.
will fiddle the step to align this with the symbols. */
if (s->eq_put_step <= 0)
{
/* Only AGC until we have locked down the setting. */
if (s->agc_scaling_save == 0.0f)
s->agc_scaling = (1.0f/RX_PULSESHAPER_GAIN)*2.17f/sqrtf(power);
/* Pulse shape while still at the carrier frequency, using a quadrature
pair of filters. This results in a properly bandpass filtered complex
signal, which can be brought directly to baseband by complex mixing.
No further filtering, to remove mixer harmonics, is needed. */
step = -s->eq_put_step;
if (step > RX_PULSESHAPER_COEFF_SETS - 1)
step = RX_PULSESHAPER_COEFF_SETS - 1;
s->eq_put_step += RX_PULSESHAPER_COEFF_SETS*10/(3*2);
#if defined(SPANDSP_USE_FIXED_POINT)
vi = vec_circular_dot_prodi16(s->rrc_filter, rx_pulseshaper_im[step], V17_RX_FILTER_STEPS, s->rrc_filter_step);
//sample.im = (vi*(int32_t) s->agc_scaling) >> 15;
sample.im = vi*s->agc_scaling;
z = dds_lookup_complexf(s->carrier_phase);
zz.re = sample.re*z.re - sample.im*z.im;
zz.im = -sample.re*z.im - sample.im*z.re;
#else
v = vec_circular_dot_prodf(s->rrc_filter, rx_pulseshaper_im[step], V17_RX_FILTER_STEPS, s->rrc_filter_step);
sample.im = v*s->agc_scaling;
z = dds_lookup_complexf(s->carrier_phase);
zz.re = sample.re*z.re - sample.im*z.im;
zz.im = -sample.re*z.im - sample.im*z.re;
#endif
process_half_baud(s, &zz);
}
#if defined(SPANDSP_USE_FIXED_POINT)
dds_advance(&s->carrier_phase, s->carrier_phase_rate);
#else
dds_advancef(&s->carrier_phase, s->carrier_phase_rate);
#endif
}
return 0;
}
/*- End of function --------------------------------------------------------*/
SPAN_DECLARE(int) v17_rx_fillin(v17_rx_state_t *s, int len)
{
int i;
/* We want to sustain the current state (i.e carrier on<->carrier off), and
try to sustain the carrier phase. We should probably push the filters, as well */
span_log(&s->logging, SPAN_LOG_FLOW, "Fill-in %d samples\n", len);
if (s->signal_present <= 0)
return 0;
if (s->training_stage == TRAINING_STAGE_PARKED)
return 0;
for (i = 0; i < len; i++)
{
#if defined(SPANDSP_USE_FIXED_POINT)
dds_advance(&s->carrier_phase, s->carrier_phase_rate);
#else
dds_advancef(&s->carrier_phase, s->carrier_phase_rate);
#endif
/* Advance the symbol phase the appropriate amount */
s->eq_put_step -= RX_PULSESHAPER_COEFF_SETS;
if (s->eq_put_step <= 0)
s->eq_put_step += RX_PULSESHAPER_COEFF_SETS*10/(3*2);
/* TODO: Should we rotate any buffers */
}
return 0;
}
/*- End of function --------------------------------------------------------*/
SPAN_DECLARE(void) v17_rx_set_put_bit(v17_rx_state_t *s, put_bit_func_t put_bit, void *user_data)
{
s->put_bit = put_bit;
s->put_bit_user_data = user_data;
}
/*- End of function --------------------------------------------------------*/
SPAN_DECLARE(void) v17_rx_set_modem_status_handler(v17_rx_state_t *s, modem_tx_status_func_t handler, void *user_data)
{
s->status_handler = handler;
s->status_user_data = user_data;
}
/*- End of function --------------------------------------------------------*/
SPAN_DECLARE(logging_state_t *) v17_rx_get_logging_state(v17_rx_state_t *s)
{
return &s->logging;
}
/*- End of function --------------------------------------------------------*/
SPAN_DECLARE(int) v17_rx_restart(v17_rx_state_t *s, int bit_rate, int short_train)
{
int i;
span_log(&s->logging, SPAN_LOG_FLOW, "Restarting V.17, %dbps, %s training\n", bit_rate, (short_train) ? "short" : "long");
switch (bit_rate)
{
case 14400:
s->constellation = v17_v32bis_14400_constellation;
s->space_map = 0;
s->bits_per_symbol = 6;
break;
case 12000:
s->constellation = v17_v32bis_12000_constellation;
s->space_map = 1;
s->bits_per_symbol = 5;
break;
case 9600:
s->constellation = v17_v32bis_9600_constellation;
s->space_map = 2;
s->bits_per_symbol = 4;
break;
case 7200:
s->constellation = v17_v32bis_7200_constellation;
s->space_map = 3;
s->bits_per_symbol = 3;
break;
case 4800:
/* This does not exist in the V.17 spec as a valid mode of operation.
However, it does exist in V.32bis, so it is here for completeness. */
s->constellation = v17_v32bis_4800_constellation;
s->space_map = 0;
s->bits_per_symbol = 2;
break;
default:
return -1;
}
s->bit_rate = bit_rate;
#if defined(SPANDSP_USE_FIXED_POINT)
vec_zeroi16(s->rrc_filter, sizeof(s->rrc_filter)/sizeof(s->rrc_filter[0]));
#else
vec_zerof(s->rrc_filter, sizeof(s->rrc_filter)/sizeof(s->rrc_filter[0]));
#endif
s->rrc_filter_step = 0;
s->diff = 1;
s->scramble_reg = 0x2ECDD5;
s->training_stage = TRAINING_STAGE_SYMBOL_ACQUISITION;
s->training_count = 0;
s->training_error = 0.0f;
s->signal_present = 0;
#if defined(IAXMODEM_STUFF)
s->high_sample = 0;
s->low_samples = 0;
s->carrier_drop_pending = FALSE;
#endif
if (short_train != 2)
s->short_train = short_train;
memset(s->start_angles, 0, sizeof(s->start_angles));
memset(s->angles, 0, sizeof(s->angles));
/* Initialise the TCM decoder parameters. */
/* The accumulated distance vectors are set so state zero starts
at a value of zero, and all others start larger. This forces the
initial paths to merge at the zero states. */
for (i = 0; i < 8; i++)
#if defined(SPANDSP_USE_FIXED_POINTx)
s->distances[i] = 99*DIST_FACTOR*DIST_FACTOR;
#else
s->distances[i] = 99.0f;
#endif
memset(s->full_path_to_past_state_locations, 0, sizeof(s->full_path_to_past_state_locations));
memset(s->past_state_locations, 0, sizeof(s->past_state_locations));
s->distances[0] = 0;
s->trellis_ptr = 14;
span_log(&s->logging, SPAN_LOG_FLOW, "Phase rates %f %f\n", dds_frequencyf(s->carrier_phase_rate), dds_frequencyf(s->carrier_phase_rate_save));
s->carrier_phase = 0;
power_meter_init(&(s->power), 4);
if (s->short_train)
{
s->carrier_phase_rate = s->carrier_phase_rate_save;
s->agc_scaling = s->agc_scaling_save;
equalizer_restore(s);
/* Don't allow any frequency correction at all, until we start to pull the phase in. */
#if defined(SPANDSP_USE_FIXED_POINTx)
s->carrier_track_i = 0;
s->carrier_track_p = 40000;
#else
s->carrier_track_i = 0.0f;
s->carrier_track_p = 40000.0f;
#endif
}
else
{
s->carrier_phase_rate = dds_phase_ratef(CARRIER_NOMINAL_FREQ);
equalizer_reset(s);
#if defined(SPANDSP_USE_FIXED_POINTx)
s->agc_scaling_save = 0;
s->agc_scaling = (float) FP_FACTOR*32768.0f*0.0017f/RX_PULSESHAPER_GAIN;
s->carrier_track_i = 5000;
s->carrier_track_p = 40000;
#else
s->agc_scaling_save = 0.0f;
s->agc_scaling = 0.0017f/RX_PULSESHAPER_GAIN;
s->carrier_track_i = 5000.0f;
s->carrier_track_p = 40000.0f;
#endif
}
s->last_sample = 0;
/* Initialise the working data for symbol timing synchronisation */
#if defined(SPANDSP_USE_FIXED_POINTx)
for (i = 0; i < 2; i++)
{
s->symbol_sync_low[i] = 0;
s->symbol_sync_high[i] = 0;
s->symbol_sync_dc_filter[i] = 0;
}
s->baud_phase = 0;
#else
for (i = 0; i < 2; i++)
{
s->symbol_sync_low[i] = 0.0f;
s->symbol_sync_high[i] = 0.0f;
s->symbol_sync_dc_filter[i] = 0.0f;
}
s->baud_phase = 0.0f;
#endif
s->baud_half = 0;
s->total_baud_timing_correction = 0;
return 0;
}
/*- End of function --------------------------------------------------------*/
SPAN_DECLARE(v17_rx_state_t *) v17_rx_init(v17_rx_state_t *s, int bit_rate, put_bit_func_t put_bit, void *user_data)
{
switch (bit_rate)
{
case 14400:
case 12000:
case 9600:
case 7200:
case 4800:
/* 4800 is an extension of V.17, to provide full converage of the V.32bis modes */
break;
default:
return NULL;
}
if (s == NULL)
{
if ((s = (v17_rx_state_t *) malloc(sizeof(*s))) == NULL)
return NULL;
}
memset(s, 0, sizeof(*s));
span_log_init(&s->logging, SPAN_LOG_NONE, NULL);
span_log_set_protocol(&s->logging, "V.17 RX");
s->put_bit = put_bit;
s->put_bit_user_data = user_data;
s->short_train = FALSE;
//s->scrambler_tap = 18 - 1;
v17_rx_signal_cutoff(s, -45.5f);
s->agc_scaling = 0.0017f/RX_PULSESHAPER_GAIN;
s->agc_scaling_save = 0.0f;
s->carrier_phase_rate_save = dds_phase_ratef(CARRIER_NOMINAL_FREQ);
v17_rx_restart(s, bit_rate, s->short_train);
return s;
}
/*- End of function --------------------------------------------------------*/
SPAN_DECLARE(int) v17_rx_release(v17_rx_state_t *s)
{
return 0;
}
/*- End of function --------------------------------------------------------*/
SPAN_DECLARE(int) v17_rx_free(v17_rx_state_t *s)
{
free(s);
return 0;
}
/*- End of function --------------------------------------------------------*/
SPAN_DECLARE(void) v17_rx_set_qam_report_handler(v17_rx_state_t *s, qam_report_handler_t handler, void *user_data)
{
s->qam_report = handler;
s->qam_user_data = user_data;
}
/*- End of function --------------------------------------------------------*/
/*- End of file ------------------------------------------------------------*/
Reference in New Issue View Git Blame Copy Permalink