kenmirrors
/
freeswitch
mirror of https://github.com/signalwire/freeswitch.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity
freeswitch/libs/js/nsprpub/pr/src/pthreads/ptthread.c

1546 lines
46 KiB
C
Raw Blame History

/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
/* ***** BEGIN LICENSE BLOCK *****
* Version: MPL 1.1/GPL 2.0/LGPL 2.1
*
* The contents of this file are subject to the Mozilla Public License Version
* 1.1 (the "License"); you may not use this file except in compliance with
* the License. You may obtain a copy of the License at
* http://www.mozilla.org/MPL/
*
* Software distributed under the License is distributed on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
* for the specific language governing rights and limitations under the
* License.
*
* The Original Code is the Netscape Portable Runtime (NSPR).
*
* The Initial Developer of the Original Code is
* Netscape Communications Corporation.
* Portions created by the Initial Developer are Copyright (C) 1998-2000
* the Initial Developer. All Rights Reserved.
*
* Contributor(s):
*
* Alternatively, the contents of this file may be used under the terms of
* either the GNU General Public License Version 2 or later (the "GPL"), or
* the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
* in which case the provisions of the GPL or the LGPL are applicable instead
* of those above. If you wish to allow use of your version of this file only
* under the terms of either the GPL or the LGPL, and not to allow others to
* use your version of this file under the terms of the MPL, indicate your
* decision by deleting the provisions above and replace them with the notice
* and other provisions required by the GPL or the LGPL. If you do not delete
* the provisions above, a recipient may use your version of this file under
* the terms of any one of the MPL, the GPL or the LGPL.
*
* ***** END LICENSE BLOCK ***** */
/*
** File: ptthread.c
** Descritpion: Implemenation for threds using pthreds
** Exports: ptthread.h
*/
#if defined(_PR_PTHREADS) || defined(_PR_DCETHREADS)
#include "prlog.h"
#include "primpl.h"
#include "prpdce.h"
#include <pthread.h>
#include <unistd.h>
#include <string.h>
#include <signal.h>
/*
* Record whether or not we have the privilege to set the scheduling
* policy and priority of threads. 0 means that privilege is available.
* EPERM means that privilege is not available.
*/
static PRIntn pt_schedpriv = 0;
extern PRLock *_pr_sleeplock;
static struct _PT_Bookeeping
{
PRLock *ml; /* a lock to protect ourselves */
PRCondVar *cv; /* used to signal global things */
PRInt32 system, user; /* a count of the two different types */
PRUintn this_many; /* number of threads allowed for exit */
pthread_key_t key; /* private private data key */
PRThread *first, *last; /* list of threads we know about */
#if defined(_PR_DCETHREADS) || defined(_POSIX_THREAD_PRIORITY_SCHEDULING)
PRInt32 minPrio, maxPrio; /* range of scheduling priorities */
#endif
} pt_book = {0};
static void _pt_thread_death(void *arg);
static void init_pthread_gc_support(void);
#if defined(_PR_DCETHREADS) || defined(_POSIX_THREAD_PRIORITY_SCHEDULING)
static PRIntn pt_PriorityMap(PRThreadPriority pri)
{
#ifdef NTO
/* This priority algorithm causes lots of problems on Neutrino
* for now I have just hard coded everything to run at priority 10
* until I can come up with a new algorithm.
* Jerry.Kirk@Nexwarecorp.com
*/
return 10;
#else
return pt_book.minPrio +
pri * (pt_book.maxPrio - pt_book.minPrio) / PR_PRIORITY_LAST;
#endif
}
#endif
#if defined(GC_LEAK_DETECTOR) && (__GLIBC__ >= 2) && defined(__i386__)
#include <setjmp.h>
typedef struct stack_frame stack_frame;
struct stack_frame {
stack_frame* next;
void* pc;
};
static stack_frame* GetStackFrame()
{
jmp_buf jb;
stack_frame* currentFrame;
setjmp(jb);
currentFrame = (stack_frame*)(jb[0].__jmpbuf[JB_BP]);
currentFrame = currentFrame->next;
return currentFrame;
}
static void* GetStackTop()
{
stack_frame* frame;
frame = GetStackFrame();
while (frame != NULL)
{
ptrdiff_t pc = (ptrdiff_t)frame->pc;
if ((pc < 0x08000000) || (pc > 0x7fffffff) || (frame->next < frame))
return frame;
frame = frame->next;
}
return NULL;
}
#endif /* GC_LEAK_DETECTOR && (__GLIBC__ >= 2) && __i386__ */
/*
** Initialize a stack for a native pthread thread
*/
static void _PR_InitializeStack(PRThreadStack *ts)
{
if( ts && (ts->stackTop == 0) ) {
ts->allocBase = (char *) &ts;
ts->allocSize = ts->stackSize;
/*
** Setup stackTop and stackBottom values.
*/
#ifdef HAVE_STACK_GROWING_UP
ts->stackBottom = ts->allocBase + ts->stackSize;
ts->stackTop = ts->allocBase;
#else
#ifdef GC_LEAK_DETECTOR
ts->stackTop = GetStackTop();
ts->stackBottom = ts->stackTop - ts->stackSize;
#else
ts->stackTop = ts->allocBase;
ts->stackBottom = ts->allocBase - ts->stackSize;
#endif
#endif
}
}
static void *_pt_root(void *arg)
{
PRIntn rv;
PRThread *thred = (PRThread*)arg;
PRBool detached = (thred->state & PT_THREAD_DETACHED) ? PR_TRUE : PR_FALSE;
/*
* Both the parent thread and this new thread set thred->id.
* The new thread must ensure that thred->id is set before
* it executes its startFunc. The parent thread must ensure
* that thred->id is set before PR_CreateThread() returns.
* Both threads set thred->id without holding a lock. Since
* they are writing the same value, this unprotected double
* write should be safe.
*/
thred->id = pthread_self();
/*
** DCE Threads can't detach during creation, so do it late.
** I would like to do it only here, but that doesn't seem
** to work.
*/
#if defined(_PR_DCETHREADS)
if (detached)
{
/* pthread_detach() modifies its argument, so we must pass a copy */
pthread_t self = thred->id;
rv = pthread_detach(&self);
PR_ASSERT(0 == rv);
}
#endif /* defined(_PR_DCETHREADS) */
/* Set up the thread stack information */
_PR_InitializeStack(thred->stack);
/*
* Set within the current thread the pointer to our object.
* This object will be deleted when the thread termintates,
* whether in a join or detached (see _PR_InitThreads()).
*/
rv = pthread_setspecific(pt_book.key, thred);
PR_ASSERT(0 == rv);
/* make the thread visible to the rest of the runtime */
PR_Lock(pt_book.ml);
/* If this is a GCABLE thread, set its state appropriately */
if (thred->suspend & PT_THREAD_SETGCABLE)
thred->state |= PT_THREAD_GCABLE;
thred->suspend = 0;
thred->prev = pt_book.last;
if (pt_book.last)
pt_book.last->next = thred;
else
pt_book.first = thred;
thred->next = NULL;
pt_book.last = thred;
PR_Unlock(pt_book.ml);
thred->startFunc(thred->arg); /* make visible to the client */
/* unhook the thread from the runtime */
PR_Lock(pt_book.ml);
/*
* At this moment, PR_CreateThread() may not have set thred->id yet.
* It is safe for a detached thread to free thred only after
* PR_CreateThread() has set thred->id.
*/
if (detached)
{
while (!thred->okToDelete)
PR_WaitCondVar(pt_book.cv, PR_INTERVAL_NO_TIMEOUT);
}
if (thred->state & PT_THREAD_SYSTEM)
pt_book.system -= 1;
else if (--pt_book.user == pt_book.this_many)
PR_NotifyAllCondVar(pt_book.cv);
if (NULL == thred->prev)
pt_book.first = thred->next;
else
thred->prev->next = thred->next;
if (NULL == thred->next)
pt_book.last = thred->prev;
else
thred->next->prev = thred->prev;
PR_Unlock(pt_book.ml);
/*
* Here we set the pthread's backpointer to the PRThread to NULL.
* Otherwise the destructor would get called eagerly as the thread
* returns to the pthread runtime. The joining thread would them be
* the proud possessor of a dangling reference. However, this is the
* last chance to delete the object if the thread is detached, so
* just let the destructor do the work.
*/
if (PR_FALSE == detached)
{
rv = pthread_setspecific(pt_book.key, NULL);
PR_ASSERT(0 == rv);
}
return NULL;
} /* _pt_root */
static PRThread* pt_AttachThread(void)
{
PRThread *thred = NULL;
/*
* NSPR must have been initialized when PR_AttachThread is called.
* We cannot have PR_AttachThread call implicit initialization
* because if multiple threads call PR_AttachThread simultaneously,
* NSPR may be initialized more than once.
* We can't call any function that calls PR_GetCurrentThread()
* either (e.g., PR_SetError()) as that will result in infinite
* recursion.
*/
if (!_pr_initialized) return NULL;
/* PR_NEWZAP must not call PR_GetCurrentThread() */
thred = PR_NEWZAP(PRThread);
if (NULL != thred)
{
int rv;
thred->priority = PR_PRIORITY_NORMAL;
thred->id = pthread_self();
rv = pthread_setspecific(pt_book.key, thred);
PR_ASSERT(0 == rv);
thred->state = PT_THREAD_GLOBAL | PT_THREAD_FOREIGN;
PR_Lock(pt_book.ml);
/* then put it into the list */
thred->prev = pt_book.last;
if (pt_book.last)
pt_book.last->next = thred;
else
pt_book.first = thred;
thred->next = NULL;
pt_book.last = thred;
PR_Unlock(pt_book.ml);
}
return thred; /* may be NULL */
} /* pt_AttachThread */
static PRThread* _PR_CreateThread(
PRThreadType type, void (*start)(void *arg),
void *arg, PRThreadPriority priority, PRThreadScope scope,
PRThreadState state, PRUint32 stackSize, PRBool isGCAble)
{
int rv;
PRThread *thred;
pthread_attr_t tattr;
if (!_pr_initialized) _PR_ImplicitInitialization();
if ((PRIntn)PR_PRIORITY_FIRST > (PRIntn)priority)
priority = PR_PRIORITY_FIRST;
else if ((PRIntn)PR_PRIORITY_LAST < (PRIntn)priority)
priority = PR_PRIORITY_LAST;
rv = _PT_PTHREAD_ATTR_INIT(&tattr);
PR_ASSERT(0 == rv);
if (EPERM != pt_schedpriv)
{
#if !defined(_PR_DCETHREADS) && defined(_POSIX_THREAD_PRIORITY_SCHEDULING)
struct sched_param schedule;
#endif
#if defined(_POSIX_THREAD_PRIORITY_SCHEDULING)
rv = pthread_attr_setinheritsched(&tattr, PTHREAD_EXPLICIT_SCHED);
PR_ASSERT(0 == rv);
#endif
/* Use the default scheduling policy */
#if defined(_PR_DCETHREADS)
rv = pthread_attr_setprio(&tattr, pt_PriorityMap(priority));
PR_ASSERT(0 == rv);
#elif defined(_POSIX_THREAD_PRIORITY_SCHEDULING)
rv = pthread_attr_getschedparam(&tattr, &schedule);
PR_ASSERT(0 == rv);
schedule.sched_priority = pt_PriorityMap(priority);
rv = pthread_attr_setschedparam(&tattr, &schedule);
PR_ASSERT(0 == rv);
#ifdef NTO
rv = pthread_attr_setschedpolicy(&tattr, SCHED_RR); /* Round Robin */
PR_ASSERT(0 == rv);
#endif
#endif /* !defined(_PR_DCETHREADS) */
}
/*
* DCE threads can't set detach state before creating the thread.
* AIX can't set detach late. Why can't we all just get along?
*/
#if !defined(_PR_DCETHREADS)
rv = pthread_attr_setdetachstate(&tattr,
((PR_JOINABLE_THREAD == state) ?
PTHREAD_CREATE_JOINABLE : PTHREAD_CREATE_DETACHED));
PR_ASSERT(0 == rv);
#endif /* !defined(_PR_DCETHREADS) */
/*
* If stackSize is 0, we use the default pthread stack size.
*/
if (stackSize)
{
#ifdef _MD_MINIMUM_STACK_SIZE
if (stackSize < _MD_MINIMUM_STACK_SIZE)
stackSize = _MD_MINIMUM_STACK_SIZE;
#endif
rv = pthread_attr_setstacksize(&tattr, stackSize);
PR_ASSERT(0 == rv);
}
thred = PR_NEWZAP(PRThread);
if (NULL == thred)
{
PR_SetError(PR_OUT_OF_MEMORY_ERROR, errno);
goto done;
}
else
{
pthread_t id;
thred->arg = arg;
thred->startFunc = start;
thred->priority = priority;
if (PR_UNJOINABLE_THREAD == state)
thred->state |= PT_THREAD_DETACHED;
if (PR_LOCAL_THREAD == scope)
scope = PR_GLOBAL_THREAD;
if (PR_GLOBAL_BOUND_THREAD == scope) {
#if defined(_POSIX_THREAD_PRIORITY_SCHEDULING)
rv = pthread_attr_setscope(&tattr, PTHREAD_SCOPE_SYSTEM);
if (rv) {
/*
* system scope not supported
*/
scope = PR_GLOBAL_THREAD;
/*
* reset scope
*/
rv = pthread_attr_setscope(&tattr, PTHREAD_SCOPE_PROCESS);
PR_ASSERT(0 == rv);
}
#endif
}
if (PR_GLOBAL_THREAD == scope)
thred->state |= PT_THREAD_GLOBAL;
else if (PR_GLOBAL_BOUND_THREAD == scope)
thred->state |= (PT_THREAD_GLOBAL | PT_THREAD_BOUND);
else /* force it global */
thred->state |= PT_THREAD_GLOBAL;
if (PR_SYSTEM_THREAD == type)
thred->state |= PT_THREAD_SYSTEM;
thred->suspend =(isGCAble) ? PT_THREAD_SETGCABLE : 0;
thred->stack = PR_NEWZAP(PRThreadStack);
if (thred->stack == NULL) {
PRIntn oserr = errno;
PR_Free(thred); /* all that work ... poof! */
PR_SetError(PR_OUT_OF_MEMORY_ERROR, oserr);
thred = NULL; /* and for what? */
goto done;
}
thred->stack->stackSize = stackSize;
thred->stack->thr = thred;
#ifdef PT_NO_SIGTIMEDWAIT
pthread_mutex_init(&thred->suspendResumeMutex,NULL);
pthread_cond_init(&thred->suspendResumeCV,NULL);
#endif
/* make the thread counted to the rest of the runtime */
PR_Lock(pt_book.ml);
if (PR_SYSTEM_THREAD == type)
pt_book.system += 1;
else pt_book.user += 1;
PR_Unlock(pt_book.ml);
/*
* We pass a pointer to a local copy (instead of thred->id)
* to pthread_create() because who knows what wacky things
* pthread_create() may be doing to its argument.
*/
rv = _PT_PTHREAD_CREATE(&id, tattr, _pt_root, thred);
#if !defined(_PR_DCETHREADS)
if (EPERM == rv)
{
#if defined(IRIX)
if (PR_GLOBAL_BOUND_THREAD == scope) {
/*
* SCOPE_SYSTEM requires appropriate privilege
* reset to process scope and try again
*/
rv = pthread_attr_setscope(&tattr, PTHREAD_SCOPE_PROCESS);
PR_ASSERT(0 == rv);
thred->state &= ~PT_THREAD_BOUND;
}
#else
/* Remember that we don't have thread scheduling privilege. */
pt_schedpriv = EPERM;
PR_LOG(_pr_thread_lm, PR_LOG_MIN,
("_PR_CreateThread: no thread scheduling privilege"));
/* Try creating the thread again without setting priority. */
#if defined(_POSIX_THREAD_PRIORITY_SCHEDULING)
rv = pthread_attr_setinheritsched(&tattr, PTHREAD_INHERIT_SCHED);
PR_ASSERT(0 == rv);
#endif
#endif /* IRIX */
rv = _PT_PTHREAD_CREATE(&id, tattr, _pt_root, thred);
}
#endif
if (0 != rv)
{
#if defined(_PR_DCETHREADS)
PRIntn oserr = errno;
#else
PRIntn oserr = rv;
#endif
PR_Lock(pt_book.ml);
if (thred->state & PT_THREAD_SYSTEM)
pt_book.system -= 1;
else if (--pt_book.user == pt_book.this_many)
PR_NotifyAllCondVar(pt_book.cv);
PR_Unlock(pt_book.ml);
PR_Free(thred->stack);
PR_Free(thred); /* all that work ... poof! */
PR_SetError(PR_INSUFFICIENT_RESOURCES_ERROR, oserr);
thred = NULL; /* and for what? */
goto done;
}
/*
* Both the parent thread and this new thread set thred->id.
* The parent thread must ensure that thred->id is set before
* PR_CreateThread() returns. (See comments in _pt_root().)
*/
thred->id = id;
/*
* If the new thread is detached, tell it that PR_CreateThread()
* has set thred->id so it's ok to delete thred.
*/
if (PR_UNJOINABLE_THREAD == state)
{
PR_Lock(pt_book.ml);
thred->okToDelete = PR_TRUE;
PR_NotifyAllCondVar(pt_book.cv);
PR_Unlock(pt_book.ml);
}
}
done:
rv = _PT_PTHREAD_ATTR_DESTROY(&tattr);
PR_ASSERT(0 == rv);
return thred;
} /* _PR_CreateThread */
PR_IMPLEMENT(PRThread*) PR_CreateThread(
PRThreadType type, void (*start)(void *arg), void *arg,
PRThreadPriority priority, PRThreadScope scope,
PRThreadState state, PRUint32 stackSize)
{
return _PR_CreateThread(
type, start, arg, priority, scope, state, stackSize, PR_FALSE);
} /* PR_CreateThread */
PR_IMPLEMENT(PRThread*) PR_CreateThreadGCAble(
PRThreadType type, void (*start)(void *arg), void *arg,
PRThreadPriority priority, PRThreadScope scope,
PRThreadState state, PRUint32 stackSize)
{
return _PR_CreateThread(
type, start, arg, priority, scope, state, stackSize, PR_TRUE);
} /* PR_CreateThreadGCAble */
PR_IMPLEMENT(void*) GetExecutionEnvironment(PRThread *thred)
{
return thred->environment;
} /* GetExecutionEnvironment */
PR_IMPLEMENT(void) SetExecutionEnvironment(PRThread *thred, void *env)
{
thred->environment = env;
} /* SetExecutionEnvironment */
PR_IMPLEMENT(PRThread*) PR_AttachThread(
PRThreadType type, PRThreadPriority priority, PRThreadStack *stack)
{
return PR_GetCurrentThread();
} /* PR_AttachThread */
PR_IMPLEMENT(PRStatus) PR_JoinThread(PRThread *thred)
{
int rv = -1;
void *result = NULL;
PR_ASSERT(thred != NULL);
if ((0xafafafaf == thred->state)
|| (PT_THREAD_DETACHED == (PT_THREAD_DETACHED & thred->state))
|| (PT_THREAD_FOREIGN == (PT_THREAD_FOREIGN & thred->state)))
{
/*
* This might be a bad address, but if it isn't, the state should
* either be an unjoinable thread or it's already had the object
* deleted. However, the client that called join on a detached
* thread deserves all the rath I can muster....
*/
PR_SetError(PR_INVALID_ARGUMENT_ERROR, 0);
PR_LogPrint(
"PR_JoinThread: %p not joinable | already smashed\n", thred);
}
else
{
pthread_t id = thred->id;
rv = pthread_join(id, &result);
PR_ASSERT(rv == 0 && result == NULL);
if (0 == rv)
{
#ifdef _PR_DCETHREADS
rv = pthread_detach(&id);
PR_ASSERT(0 == rv);
#endif
_pt_thread_death(thred);
}
else
{
PRErrorCode prerror;
switch (rv)
{
case EINVAL: /* not a joinable thread */
case ESRCH: /* no thread with given ID */
prerror = PR_INVALID_ARGUMENT_ERROR;
break;
case EDEADLK: /* a thread joining with itself */
prerror = PR_DEADLOCK_ERROR;
break;
default:
prerror = PR_UNKNOWN_ERROR;
break;
}
PR_SetError(prerror, rv);
}
}
return (0 == rv) ? PR_SUCCESS : PR_FAILURE;
} /* PR_JoinThread */
PR_IMPLEMENT(void) PR_DetachThread(void) { } /* PR_DetachThread */
PR_IMPLEMENT(PRThread*) PR_GetCurrentThread(void)
{
void *thred;
if (!_pr_initialized) _PR_ImplicitInitialization();
_PT_PTHREAD_GETSPECIFIC(pt_book.key, thred);
if (NULL == thred) thred = pt_AttachThread();
PR_ASSERT(NULL != thred);
return (PRThread*)thred;
} /* PR_GetCurrentThread */
PR_IMPLEMENT(PRThreadScope) PR_GetThreadScope(const PRThread *thred)
{
return (thred->state & PT_THREAD_BOUND) ?
PR_GLOBAL_BOUND_THREAD : PR_GLOBAL_THREAD;
} /* PR_GetThreadScope() */
PR_IMPLEMENT(PRThreadType) PR_GetThreadType(const PRThread *thred)
{
return (thred->state & PT_THREAD_SYSTEM) ?
PR_SYSTEM_THREAD : PR_USER_THREAD;
}
PR_IMPLEMENT(PRThreadState) PR_GetThreadState(const PRThread *thred)
{
return (thred->state & PT_THREAD_DETACHED) ?
PR_UNJOINABLE_THREAD : PR_JOINABLE_THREAD;
} /* PR_GetThreadState */
PR_IMPLEMENT(PRThreadPriority) PR_GetThreadPriority(const PRThread *thred)
{
PR_ASSERT(thred != NULL);
return thred->priority;
} /* PR_GetThreadPriority */
PR_IMPLEMENT(void) PR_SetThreadPriority(PRThread *thred, PRThreadPriority newPri)
{
PRIntn rv = -1;
PR_ASSERT(NULL != thred);
if ((PRIntn)PR_PRIORITY_FIRST > (PRIntn)newPri)
newPri = PR_PRIORITY_FIRST;
else if ((PRIntn)PR_PRIORITY_LAST < (PRIntn)newPri)
newPri = PR_PRIORITY_LAST;
#if defined(_PR_DCETHREADS)
rv = pthread_setprio(thred->id, pt_PriorityMap(newPri));
/* pthread_setprio returns the old priority */
#elif defined(_POSIX_THREAD_PRIORITY_SCHEDULING)
if (EPERM != pt_schedpriv)
{
int policy;
struct sched_param schedule;
rv = pthread_getschedparam(thred->id, &policy, &schedule);
if(0 == rv) {
schedule.sched_priority = pt_PriorityMap(newPri);
rv = pthread_setschedparam(thred->id, policy, &schedule);
if (EPERM == rv)
{
pt_schedpriv = EPERM;
PR_LOG(_pr_thread_lm, PR_LOG_MIN,
("PR_SetThreadPriority: no thread scheduling privilege"));
}
}
if (rv != 0)
rv = -1;
}
#endif
thred->priority = newPri;
} /* PR_SetThreadPriority */
PR_IMPLEMENT(PRStatus) PR_Interrupt(PRThread *thred)
{
/*
** If the target thread indicates that it's waiting,
** find the condition and broadcast to it. Broadcast
** since we don't know which thread (if there are more
** than one). This sounds risky, but clients must
** test their invariants when resumed from a wait and
** I don't expect very many threads to be waiting on
** a single condition and I don't expect interrupt to
** be used very often.
**
** I don't know why I thought this would work. Must have
** been one of those weaker momements after I'd been
** smelling the vapors.
**
** Even with the followng changes it is possible that
** the pointer to the condition variable is pointing
** at a bogus value. Will the unerlying code detect
** that?
*/
PRCondVar *cv;
PR_ASSERT(NULL != thred);
if (NULL == thred) return PR_FAILURE;
thred->state |= PT_THREAD_ABORTED;
cv = thred->waiting;
if ((NULL != cv) && !thred->interrupt_blocked)
{
PRIntn rv;
(void)PR_AtomicIncrement(&cv->notify_pending);
rv = pthread_cond_broadcast(&cv->cv);
PR_ASSERT(0 == rv);
if (0 > PR_AtomicDecrement(&cv->notify_pending))
PR_DestroyCondVar(cv);
}
return PR_SUCCESS;
} /* PR_Interrupt */
PR_IMPLEMENT(void) PR_ClearInterrupt(void)
{
PRThread *me = PR_GetCurrentThread();
me->state &= ~PT_THREAD_ABORTED;
} /* PR_ClearInterrupt */
PR_IMPLEMENT(void) PR_BlockInterrupt(void)
{
PRThread *me = PR_GetCurrentThread();
_PT_THREAD_BLOCK_INTERRUPT(me);
} /* PR_BlockInterrupt */
PR_IMPLEMENT(void) PR_UnblockInterrupt(void)
{
PRThread *me = PR_GetCurrentThread();
_PT_THREAD_UNBLOCK_INTERRUPT(me);
} /* PR_UnblockInterrupt */
PR_IMPLEMENT(PRStatus) PR_Yield(void)
{
static PRBool warning = PR_TRUE;
if (warning) warning = _PR_Obsolete(
"PR_Yield()", "PR_Sleep(PR_INTERVAL_NO_WAIT)");
return PR_Sleep(PR_INTERVAL_NO_WAIT);
}
PR_IMPLEMENT(PRStatus) PR_Sleep(PRIntervalTime ticks)
{
PRStatus rv = PR_SUCCESS;
if (!_pr_initialized) _PR_ImplicitInitialization();
if (PR_INTERVAL_NO_WAIT == ticks)
{
_PT_PTHREAD_YIELD();
}
else
{
PRCondVar *cv;
PRIntervalTime timein;
timein = PR_IntervalNow();
cv = PR_NewCondVar(_pr_sleeplock);
PR_ASSERT(cv != NULL);
PR_Lock(_pr_sleeplock);
do
{
PRIntervalTime now = PR_IntervalNow();
PRIntervalTime delta = now - timein;
if (delta > ticks) break;
rv = PR_WaitCondVar(cv, ticks - delta);
} while (PR_SUCCESS == rv);
PR_Unlock(_pr_sleeplock);
PR_DestroyCondVar(cv);
}
return rv;
} /* PR_Sleep */
static void _pt_thread_death(void *arg)
{
PRThread *thred = (PRThread*)arg;
if (thred->state & (PT_THREAD_FOREIGN|PT_THREAD_PRIMORD))
{
PR_Lock(pt_book.ml);
if (NULL == thred->prev)
pt_book.first = thred->next;
else
thred->prev->next = thred->next;
if (NULL == thred->next)
pt_book.last = thred->prev;
else
thred->next->prev = thred->prev;
PR_Unlock(pt_book.ml);
}
_PR_DestroyThreadPrivate(thred);
PR_Free(thred->privateData);
if (NULL != thred->errorString)
PR_Free(thred->errorString);
PR_Free(thred->stack);
if (NULL != thred->syspoll_list)
PR_Free(thred->syspoll_list);
#if defined(_PR_POLL_WITH_SELECT)
if (NULL != thred->selectfd_list)
PR_Free(thred->selectfd_list);
#endif
#if defined(DEBUG)
memset(thred, 0xaf, sizeof(PRThread));
#endif /* defined(DEBUG) */
PR_Free(thred);
} /* _pt_thread_death */
void _PR_InitThreads(
PRThreadType type, PRThreadPriority priority, PRUintn maxPTDs)
{
int rv;
PRThread *thred;
#ifdef _PR_NEED_PTHREAD_INIT
/*
* On BSD/OS (3.1 and 4.0), the pthread subsystem is lazily
* initialized, but pthread_self() fails to initialize
* pthreads and hence returns a null thread ID if invoked
* by the primordial thread before any other pthread call.
* So we explicitly initialize pthreads here.
*/
pthread_init();
#endif
#if defined(_PR_DCETHREADS) || defined(_POSIX_THREAD_PRIORITY_SCHEDULING)
#if defined(FREEBSD)
{
pthread_attr_t attr;
int policy;
/* get the min and max priorities of the default policy */
pthread_attr_init(&attr);
pthread_attr_setinheritsched(&attr, PTHREAD_EXPLICIT_SCHED);
pthread_attr_getschedpolicy(&attr, &policy);
pt_book.minPrio = sched_get_priority_min(policy);
PR_ASSERT(-1 != pt_book.minPrio);
pt_book.maxPrio = sched_get_priority_max(policy);
PR_ASSERT(-1 != pt_book.maxPrio);
pthread_attr_destroy(&attr);
}
#else
/*
** These might be function evaluations
*/
pt_book.minPrio = PT_PRIO_MIN;
pt_book.maxPrio = PT_PRIO_MAX;
#endif
#endif
PR_ASSERT(NULL == pt_book.ml);
pt_book.ml = PR_NewLock();
PR_ASSERT(NULL != pt_book.ml);
pt_book.cv = PR_NewCondVar(pt_book.ml);
PR_ASSERT(NULL != pt_book.cv);
thred = PR_NEWZAP(PRThread);
PR_ASSERT(NULL != thred);
thred->arg = NULL;
thred->startFunc = NULL;
thred->priority = priority;
thred->id = pthread_self();
thred->state = (PT_THREAD_DETACHED | PT_THREAD_PRIMORD);
if (PR_SYSTEM_THREAD == type)
{
thred->state |= PT_THREAD_SYSTEM;
pt_book.system += 1;
pt_book.this_many = 0;
}
else
{
pt_book.user += 1;
pt_book.this_many = 1;
}
thred->next = thred->prev = NULL;
pt_book.first = pt_book.last = thred;
thred->stack = PR_NEWZAP(PRThreadStack);
PR_ASSERT(thred->stack != NULL);
thred->stack->stackSize = 0;
thred->stack->thr = thred;
_PR_InitializeStack(thred->stack);
/*
* Create a key for our use to store a backpointer in the pthread
* to our PRThread object. This object gets deleted when the thread
* returns from its root in the case of a detached thread. Other
* threads delete the objects in Join.
*
* NB: The destructor logic seems to have a bug so it isn't used.
* NBB: Oh really? I'm going to give it a spin - AOF 19 June 1998.
* More info - the problem is that pthreads calls the destructor
* eagerly as the thread returns from its root, rather than lazily
* after the thread is joined. Therefore, threads that are joining
* and holding PRThread references are actually holding pointers to
* nothing.
*/
rv = _PT_PTHREAD_KEY_CREATE(&pt_book.key, _pt_thread_death);
PR_ASSERT(0 == rv);
rv = pthread_setspecific(pt_book.key, thred);
PR_ASSERT(0 == rv);
PR_SetThreadPriority(thred, priority);
} /* _PR_InitThreads */
PR_IMPLEMENT(PRStatus) PR_Cleanup(void)
{
PRThread *me = PR_GetCurrentThread();
int rv;
PR_LOG(_pr_thread_lm, PR_LOG_MIN, ("PR_Cleanup: shutting down NSPR"));
PR_ASSERT(me->state & PT_THREAD_PRIMORD);
if (me->state & PT_THREAD_PRIMORD)
{
PR_Lock(pt_book.ml);
while (pt_book.user > pt_book.this_many)
PR_WaitCondVar(pt_book.cv, PR_INTERVAL_NO_TIMEOUT);
PR_Unlock(pt_book.ml);
_PR_CleanupMW();
_PR_CleanupCallOnce();
_PR_LogCleanup();
_PR_CleanupNet();
/* Close all the fd's before calling _PR_CleanupIO */
_PR_CleanupIO();
_pt_thread_death(me);
rv = pthread_setspecific(pt_book.key, NULL);
PR_ASSERT(0 == rv);
/*
* I am not sure if it's safe to delete the cv and lock here,
* since there may still be "system" threads around. If this
* call isn't immediately prior to exiting, then there's a
* problem.
*/
if (0 == pt_book.system)
{
PR_DestroyCondVar(pt_book.cv); pt_book.cv = NULL;
PR_DestroyLock(pt_book.ml); pt_book.ml = NULL;
}
PR_DestroyLock(_pr_sleeplock);
_pr_sleeplock = NULL;
_PR_CleanupLayerCache();
#ifdef _PR_ZONE_ALLOCATOR
_PR_DestroyZones();
#endif
_pr_initialized = PR_FALSE;
return PR_SUCCESS;
}
return PR_FAILURE;
} /* PR_Cleanup */
PR_IMPLEMENT(void) PR_ProcessExit(PRIntn status)
{
_exit(status);
}
PR_IMPLEMENT(PRUint32) PR_GetThreadID(PRThread *thred)
{
#if defined(_PR_DCETHREADS)
return (PRUint32)&thred->id; /* this is really a sham! */
#else
return (PRUint32)thred->id; /* and I don't know what they will do with it */
#endif
}
/*
* $$$
* The following two thread-to-processor affinity functions are not
* yet implemented for pthreads. By the way, these functions should return
* PRStatus rather than PRInt32 to indicate the success/failure status.
* $$$
*/
PR_IMPLEMENT(PRInt32) PR_GetThreadAffinityMask(PRThread *thread, PRUint32 *mask)
{
return 0; /* not implemented */
}
PR_IMPLEMENT(PRInt32) PR_SetThreadAffinityMask(PRThread *thread, PRUint32 mask )
{
return 0; /* not implemented */
}
PR_IMPLEMENT(void)
PR_SetThreadDumpProc(PRThread* thread, PRThreadDumpProc dump, void *arg)
{
thread->dump = dump;
thread->dumpArg = arg;
}
/*
* Garbage collection support follows.
*/
#if defined(_PR_DCETHREADS)
/*
* statics for Garbage Collection support. We don't need to protect these
* signal masks since the garbage collector itself is protected by a lock
* and multiple threads will not be garbage collecting at the same time.
*/
static sigset_t javagc_vtalarm_sigmask;
static sigset_t javagc_intsoff_sigmask;
#else /* defined(_PR_DCETHREADS) */
/* a bogus signal mask for forcing a timed wait */
/* Not so bogus in AIX as we really do a sigwait */
static sigset_t sigwait_set;
static struct timespec onemillisec = {0, 1000000L};
#ifndef PT_NO_SIGTIMEDWAIT
static struct timespec hundredmillisec = {0, 100000000L};
#endif
static void suspend_signal_handler(PRIntn sig);
#ifdef PT_NO_SIGTIMEDWAIT
static void null_signal_handler(PRIntn sig);
#endif
#endif /* defined(_PR_DCETHREADS) */
/*
* Linux pthreads use SIGUSR1 and SIGUSR2 internally, which
* conflict with the use of these two signals in our GC support.
* So we don't know how to support GC on Linux pthreads.
*/
static void init_pthread_gc_support(void)
{
PRIntn rv;
#if defined(_PR_DCETHREADS)
rv = sigemptyset(&javagc_vtalarm_sigmask);
PR_ASSERT(0 == rv);
rv = sigaddset(&javagc_vtalarm_sigmask, SIGVTALRM);
PR_ASSERT(0 == rv);
#else /* defined(_PR_DCETHREADS) */
{
struct sigaction sigact_usr2;
sigact_usr2.sa_handler = suspend_signal_handler;
sigact_usr2.sa_flags = SA_RESTART;
sigemptyset (&sigact_usr2.sa_mask);
rv = sigaction (SIGUSR2, &sigact_usr2, NULL);
PR_ASSERT(0 == rv);
sigemptyset (&sigwait_set);
#if defined(PT_NO_SIGTIMEDWAIT)
sigaddset (&sigwait_set, SIGUSR1);
#else
sigaddset (&sigwait_set, SIGUSR2);
#endif /* defined(PT_NO_SIGTIMEDWAIT) */
}
#if defined(PT_NO_SIGTIMEDWAIT)
{
struct sigaction sigact_null;
sigact_null.sa_handler = null_signal_handler;
sigact_null.sa_flags = SA_RESTART;
sigemptyset (&sigact_null.sa_mask);
rv = sigaction (SIGUSR1, &sigact_null, NULL);
PR_ASSERT(0 ==rv);
}
#endif /* defined(PT_NO_SIGTIMEDWAIT) */
#endif /* defined(_PR_DCETHREADS) */
}
PR_IMPLEMENT(void) PR_SetThreadGCAble(void)
{
PR_Lock(pt_book.ml);
PR_GetCurrentThread()->state |= PT_THREAD_GCABLE;
PR_Unlock(pt_book.ml);
}
PR_IMPLEMENT(void) PR_ClearThreadGCAble(void)
{
PR_Lock(pt_book.ml);
PR_GetCurrentThread()->state &= (~PT_THREAD_GCABLE);
PR_Unlock(pt_book.ml);
}
#if defined(DEBUG)
static PRBool suspendAllOn = PR_FALSE;
#endif
static PRBool suspendAllSuspended = PR_FALSE;
PR_IMPLEMENT(PRStatus) PR_EnumerateThreads(PREnumerator func, void *arg)
{
PRIntn count = 0;
PRStatus rv = PR_SUCCESS;
PRThread* thred = pt_book.first;
PRThread *me = PR_GetCurrentThread();
PR_LOG(_pr_gc_lm, PR_LOG_ALWAYS, ("Begin PR_EnumerateThreads\n"));
/*
* $$$
* Need to suspend all threads other than me before doing this.
* This is really a gross and disgusting thing to do. The only
* good thing is that since all other threads are suspended, holding
* the lock during a callback seems like child's play.
* $$$
*/
PR_ASSERT(suspendAllOn);
while (thred != NULL)
{
/* Steve Morse, 4-23-97: Note that we can't walk a queue by taking
* qp->next after applying the function "func". In particular, "func"
* might remove the thread from the queue and put it into another one in
* which case qp->next no longer points to the next entry in the original
* queue.
*
* To get around this problem, we save qp->next in qp_next before applying
* "func" and use that saved value as the next value after applying "func".
*/
PRThread* next = thred->next;
if (_PT_IS_GCABLE_THREAD(thred))
{
#if !defined(_PR_DCETHREADS)
PR_ASSERT((thred == me) || (thred->suspend & PT_THREAD_SUSPENDED));
#endif
PR_LOG(_pr_gc_lm, PR_LOG_ALWAYS,
("In PR_EnumerateThreads callback thread %p thid = %X\n",
thred, thred->id));
rv = func(thred, count++, arg);
if (rv != PR_SUCCESS)
return rv;
}
thred = next;
}
PR_LOG(_pr_gc_lm, PR_LOG_ALWAYS,
("End PR_EnumerateThreads count = %d \n", count));
return rv;
} /* PR_EnumerateThreads */
/*
* PR_SuspendAll and PR_ResumeAll are called during garbage collection. The strategy
* we use is to send a SIGUSR2 signal to every gc able thread that we intend to suspend.
* The signal handler will record the stack pointer and will block until resumed by
* the resume call. Since the signal handler is the last routine called for the
* suspended thread, the stack pointer will also serve as a place where all the
* registers have been saved on the stack for the previously executing routines.
*
* Through global variables, we also make sure that PR_Suspend and PR_Resume does not
* proceed until the thread is suspended or resumed.
*/
#if !defined(_PR_DCETHREADS)
/*
* In the signal handler, we can not use condition variable notify or wait.
* This does not work consistently across all pthread platforms. We also can not
* use locking since that does not seem to work reliably across platforms.
* Only thing we can do is yielding while testing for a global condition
* to change. This does work on pthread supported platforms. We may have
* to play with priortities if there are any problems detected.
*/
/*
* In AIX, you cannot use ANY pthread calls in the signal handler except perhaps
* pthread_yield. But that is horribly inefficient. Hence we use only sigwait, no
* sigtimedwait is available. We need to use another user signal, SIGUSR1. Actually
* SIGUSR1 is also used by exec in Java. So our usage here breaks the exec in Java,
* for AIX. You cannot use pthread_cond_wait or pthread_delay_np in the signal
* handler as all synchronization mechanisms just break down.
*/
#if defined(PT_NO_SIGTIMEDWAIT)
static void null_signal_handler(PRIntn sig)
{
return;
}
#endif
static void suspend_signal_handler(PRIntn sig)
{
PRThread *me = PR_GetCurrentThread();
PR_ASSERT(me != NULL);
PR_ASSERT(_PT_IS_GCABLE_THREAD(me));
PR_ASSERT((me->suspend & PT_THREAD_SUSPENDED) == 0);
PR_LOG(_pr_gc_lm, PR_LOG_ALWAYS,
("Begin suspend_signal_handler thred %p thread id = %X\n",
me, me->id));
/*
* save stack pointer
*/
me->sp = &me;
/*
At this point, the thread's stack pointer has been saved,
And it is going to enter a wait loop until it is resumed.
So it is _really_ suspended
*/
me->suspend |= PT_THREAD_SUSPENDED;
/*
* now, block current thread
*/
#if defined(PT_NO_SIGTIMEDWAIT)
pthread_cond_signal(&me->suspendResumeCV);
while (me->suspend & PT_THREAD_SUSPENDED)
{
#if !defined(FREEBSD) && !defined(NETBSD) && !defined(OPENBSD) \
&& !defined(BSDI) && !defined(VMS) && !defined(UNIXWARE) \
&& !defined(DARWIN) && !defined(RISCOS) /*XXX*/
PRIntn rv;
sigwait(&sigwait_set, &rv);
#endif
}
me->suspend |= PT_THREAD_RESUMED;
pthread_cond_signal(&me->suspendResumeCV);
#else /* defined(PT_NO_SIGTIMEDWAIT) */
while (me->suspend & PT_THREAD_SUSPENDED)
{
PRIntn rv = sigtimedwait(&sigwait_set, NULL, &hundredmillisec);
PR_ASSERT(-1 == rv);
}
me->suspend |= PT_THREAD_RESUMED;
#endif
/*
* At this point, thread has been resumed, so set a global condition.
* The ResumeAll needs to know that this has really been resumed.
* So the signal handler sets a flag which PR_ResumeAll will reset.
* The PR_ResumeAll must reset this flag ...
*/
PR_LOG(_pr_gc_lm, PR_LOG_ALWAYS,
("End suspend_signal_handler thred = %p tid = %X\n", me, me->id));
} /* suspend_signal_handler */
static void pt_SuspendSet(PRThread *thred)
{
PRIntn rv;
PR_LOG(_pr_gc_lm, PR_LOG_ALWAYS,
("pt_SuspendSet thred %p thread id = %X\n", thred, thred->id));
/*
* Check the thread state and signal the thread to suspend
*/
PR_ASSERT((thred->suspend & PT_THREAD_SUSPENDED) == 0);
PR_LOG(_pr_gc_lm, PR_LOG_ALWAYS,
("doing pthread_kill in pt_SuspendSet thred %p tid = %X\n",
thred, thred->id));
#if defined(VMS)
rv = thread_suspend(thred);
#else
rv = pthread_kill (thred->id, SIGUSR2);
#endif
PR_ASSERT(0 == rv);
}
static void pt_SuspendTest(PRThread *thred)
{
PR_LOG(_pr_gc_lm, PR_LOG_ALWAYS,
("Begin pt_SuspendTest thred %p thread id = %X\n", thred, thred->id));
/*
* Wait for the thread to be really suspended. This happens when the
* suspend signal handler stores the stack pointer and sets the state
* to suspended.
*/
#if defined(PT_NO_SIGTIMEDWAIT)
pthread_mutex_lock(&thred->suspendResumeMutex);
while ((thred->suspend & PT_THREAD_SUSPENDED) == 0)
{
pthread_cond_timedwait(
&thred->suspendResumeCV, &thred->suspendResumeMutex, &onemillisec);
}
pthread_mutex_unlock(&thred->suspendResumeMutex);
#else
while ((thred->suspend & PT_THREAD_SUSPENDED) == 0)
{
PRIntn rv = sigtimedwait(&sigwait_set, NULL, &onemillisec);
PR_ASSERT(-1 == rv);
}
#endif
PR_LOG(_pr_gc_lm, PR_LOG_ALWAYS,
("End pt_SuspendTest thred %p tid %X\n", thred, thred->id));
} /* pt_SuspendTest */
static void pt_ResumeSet(PRThread *thred)
{
PR_LOG(_pr_gc_lm, PR_LOG_ALWAYS,
("pt_ResumeSet thred %p thread id = %X\n", thred, thred->id));
/*
* Clear the global state and set the thread state so that it will
* continue past yield loop in the suspend signal handler
*/
PR_ASSERT(thred->suspend & PT_THREAD_SUSPENDED);
thred->suspend &= ~PT_THREAD_SUSPENDED;
#if defined(PT_NO_SIGTIMEDWAIT)
#if defined(VMS)
thread_resume(thred);
#else
pthread_kill(thred->id, SIGUSR1);
#endif
#endif
} /* pt_ResumeSet */
static void pt_ResumeTest(PRThread *thred)
{
PR_LOG(_pr_gc_lm, PR_LOG_ALWAYS,
("Begin pt_ResumeTest thred %p thread id = %X\n", thred, thred->id));
/*
* Wait for the threads resume state to change
* to indicate it is really resumed
*/
#if defined(PT_NO_SIGTIMEDWAIT)
pthread_mutex_lock(&thred->suspendResumeMutex);
while ((thred->suspend & PT_THREAD_RESUMED) == 0)
{
pthread_cond_timedwait(
&thred->suspendResumeCV, &thred->suspendResumeMutex, &onemillisec);
}
pthread_mutex_unlock(&thred->suspendResumeMutex);
#else
while ((thred->suspend & PT_THREAD_RESUMED) == 0) {
PRIntn rv = sigtimedwait(&sigwait_set, NULL, &onemillisec);
PR_ASSERT(-1 == rv);
}
#endif
thred->suspend &= ~PT_THREAD_RESUMED;
PR_LOG(_pr_gc_lm, PR_LOG_ALWAYS, (
"End pt_ResumeTest thred %p tid %X\n", thred, thred->id));
} /* pt_ResumeTest */
static pthread_once_t pt_gc_support_control = PTHREAD_ONCE_INIT;
PR_IMPLEMENT(void) PR_SuspendAll(void)
{
#ifdef DEBUG
PRIntervalTime stime, etime;
#endif
PRThread* thred = pt_book.first;
PRThread *me = PR_GetCurrentThread();
int rv;
rv = pthread_once(&pt_gc_support_control, init_pthread_gc_support);
PR_ASSERT(0 == rv);
PR_LOG(_pr_gc_lm, PR_LOG_ALWAYS, ("Begin PR_SuspendAll\n"));
/*
* Stop all threads which are marked GC able.
*/
PR_Lock(pt_book.ml);
#ifdef DEBUG
suspendAllOn = PR_TRUE;
stime = PR_IntervalNow();
#endif
while (thred != NULL)
{
if ((thred != me) && _PT_IS_GCABLE_THREAD(thred))
pt_SuspendSet(thred);
thred = thred->next;
}
/* Wait till they are really suspended */
thred = pt_book.first;
while (thred != NULL)
{
if ((thred != me) && _PT_IS_GCABLE_THREAD(thred))
pt_SuspendTest(thred);
thred = thred->next;
}
suspendAllSuspended = PR_TRUE;
#ifdef DEBUG
etime = PR_IntervalNow();
PR_LOG(_pr_gc_lm, PR_LOG_ALWAYS,\
("End PR_SuspendAll (time %dms)\n",
PR_IntervalToMilliseconds(etime - stime)));
#endif
} /* PR_SuspendAll */
PR_IMPLEMENT(void) PR_ResumeAll(void)
{
#ifdef DEBUG
PRIntervalTime stime, etime;
#endif
PRThread* thred = pt_book.first;
PRThread *me = PR_GetCurrentThread();
PR_LOG(_pr_gc_lm, PR_LOG_ALWAYS, ("Begin PR_ResumeAll\n"));
/*
* Resume all previously suspended GC able threads.
*/
suspendAllSuspended = PR_FALSE;
#ifdef DEBUG
stime = PR_IntervalNow();
#endif
while (thred != NULL)
{
if ((thred != me) && _PT_IS_GCABLE_THREAD(thred))
pt_ResumeSet(thred);
thred = thred->next;
}
thred = pt_book.first;
while (thred != NULL)
{
if ((thred != me) && _PT_IS_GCABLE_THREAD(thred))
pt_ResumeTest(thred);
thred = thred->next;
}
PR_Unlock(pt_book.ml);
#ifdef DEBUG
suspendAllOn = PR_FALSE;
etime = PR_IntervalNow();
PR_LOG(_pr_gc_lm, PR_LOG_ALWAYS,
("End PR_ResumeAll (time %dms)\n",
PR_IntervalToMilliseconds(etime - stime)));
#endif
} /* PR_ResumeAll */
/* Return the stack pointer for the given thread- used by the GC */
PR_IMPLEMENT(void *)PR_GetSP(PRThread *thred)
{
PR_LOG(_pr_gc_lm, PR_LOG_ALWAYS,
("in PR_GetSP thred %p thid = %X, sp = %p\n",
thred, thred->id, thred->sp));
return thred->sp;
} /* PR_GetSP */
#else /* !defined(_PR_DCETHREADS) */
static pthread_once_t pt_gc_support_control = pthread_once_init;
/*
* For DCE threads, there is no pthread_kill or a way of suspending or resuming a
* particular thread. We will just disable the preemption (virtual timer alarm) and
* let the executing thread finish the garbage collection. This stops all other threads
* (GC able or not) and is very inefficient but there is no other choice.
*/
PR_IMPLEMENT(void) PR_SuspendAll()
{
PRIntn rv;
rv = pthread_once(&pt_gc_support_control, init_pthread_gc_support);
PR_ASSERT(0 == rv); /* returns -1 on failure */
#ifdef DEBUG
suspendAllOn = PR_TRUE;
#endif
PR_LOG(_pr_gc_lm, PR_LOG_ALWAYS, ("Begin PR_SuspendAll\n"));
/*
* turn off preemption - i.e add virtual alarm signal to the set of
* blocking signals
*/
rv = sigprocmask(
SIG_BLOCK, &javagc_vtalarm_sigmask, &javagc_intsoff_sigmask);
PR_ASSERT(0 == rv);
suspendAllSuspended = PR_TRUE;
PR_LOG(_pr_gc_lm, PR_LOG_ALWAYS, ("End PR_SuspendAll\n"));
} /* PR_SuspendAll */
PR_IMPLEMENT(void) PR_ResumeAll()
{
PRIntn rv;
suspendAllSuspended = PR_FALSE;
PR_LOG(_pr_gc_lm, PR_LOG_ALWAYS, ("Begin PR_ResumeAll\n"));
/* turn on preemption - i.e re-enable virtual alarm signal */
rv = sigprocmask(SIG_SETMASK, &javagc_intsoff_sigmask, (sigset_t *)NULL);
PR_ASSERT(0 == rv);
#ifdef DEBUG
suspendAllOn = PR_FALSE;
#endif
PR_LOG(_pr_gc_lm, PR_LOG_ALWAYS, ("End PR_ResumeAll\n"));
} /* PR_ResumeAll */
/* Return the stack pointer for the given thread- used by the GC */
PR_IMPLEMENT(void*)PR_GetSP(PRThread *thred)
{
pthread_t tid = thred->id;
char *thread_tcb, *top_sp;
/*
* For HPUX DCE threads, pthread_t is a struct with the
* following three fields (see pthread.h, dce/cma.h):
* cma_t_address field1;
* short int field2;
* short int field3;
* where cma_t_address is typedef'd to be either void*
* or char*.
*/
PR_LOG(_pr_gc_lm, PR_LOG_ALWAYS, ("Begin PR_GetSP\n"));
thread_tcb = (char*)tid.field1;
top_sp = *(char**)(thread_tcb + 128);
PR_LOG(_pr_gc_lm, PR_LOG_ALWAYS, ("End PR_GetSP %p \n", top_sp));
return top_sp;
} /* PR_GetSP */
#endif /* !defined(_PR_DCETHREADS) */
#endif /* defined(_PR_PTHREADS) || defined(_PR_DCETHREADS) */
/* ptthread.c */
Reference in New Issue View Git Blame Copy Permalink