kenmirrors
/
freeswitch
mirror of https://github.com/signalwire/freeswitch.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity
freeswitch/libs/js/nsprpub/pr/src/misc/prtime.c

1962 lines
68 KiB
C
Raw Blame History

/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
/* ***** BEGIN LICENSE BLOCK *****
* Version: MPL 1.1/GPL 2.0/LGPL 2.1
*
* The contents of this file are subject to the Mozilla Public License Version
* 1.1 (the "License"); you may not use this file except in compliance with
* the License. You may obtain a copy of the License at
* http://www.mozilla.org/MPL/
*
* Software distributed under the License is distributed on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
* for the specific language governing rights and limitations under the
* License.
*
* The Original Code is the Netscape Portable Runtime (NSPR).
*
* The Initial Developer of the Original Code is
* Netscape Communications Corporation.
* Portions created by the Initial Developer are Copyright (C) 1998-2000
* the Initial Developer. All Rights Reserved.
*
* Contributor(s):
*
* Alternatively, the contents of this file may be used under the terms of
* either the GNU General Public License Version 2 or later (the "GPL"), or
* the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
* in which case the provisions of the GPL or the LGPL are applicable instead
* of those above. If you wish to allow use of your version of this file only
* under the terms of either the GPL or the LGPL, and not to allow others to
* use your version of this file under the terms of the MPL, indicate your
* decision by deleting the provisions above and replace them with the notice
* and other provisions required by the GPL or the LGPL. If you do not delete
* the provisions above, a recipient may use your version of this file under
* the terms of any one of the MPL, the GPL or the LGPL.
*
* ***** END LICENSE BLOCK ***** */
/*
* prtime.c --
*
* NSPR date and time functions
*
*/
#include "prinit.h"
#include "prtime.h"
#include "prlock.h"
#include "prprf.h"
#include "prlog.h"
#include <string.h>
#include <ctype.h>
#ifdef XP_MAC
#include <time.h>
#endif
/*
* The COUNT_LEAPS macro counts the number of leap years passed by
* till the start of the given year Y. At the start of the year 4
* A.D. the number of leap years passed by is 0, while at the start of
* the year 5 A.D. this count is 1. The number of years divisible by
* 100 but not divisible by 400 (the non-leap years) is deducted from
* the count to get the correct number of leap years.
*
* The COUNT_DAYS macro counts the number of days since 01/01/01 till the
* start of the given year Y. The number of days at the start of the year
* 1 is 0 while the number of days at the start of the year 2 is 365
* (which is ((2)-1) * 365) and so on. The reference point is 01/01/01
* midnight 00:00:00.
*/
#define COUNT_LEAPS(Y) ( ((Y)-1)/4 - ((Y)-1)/100 + ((Y)-1)/400 )
#define COUNT_DAYS(Y) ( ((Y)-1)*365 + COUNT_LEAPS(Y) )
#define DAYS_BETWEEN_YEARS(A, B) (COUNT_DAYS(B) - COUNT_DAYS(A))
/*
* Static variables used by functions in this file
*/
/*
* The following array contains the day of year for the last day of
* each month, where index 1 is January, and day 0 is January 1.
*/
static const int lastDayOfMonth[2][13] = {
{-1, 30, 58, 89, 119, 150, 180, 211, 242, 272, 303, 333, 364},
{-1, 30, 59, 90, 120, 151, 181, 212, 243, 273, 304, 334, 365}
};
/*
* The number of days in a month
*/
static const PRInt8 nDays[2][12] = {
{31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31},
{31, 29, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31}
};
/*
* Declarations for internal functions defined later in this file.
*/
static void ComputeGMT(PRTime time, PRExplodedTime *gmt);
static int IsLeapYear(PRInt16 year);
static void ApplySecOffset(PRExplodedTime *time, PRInt32 secOffset);
/*
*------------------------------------------------------------------------
*
* ComputeGMT --
*
* Caveats:
* - we ignore leap seconds
* - our leap-year calculation is only correct for years 1901-2099
*
*------------------------------------------------------------------------
*/
static void
ComputeGMT(PRTime time, PRExplodedTime *gmt)
{
PRInt32 tmp, rem;
PRInt32 numDays;
PRInt64 numDays64, rem64;
int isLeap;
PRInt64 sec;
PRInt64 usec;
PRInt64 usecPerSec;
PRInt64 secPerDay;
/*
* We first do the usec, sec, min, hour thing so that we do not
* have to do LL arithmetic.
*/
LL_I2L(usecPerSec, 1000000L);
LL_DIV(sec, time, usecPerSec);
LL_MOD(usec, time, usecPerSec);
LL_L2I(gmt->tm_usec, usec);
/* Correct for weird mod semantics so the remainder is always positive */
if (gmt->tm_usec < 0) {
PRInt64 one;
LL_I2L(one, 1L);
LL_SUB(sec, sec, one);
gmt->tm_usec += 1000000L;
}
LL_I2L(secPerDay, 86400L);
LL_DIV(numDays64, sec, secPerDay);
LL_MOD(rem64, sec, secPerDay);
/* We are sure both of these numbers can fit into PRInt32 */
LL_L2I(numDays, numDays64);
LL_L2I(rem, rem64);
if (rem < 0) {
numDays--;
rem += 86400L;
}
/* Compute day of week. Epoch started on a Thursday. */
gmt->tm_wday = (numDays + 4) % 7;
if (gmt->tm_wday < 0) {
gmt->tm_wday += 7;
}
/* Compute the time of day. */
gmt->tm_hour = rem / 3600;
rem %= 3600;
gmt->tm_min = rem / 60;
gmt->tm_sec = rem % 60;
/* Compute the four-year span containing the specified time */
tmp = numDays / (4 * 365 + 1);
rem = numDays % (4 * 365 + 1);
if (rem < 0) {
tmp--;
rem += (4 * 365 + 1);
}
/*
* Compute the year after 1900 by taking the four-year span and
* adjusting for the remainder. This works because 2000 is a
* leap year, and 1900 and 2100 are out of the range.
*/
tmp = (tmp * 4) + 1970;
isLeap = 0;
/*
* 1970 has 365 days
* 1971 has 365 days
* 1972 has 366 days (leap year)
* 1973 has 365 days
*/
if (rem >= 365) { /* 1971, etc. */
tmp++;
rem -= 365;
if (rem >= 365) { /* 1972, etc. */
tmp++;
rem -= 365;
if (rem >= 366) { /* 1973, etc. */
tmp++;
rem -= 366;
} else {
isLeap = 1;
}
}
}
gmt->tm_year = tmp;
gmt->tm_yday = rem;
/* Compute the month and day of month. */
for (tmp = 1; lastDayOfMonth[isLeap][tmp] < gmt->tm_yday; tmp++) {
}
gmt->tm_month = --tmp;
gmt->tm_mday = gmt->tm_yday - lastDayOfMonth[isLeap][tmp];
gmt->tm_params.tp_gmt_offset = 0;
gmt->tm_params.tp_dst_offset = 0;
}
/*
*------------------------------------------------------------------------
*
* PR_ExplodeTime --
*
* Cf. struct tm *gmtime(const time_t *tp) and
* struct tm *localtime(const time_t *tp)
*
*------------------------------------------------------------------------
*/
PR_IMPLEMENT(void)
PR_ExplodeTime(
PRTime usecs,
PRTimeParamFn params,
PRExplodedTime *exploded)
{
ComputeGMT(usecs, exploded);
exploded->tm_params = params(exploded);
ApplySecOffset(exploded, exploded->tm_params.tp_gmt_offset
+ exploded->tm_params.tp_dst_offset);
}
/*
*------------------------------------------------------------------------
*
* PR_ImplodeTime --
*
* Cf. time_t mktime(struct tm *tp)
* Note that 1 year has < 2^25 seconds. So an PRInt32 is large enough.
*
*------------------------------------------------------------------------
*/
#if defined(HAVE_WATCOM_BUG_2)
PRTime __pascal __export __loadds
#else
PR_IMPLEMENT(PRTime)
#endif
PR_ImplodeTime(const PRExplodedTime *exploded)
{
PRExplodedTime copy;
PRTime retVal;
PRInt64 secPerDay, usecPerSec;
PRInt64 temp;
PRInt64 numSecs64;
PRInt32 numDays;
PRInt32 numSecs;
/* Normalize first. Do this on our copy */
copy = *exploded;
PR_NormalizeTime(&copy, PR_GMTParameters);
numDays = DAYS_BETWEEN_YEARS(1970, copy.tm_year);
numSecs = copy.tm_yday * 86400 + copy.tm_hour * 3600
+ copy.tm_min * 60 + copy.tm_sec;
LL_I2L(temp, numDays);
LL_I2L(secPerDay, 86400);
LL_MUL(temp, temp, secPerDay);
LL_I2L(numSecs64, numSecs);
LL_ADD(numSecs64, numSecs64, temp);
/* apply the GMT and DST offsets */
LL_I2L(temp, copy.tm_params.tp_gmt_offset);
LL_SUB(numSecs64, numSecs64, temp);
LL_I2L(temp, copy.tm_params.tp_dst_offset);
LL_SUB(numSecs64, numSecs64, temp);
LL_I2L(usecPerSec, 1000000L);
LL_MUL(temp, numSecs64, usecPerSec);
LL_I2L(retVal, copy.tm_usec);
LL_ADD(retVal, retVal, temp);
return retVal;
}
/*
*-------------------------------------------------------------------------
*
* IsLeapYear --
*
* Returns 1 if the year is a leap year, 0 otherwise.
*
*-------------------------------------------------------------------------
*/
static int IsLeapYear(PRInt16 year)
{
if ((year % 4 == 0 && year % 100 != 0) || year % 400 == 0)
return 1;
else
return 0;
}
/*
* 'secOffset' should be less than 86400 (i.e., a day).
* 'time' should point to a normalized PRExplodedTime.
*/
static void
ApplySecOffset(PRExplodedTime *time, PRInt32 secOffset)
{
time->tm_sec += secOffset;
/* Note that in this implementation we do not count leap seconds */
if (time->tm_sec < 0 || time->tm_sec >= 60) {
time->tm_min += time->tm_sec / 60;
time->tm_sec %= 60;
if (time->tm_sec < 0) {
time->tm_sec += 60;
time->tm_min--;
}
}
if (time->tm_min < 0 || time->tm_min >= 60) {
time->tm_hour += time->tm_min / 60;
time->tm_min %= 60;
if (time->tm_min < 0) {
time->tm_min += 60;
time->tm_hour--;
}
}
if (time->tm_hour < 0) {
/* Decrement mday, yday, and wday */
time->tm_hour += 24;
time->tm_mday--;
time->tm_yday--;
if (time->tm_mday < 1) {
time->tm_month--;
if (time->tm_month < 0) {
time->tm_month = 11;
time->tm_year--;
if (IsLeapYear(time->tm_year))
time->tm_yday = 365;
else
time->tm_yday = 364;
}
time->tm_mday = nDays[IsLeapYear(time->tm_year)][time->tm_month];
}
time->tm_wday--;
if (time->tm_wday < 0)
time->tm_wday = 6;
} else if (time->tm_hour > 23) {
/* Increment mday, yday, and wday */
time->tm_hour -= 24;
time->tm_mday++;
time->tm_yday++;
if (time->tm_mday >
nDays[IsLeapYear(time->tm_year)][time->tm_month]) {
time->tm_mday = 1;
time->tm_month++;
if (time->tm_month > 11) {
time->tm_month = 0;
time->tm_year++;
time->tm_yday = 0;
}
}
time->tm_wday++;
if (time->tm_wday > 6)
time->tm_wday = 0;
}
}
PR_IMPLEMENT(void)
PR_NormalizeTime(PRExplodedTime *time, PRTimeParamFn params)
{
int daysInMonth;
PRInt32 numDays;
/* Get back to GMT */
time->tm_sec -= time->tm_params.tp_gmt_offset
+ time->tm_params.tp_dst_offset;
time->tm_params.tp_gmt_offset = 0;
time->tm_params.tp_dst_offset = 0;
/* Now normalize GMT */
if (time->tm_usec < 0 || time->tm_usec >= 1000000) {
time->tm_sec += time->tm_usec / 1000000;
time->tm_usec %= 1000000;
if (time->tm_usec < 0) {
time->tm_usec += 1000000;
time->tm_sec--;
}
}
/* Note that we do not count leap seconds in this implementation */
if (time->tm_sec < 0 || time->tm_sec >= 60) {
time->tm_min += time->tm_sec / 60;
time->tm_sec %= 60;
if (time->tm_sec < 0) {
time->tm_sec += 60;
time->tm_min--;
}
}
if (time->tm_min < 0 || time->tm_min >= 60) {
time->tm_hour += time->tm_min / 60;
time->tm_min %= 60;
if (time->tm_min < 0) {
time->tm_min += 60;
time->tm_hour--;
}
}
if (time->tm_hour < 0 || time->tm_hour >= 24) {
time->tm_mday += time->tm_hour / 24;
time->tm_hour %= 24;
if (time->tm_hour < 0) {
time->tm_hour += 24;
time->tm_mday--;
}
}
/* Normalize month and year before mday */
if (time->tm_month < 0 || time->tm_month >= 12) {
time->tm_year += time->tm_month / 12;
time->tm_month %= 12;
if (time->tm_month < 0) {
time->tm_month += 12;
time->tm_year--;
}
}
/* Now that month and year are in proper range, normalize mday */
if (time->tm_mday < 1) {
/* mday too small */
do {
/* the previous month */
time->tm_month--;
if (time->tm_month < 0) {
time->tm_month = 11;
time->tm_year--;
}
time->tm_mday += nDays[IsLeapYear(time->tm_year)][time->tm_month];
} while (time->tm_mday < 1);
} else {
daysInMonth = nDays[IsLeapYear(time->tm_year)][time->tm_month];
while (time->tm_mday > daysInMonth) {
/* mday too large */
time->tm_mday -= daysInMonth;
time->tm_month++;
if (time->tm_month > 11) {
time->tm_month = 0;
time->tm_year++;
}
daysInMonth = nDays[IsLeapYear(time->tm_year)][time->tm_month];
}
}
/* Recompute yday and wday */
time->tm_yday = time->tm_mday +
lastDayOfMonth[IsLeapYear(time->tm_year)][time->tm_month];
numDays = DAYS_BETWEEN_YEARS(1970, time->tm_year) + time->tm_yday;
time->tm_wday = (numDays + 4) % 7;
if (time->tm_wday < 0) {
time->tm_wday += 7;
}
/* Recompute time parameters */
time->tm_params = params(time);
ApplySecOffset(time, time->tm_params.tp_gmt_offset
+ time->tm_params.tp_dst_offset);
}
/*
*-------------------------------------------------------------------------
*
* PR_LocalTimeParameters --
*
* returns the time parameters for the local time zone
*
* The following uses localtime() from the standard C library.
* (time.h) This is our fallback implementation. Unix and PC
* use this version. Mac has its own machine-dependent
* implementation of this function.
*
*-------------------------------------------------------------------------
*/
#include <time.h>
#if defined(HAVE_INT_LOCALTIME_R)
/*
* In this case we could define the macro as
* #define MT_safe_localtime(timer, result) \
* (localtime_r(timer, result) == 0 ? result : NULL)
* I chose to compare the return value of localtime_r with -1 so
* that I can catch the cases where localtime_r returns a pointer
* to struct tm. The macro definition above would not be able to
* detect such mistakes because it is legal to compare a pointer
* with 0.
*/
#define MT_safe_localtime(timer, result) \
(localtime_r(timer, result) == -1 ? NULL: result)
#elif defined(HAVE_POINTER_LOCALTIME_R)
#define MT_safe_localtime localtime_r
#else
#if defined(XP_MAC)
extern struct tm *Maclocaltime(const time_t * t);
#endif
static PRLock *monitor = NULL;
static struct tm *MT_safe_localtime(const time_t *clock, struct tm *result)
{
struct tm *tmPtr;
int needLock = PR_Initialized(); /* We need to use a lock to protect
* against NSPR threads only when the
* NSPR thread system is activated. */
if (needLock) {
if (monitor == NULL) {
monitor = PR_NewLock();
}
PR_Lock(monitor);
}
/*
* Microsoft (all flavors) localtime() returns a NULL pointer if 'clock'
* represents a time before midnight January 1, 1970. In
* that case, we also return a NULL pointer and the struct tm
* object pointed to by 'result' is not modified.
*
* Watcom C/C++ 11.0 localtime() treats time_t as unsigned long
* hence, does not recognize negative values of clock as pre-1/1/70.
* We have to manually check (WIN16 only) for negative value of
* clock and return NULL.
*
* With negative values of clock, emx returns the struct tm for
* clock plus ULONG_MAX. So we also have to check for the invalid
* structs returned for timezones west of Greenwich when clock == 0.
*/
#if defined(XP_MAC)
tmPtr = Maclocaltime(clock);
#else
tmPtr = localtime(clock);
#endif
#if defined(WIN16) || defined(XP_OS2_EMX)
if ( (PRInt32) *clock < 0 ||
( (PRInt32) *clock == 0 && tmPtr->tm_year != 70))
result = NULL;
else
*result = *tmPtr;
#else
if (tmPtr) {
*result = *tmPtr;
} else {
result = NULL;
}
#endif /* WIN16 */
if (needLock) PR_Unlock(monitor);
return result;
}
#endif /* definition of MT_safe_localtime() */
#if defined(XP_UNIX) || defined(XP_PC) || defined(XP_BEOS)
PR_IMPLEMENT(PRTimeParameters)
PR_LocalTimeParameters(const PRExplodedTime *gmt)
{
PRTimeParameters retVal;
struct tm localTime;
time_t secs;
PRTime secs64;
PRInt64 usecPerSec;
PRInt64 usecPerSec_1;
PRInt64 maxInt32;
PRInt64 minInt32;
PRInt32 dayOffset;
PRInt32 offset2Jan1970;
PRInt32 offsetNew;
int isdst2Jan1970;
/*
* Calculate the GMT offset. First, figure out what is
* 00:00:00 Jan. 2, 1970 GMT (which is exactly a day, or 86400
* seconds, since the epoch) in local time. Then we calculate
* the difference between local time and GMT in seconds:
* gmt_offset = local_time - GMT
*
* Caveat: the validity of this calculation depends on two
* assumptions:
* 1. Daylight saving time was not in effect on Jan. 2, 1970.
* 2. The time zone of the geographic location has not changed
* since Jan. 2, 1970.
*/
secs = 86400L;
(void) MT_safe_localtime(&secs, &localTime);
/* GMT is 00:00:00, 2nd of Jan. */
offset2Jan1970 = (PRInt32)localTime.tm_sec
+ 60L * (PRInt32)localTime.tm_min
+ 3600L * (PRInt32)localTime.tm_hour
+ 86400L * (PRInt32)((PRInt32)localTime.tm_mday - 2L);
isdst2Jan1970 = localTime.tm_isdst;
/*
* Now compute DST offset. We calculate the overall offset
* of local time from GMT, similar to above. The overall
* offset has two components: gmt offset and dst offset.
* We subtract gmt offset from the overall offset to get
* the dst offset.
* overall_offset = local_time - GMT
* overall_offset = gmt_offset + dst_offset
* ==> dst_offset = local_time - GMT - gmt_offset
*/
secs64 = PR_ImplodeTime(gmt); /* This is still in microseconds */
LL_I2L(usecPerSec, PR_USEC_PER_SEC);
LL_I2L(usecPerSec_1, PR_USEC_PER_SEC - 1);
/* Convert to seconds, truncating down (3.1 -> 3 and -3.1 -> -4) */
if (LL_GE_ZERO(secs64)) {
LL_DIV(secs64, secs64, usecPerSec);
} else {
LL_NEG(secs64, secs64);
LL_ADD(secs64, secs64, usecPerSec_1);
LL_DIV(secs64, secs64, usecPerSec);
LL_NEG(secs64, secs64);
}
LL_I2L(maxInt32, PR_INT32_MAX);
LL_I2L(minInt32, PR_INT32_MIN);
if (LL_CMP(secs64, >, maxInt32) || LL_CMP(secs64, <, minInt32)) {
/* secs64 is too large or too small for time_t (32-bit integer) */
retVal.tp_gmt_offset = offset2Jan1970;
retVal.tp_dst_offset = 0;
return retVal;
}
LL_L2I(secs, secs64);
/*
* On Windows, localtime() (and our MT_safe_localtime() too)
* returns a NULL pointer for time before midnight January 1,
* 1970 GMT. In that case, we just use the GMT offset for
* Jan 2, 1970 and assume that DST was not in effect.
*/
if (MT_safe_localtime(&secs, &localTime) == NULL) {
retVal.tp_gmt_offset = offset2Jan1970;
retVal.tp_dst_offset = 0;
return retVal;
}
/*
* dayOffset is the offset between local time and GMT in
* the day component, which can only be -1, 0, or 1. We
* use the day of the week to compute dayOffset.
*/
dayOffset = (PRInt32) localTime.tm_wday - gmt->tm_wday;
/*
* Need to adjust for wrapping around of day of the week from
* 6 back to 0.
*/
if (dayOffset == -6) {
/* Local time is Sunday (0) and GMT is Saturday (6) */
dayOffset = 1;
} else if (dayOffset == 6) {
/* Local time is Saturday (6) and GMT is Sunday (0) */
dayOffset = -1;
}
offsetNew = (PRInt32)localTime.tm_sec - gmt->tm_sec
+ 60L * ((PRInt32)localTime.tm_min - gmt->tm_min)
+ 3600L * ((PRInt32)localTime.tm_hour - gmt->tm_hour)
+ 86400L * (PRInt32)dayOffset;
if (localTime.tm_isdst <= 0) {
/* DST is not in effect */
retVal.tp_gmt_offset = offsetNew;
retVal.tp_dst_offset = 0;
} else {
/* DST is in effect */
if (isdst2Jan1970 <=0) {
/*
* DST was not in effect back in 2 Jan. 1970.
* Use the offset back then as the GMT offset,
* assuming the time zone has not changed since then.
*/
retVal.tp_gmt_offset = offset2Jan1970;
retVal.tp_dst_offset = offsetNew - offset2Jan1970;
} else {
/*
* DST was also in effect back in 2 Jan. 1970.
* Then our clever trick (or rather, ugly hack) fails.
* We will just assume DST offset is an hour.
*/
retVal.tp_gmt_offset = offsetNew - 3600;
retVal.tp_dst_offset = 3600;
}
}
return retVal;
}
#endif /* defined(XP_UNIX) !! defined(XP_PC) */
/*
*------------------------------------------------------------------------
*
* PR_USPacificTimeParameters --
*
* The time parameters function for the US Pacific Time Zone.
*
*------------------------------------------------------------------------
*/
PR_IMPLEMENT(PRTimeParameters)
PR_USPacificTimeParameters(const PRExplodedTime *gmt)
{
PRTimeParameters retVal;
PRExplodedTime st;
/*
* Based on geographic location and GMT, figure out offset of
* standard time from GMT. In this example implementation, we
* assume the local time zone is US Pacific Time.
*/
retVal.tp_gmt_offset = -8L * 3600L;
/*
* Make a copy of GMT. Note that the tm_params field of this copy
* is ignored.
*/
st.tm_usec = gmt->tm_usec;
st.tm_sec = gmt->tm_sec;
st.tm_min = gmt->tm_min;
st.tm_hour = gmt->tm_hour;
st.tm_mday = gmt->tm_mday;
st.tm_month = gmt->tm_month;
st.tm_year = gmt->tm_year;
st.tm_wday = gmt->tm_wday;
st.tm_yday = gmt->tm_yday;
/* Apply the offset to GMT to obtain the local standard time */
ApplySecOffset(&st, retVal.tp_gmt_offset);
/*
* Apply the rules on standard time or GMT to obtain daylight saving
* time offset. In this implementation, we use the US DST rule.
*/
if (st.tm_month < 3) {
retVal.tp_dst_offset = 0L;
} else if (st.tm_month == 3) {
if (st.tm_wday == 0) {
/* A Sunday */
if (st.tm_mday <= 7) {
/* First Sunday */
/* 01:59:59 PST -> 03:00:00 PDT */
if (st.tm_hour < 2) {
retVal.tp_dst_offset = 0L;
} else {
retVal.tp_dst_offset = 3600L;
}
} else {
/* Not first Sunday */
retVal.tp_dst_offset = 3600L;
}
} else {
/* Not a Sunday. See if before first Sunday or after */
if (st.tm_wday + 1 <= st.tm_mday) {
/* After first Sunday */
retVal.tp_dst_offset = 3600L;
} else {
/* Before first Sunday */
retVal.tp_dst_offset = 0L;
}
}
} else if (st.tm_month < 9) {
retVal.tp_dst_offset = 3600L;
} else if (st.tm_month == 9) {
if (st.tm_wday == 0) {
if (31 - st.tm_mday < 7) {
/* Last Sunday */
/* 01:59:59 PDT -> 01:00:00 PST */
if (st.tm_hour < 1) {
retVal.tp_dst_offset = 3600L;
} else {
retVal.tp_dst_offset = 0L;
}
} else {
/* Not last Sunday */
retVal.tp_dst_offset = 3600L;
}
} else {
/* See if before or after last Sunday */
if (7 - st.tm_wday <= 31 - st.tm_mday) {
/* before last Sunday */
retVal.tp_dst_offset = 3600L;
} else {
retVal.tp_dst_offset = 0L;
}
}
} else {
retVal.tp_dst_offset = 0L;
}
return retVal;
}
/*
*------------------------------------------------------------------------
*
* PR_GMTParameters --
*
* Returns the PRTimeParameters for Greenwich Mean Time.
* Trivially, both the tp_gmt_offset and tp_dst_offset fields are 0.
*
*------------------------------------------------------------------------
*/
PR_IMPLEMENT(PRTimeParameters)
PR_GMTParameters(const PRExplodedTime *gmt)
{
#if defined(XP_MAC)
#pragma unused (gmt)
#endif
PRTimeParameters retVal = { 0, 0 };
return retVal;
}
/*
* The following code implements PR_ParseTimeString(). It is based on
* ns/lib/xp/xp_time.c, revision 1.25, by Jamie Zawinski <jwz@netscape.com>.
*/
/*
* We only recognize the abbreviations of a small subset of time zones
* in North America, Europe, and Japan.
*
* PST/PDT: Pacific Standard/Daylight Time
* MST/MDT: Mountain Standard/Daylight Time
* CST/CDT: Central Standard/Daylight Time
* EST/EDT: Eastern Standard/Daylight Time
* AST: Atlantic Standard Time
* NST: Newfoundland Standard Time
* GMT: Greenwich Mean Time
* BST: British Summer Time
* MET: Middle Europe Time
* EET: Eastern Europe Time
* JST: Japan Standard Time
*/
typedef enum
{
TT_UNKNOWN,
TT_SUN, TT_MON, TT_TUE, TT_WED, TT_THU, TT_FRI, TT_SAT,
TT_JAN, TT_FEB, TT_MAR, TT_APR, TT_MAY, TT_JUN,
TT_JUL, TT_AUG, TT_SEP, TT_OCT, TT_NOV, TT_DEC,
TT_PST, TT_PDT, TT_MST, TT_MDT, TT_CST, TT_CDT, TT_EST, TT_EDT,
TT_AST, TT_NST, TT_GMT, TT_BST, TT_MET, TT_EET, TT_JST
} TIME_TOKEN;
/*
* This parses a time/date string into a PRTime
* (microseconds after "1-Jan-1970 00:00:00 GMT").
* It returns PR_SUCCESS on success, and PR_FAILURE
* if the time/date string can't be parsed.
*
* Many formats are handled, including:
*
* 14 Apr 89 03:20:12
* 14 Apr 89 03:20 GMT
* Fri, 17 Mar 89 4:01:33
* Fri, 17 Mar 89 4:01 GMT
* Mon Jan 16 16:12 PDT 1989
* Mon Jan 16 16:12 +0130 1989
* 6 May 1992 16:41-JST (Wednesday)
* 22-AUG-1993 10:59:12.82
* 22-AUG-1993 10:59pm
* 22-AUG-1993 12:59am
* 22-AUG-1993 12:59 PM
* Friday, August 04, 1995 3:54 PM
* 06/21/95 04:24:34 PM
* 20/06/95 21:07
* 95-06-08 19:32:48 EDT
*
* If the input string doesn't contain a description of the timezone,
* we consult the `default_to_gmt' to decide whether the string should
* be interpreted relative to the local time zone (PR_FALSE) or GMT (PR_TRUE).
* The correct value for this argument depends on what standard specified
* the time string which you are parsing.
*/
PR_IMPLEMENT(PRStatus)
PR_ParseTimeString(
const char *string,
PRBool default_to_gmt,
PRTime *result)
{
PRExplodedTime tm;
TIME_TOKEN dotw = TT_UNKNOWN;
TIME_TOKEN month = TT_UNKNOWN;
TIME_TOKEN zone = TT_UNKNOWN;
int zone_offset = -1;
int date = -1;
PRInt32 year = -1;
int hour = -1;
int min = -1;
int sec = -1;
const char *rest = string;
#ifdef DEBUG
int iterations = 0;
#endif
PR_ASSERT(string && result);
if (!string || !result) return PR_FAILURE;
while (*rest)
{
#ifdef DEBUG
if (iterations++ > 1000)
{
PR_ASSERT(0);
return PR_FAILURE;
}
#endif
switch (*rest)
{
case 'a': case 'A':
if (month == TT_UNKNOWN &&
(rest[1] == 'p' || rest[1] == 'P') &&
(rest[2] == 'r' || rest[2] == 'R'))
month = TT_APR;
else if (zone == TT_UNKNOWN &&
(rest[1] == 's' || rest[1] == 's') &&
(rest[2] == 't' || rest[2] == 'T'))
zone = TT_AST;
else if (month == TT_UNKNOWN &&
(rest[1] == 'u' || rest[1] == 'U') &&
(rest[2] == 'g' || rest[2] == 'G'))
month = TT_AUG;
break;
case 'b': case 'B':
if (zone == TT_UNKNOWN &&
(rest[1] == 's' || rest[1] == 'S') &&
(rest[2] == 't' || rest[2] == 'T'))
zone = TT_BST;
break;
case 'c': case 'C':
if (zone == TT_UNKNOWN &&
(rest[1] == 'd' || rest[1] == 'D') &&
(rest[2] == 't' || rest[2] == 'T'))
zone = TT_CDT;
else if (zone == TT_UNKNOWN &&
(rest[1] == 's' || rest[1] == 'S') &&
(rest[2] == 't' || rest[2] == 'T'))
zone = TT_CST;
break;
case 'd': case 'D':
if (month == TT_UNKNOWN &&
(rest[1] == 'e' || rest[1] == 'E') &&
(rest[2] == 'c' || rest[2] == 'C'))
month = TT_DEC;
break;
case 'e': case 'E':
if (zone == TT_UNKNOWN &&
(rest[1] == 'd' || rest[1] == 'D') &&
(rest[2] == 't' || rest[2] == 'T'))
zone = TT_EDT;
else if (zone == TT_UNKNOWN &&
(rest[1] == 'e' || rest[1] == 'E') &&
(rest[2] == 't' || rest[2] == 'T'))
zone = TT_EET;
else if (zone == TT_UNKNOWN &&
(rest[1] == 's' || rest[1] == 'S') &&
(rest[2] == 't' || rest[2] == 'T'))
zone = TT_EST;
break;
case 'f': case 'F':
if (month == TT_UNKNOWN &&
(rest[1] == 'e' || rest[1] == 'E') &&
(rest[2] == 'b' || rest[2] == 'B'))
month = TT_FEB;
else if (dotw == TT_UNKNOWN &&
(rest[1] == 'r' || rest[1] == 'R') &&
(rest[2] == 'i' || rest[2] == 'I'))
dotw = TT_FRI;
break;
case 'g': case 'G':
if (zone == TT_UNKNOWN &&
(rest[1] == 'm' || rest[1] == 'M') &&
(rest[2] == 't' || rest[2] == 'T'))
zone = TT_GMT;
break;
case 'j': case 'J':
if (month == TT_UNKNOWN &&
(rest[1] == 'a' || rest[1] == 'A') &&
(rest[2] == 'n' || rest[2] == 'N'))
month = TT_JAN;
else if (zone == TT_UNKNOWN &&
(rest[1] == 's' || rest[1] == 'S') &&
(rest[2] == 't' || rest[2] == 'T'))
zone = TT_JST;
else if (month == TT_UNKNOWN &&
(rest[1] == 'u' || rest[1] == 'U') &&
(rest[2] == 'l' || rest[2] == 'L'))
month = TT_JUL;
else if (month == TT_UNKNOWN &&
(rest[1] == 'u' || rest[1] == 'U') &&
(rest[2] == 'n' || rest[2] == 'N'))
month = TT_JUN;
break;
case 'm': case 'M':
if (month == TT_UNKNOWN &&
(rest[1] == 'a' || rest[1] == 'A') &&
(rest[2] == 'r' || rest[2] == 'R'))
month = TT_MAR;
else if (month == TT_UNKNOWN &&
(rest[1] == 'a' || rest[1] == 'A') &&
(rest[2] == 'y' || rest[2] == 'Y'))
month = TT_MAY;
else if (zone == TT_UNKNOWN &&
(rest[1] == 'd' || rest[1] == 'D') &&
(rest[2] == 't' || rest[2] == 'T'))
zone = TT_MDT;
else if (zone == TT_UNKNOWN &&
(rest[1] == 'e' || rest[1] == 'E') &&
(rest[2] == 't' || rest[2] == 'T'))
zone = TT_MET;
else if (dotw == TT_UNKNOWN &&
(rest[1] == 'o' || rest[1] == 'O') &&
(rest[2] == 'n' || rest[2] == 'N'))
dotw = TT_MON;
else if (zone == TT_UNKNOWN &&
(rest[1] == 's' || rest[1] == 'S') &&
(rest[2] == 't' || rest[2] == 'T'))
zone = TT_MST;
break;
case 'n': case 'N':
if (month == TT_UNKNOWN &&
(rest[1] == 'o' || rest[1] == 'O') &&
(rest[2] == 'v' || rest[2] == 'V'))
month = TT_NOV;
else if (zone == TT_UNKNOWN &&
(rest[1] == 's' || rest[1] == 'S') &&
(rest[2] == 't' || rest[2] == 'T'))
zone = TT_NST;
break;
case 'o': case 'O':
if (month == TT_UNKNOWN &&
(rest[1] == 'c' || rest[1] == 'C') &&
(rest[2] == 't' || rest[2] == 'T'))
month = TT_OCT;
break;
case 'p': case 'P':
if (zone == TT_UNKNOWN &&
(rest[1] == 'd' || rest[1] == 'D') &&
(rest[2] == 't' || rest[2] == 'T'))
zone = TT_PDT;
else if (zone == TT_UNKNOWN &&
(rest[1] == 's' || rest[1] == 'S') &&
(rest[2] == 't' || rest[2] == 'T'))
zone = TT_PST;
break;
case 's': case 'S':
if (dotw == TT_UNKNOWN &&
(rest[1] == 'a' || rest[1] == 'A') &&
(rest[2] == 't' || rest[2] == 'T'))
dotw = TT_SAT;
else if (month == TT_UNKNOWN &&
(rest[1] == 'e' || rest[1] == 'E') &&
(rest[2] == 'p' || rest[2] == 'P'))
month = TT_SEP;
else if (dotw == TT_UNKNOWN &&
(rest[1] == 'u' || rest[1] == 'U') &&
(rest[2] == 'n' || rest[2] == 'N'))
dotw = TT_SUN;
break;
case 't': case 'T':
if (dotw == TT_UNKNOWN &&
(rest[1] == 'h' || rest[1] == 'H') &&
(rest[2] == 'u' || rest[2] == 'U'))
dotw = TT_THU;
else if (dotw == TT_UNKNOWN &&
(rest[1] == 'u' || rest[1] == 'U') &&
(rest[2] == 'e' || rest[2] == 'E'))
dotw = TT_TUE;
break;
case 'u': case 'U':
if (zone == TT_UNKNOWN &&
(rest[1] == 't' || rest[1] == 'T') &&
!(rest[2] >= 'A' && rest[2] <= 'Z') &&
!(rest[2] >= 'a' && rest[2] <= 'z'))
/* UT is the same as GMT but UTx is not. */
zone = TT_GMT;
break;
case 'w': case 'W':
if (dotw == TT_UNKNOWN &&
(rest[1] == 'e' || rest[1] == 'E') &&
(rest[2] == 'd' || rest[2] == 'D'))
dotw = TT_WED;
break;
case '+': case '-':
{
const char *end;
int sign;
if (zone_offset != -1)
{
/* already got one... */
rest++;
break;
}
if (zone != TT_UNKNOWN && zone != TT_GMT)
{
/* GMT+0300 is legal, but PST+0300 is not. */
rest++;
break;
}
sign = ((*rest == '+') ? 1 : -1);
rest++; /* move over sign */
end = rest;
while (*end >= '0' && *end <= '9')
end++;
if (rest == end) /* no digits here */
break;
if ((end - rest) == 4)
/* offset in HHMM */
zone_offset = (((((rest[0]-'0')*10) + (rest[1]-'0')) * 60) +
(((rest[2]-'0')*10) + (rest[3]-'0')));
else if ((end - rest) == 2)
/* offset in hours */
zone_offset = (((rest[0]-'0')*10) + (rest[1]-'0')) * 60;
else if ((end - rest) == 1)
/* offset in hours */
zone_offset = (rest[0]-'0') * 60;
else
/* 3 or >4 */
break;
zone_offset *= sign;
zone = TT_GMT;
break;
}
case '0': case '1': case '2': case '3': case '4':
case '5': case '6': case '7': case '8': case '9':
{
int tmp_hour = -1;
int tmp_min = -1;
int tmp_sec = -1;
const char *end = rest + 1;
while (*end >= '0' && *end <= '9')
end++;
/* end is now the first character after a range of digits. */
if (*end == ':')
{
if (hour >= 0 && min >= 0) /* already got it */
break;
/* We have seen "[0-9]+:", so this is probably HH:MM[:SS] */
if ((end - rest) > 2)
/* it is [0-9][0-9][0-9]+: */
break;
else if ((end - rest) == 2)
tmp_hour = ((rest[0]-'0')*10 +
(rest[1]-'0'));
else
tmp_hour = (rest[0]-'0');
while (*rest && *rest != ':')
rest++;
rest++;
/* move over the colon, and parse minutes */
end = rest + 1;
while (*end >= '0' && *end <= '9')
end++;
if (end == rest)
/* no digits after first colon? */
break;
else if ((end - rest) > 2)
/* it is [0-9][0-9][0-9]+: */
break;
else if ((end - rest) == 2)
tmp_min = ((rest[0]-'0')*10 +
(rest[1]-'0'));
else
tmp_min = (rest[0]-'0');
/* now go for seconds */
rest = end;
if (*rest == ':')
rest++;
end = rest;
while (*end >= '0' && *end <= '9')
end++;
if (end == rest)
/* no digits after second colon - that's ok. */
;
else if ((end - rest) > 2)
/* it is [0-9][0-9][0-9]+: */
break;
else if ((end - rest) == 2)
tmp_sec = ((rest[0]-'0')*10 +
(rest[1]-'0'));
else
tmp_sec = (rest[0]-'0');
/* If we made it here, we've parsed hour and min,
and possibly sec, so it worked as a unit. */
/* skip over whitespace and see if there's an AM or PM
directly following the time.
*/
if (tmp_hour <= 12)
{
const char *s = end;
while (*s && (*s == ' ' || *s == '\t'))
s++;
if ((s[0] == 'p' || s[0] == 'P') &&
(s[1] == 'm' || s[1] == 'M'))
/* 10:05pm == 22:05, and 12:05pm == 12:05 */
tmp_hour = (tmp_hour == 12 ? 12 : tmp_hour + 12);
else if (tmp_hour == 12 &&
(s[0] == 'a' || s[0] == 'A') &&
(s[1] == 'm' || s[1] == 'M'))
/* 12:05am == 00:05 */
tmp_hour = 0;
}
hour = tmp_hour;
min = tmp_min;
sec = tmp_sec;
rest = end;
break;
}
else if ((*end == '/' || *end == '-') &&
end[1] >= '0' && end[1] <= '9')
{
/* Perhaps this is 6/16/95, 16/6/95, 6-16-95, or 16-6-95
or even 95-06-05...
#### But it doesn't handle 1995-06-22.
*/
int n1, n2, n3;
const char *s;
if (month != TT_UNKNOWN)
/* if we saw a month name, this can't be. */
break;
s = rest;
n1 = (*s++ - '0'); /* first 1 or 2 digits */
if (*s >= '0' && *s <= '9')
n1 = n1*10 + (*s++ - '0');
if (*s != '/' && *s != '-') /* slash */
break;
s++;
if (*s < '0' || *s > '9') /* second 1 or 2 digits */
break;
n2 = (*s++ - '0');
if (*s >= '0' && *s <= '9')
n2 = n2*10 + (*s++ - '0');
if (*s != '/' && *s != '-') /* slash */
break;
s++;
if (*s < '0' || *s > '9') /* third 1, 2, or 4 digits */
break;
n3 = (*s++ - '0');
if (*s >= '0' && *s <= '9')
n3 = n3*10 + (*s++ - '0');
if (*s >= '0' && *s <= '9') /* optional digits 3 and 4 */
{
n3 = n3*10 + (*s++ - '0');
if (*s < '0' || *s > '9')
break;
n3 = n3*10 + (*s++ - '0');
}
if ((*s >= '0' && *s <= '9') || /* followed by non-alphanum */
(*s >= 'A' && *s <= 'Z') ||
(*s >= 'a' && *s <= 'z'))
break;
/* Ok, we parsed three 1-2 digit numbers, with / or -
between them. Now decide what the hell they are
(DD/MM/YY or MM/DD/YY or YY/MM/DD.)
*/
if (n1 > 31 || n1 == 0) /* must be YY/MM/DD */
{
if (n2 > 12) break;
if (n3 > 31) break;
year = n1;
if (year < 70)
year += 2000;
else if (year < 100)
year += 1900;
month = (TIME_TOKEN)(n2 + ((int)TT_JAN) - 1);
date = n3;
rest = s;
break;
}
if (n1 > 12 && n2 > 12) /* illegal */
{
rest = s;
break;
}
if (n3 < 70)
n3 += 2000;
else if (n3 < 100)
n3 += 1900;
if (n1 > 12) /* must be DD/MM/YY */
{
date = n1;
month = (TIME_TOKEN)(n2 + ((int)TT_JAN) - 1);
year = n3;
}
else /* assume MM/DD/YY */
{
/* #### In the ambiguous case, should we consult the
locale to find out the local default? */
month = (TIME_TOKEN)(n1 + ((int)TT_JAN) - 1);
date = n2;
year = n3;
}
rest = s;
}
else if ((*end >= 'A' && *end <= 'Z') ||
(*end >= 'a' && *end <= 'z'))
/* Digits followed by non-punctuation - what's that? */
;
else if ((end - rest) == 4) /* four digits is a year */
year = (year < 0
? ((rest[0]-'0')*1000L +
(rest[1]-'0')*100L +
(rest[2]-'0')*10L +
(rest[3]-'0'))
: year);
else if ((end - rest) == 2) /* two digits - date or year */
{
int n = ((rest[0]-'0')*10 +
(rest[1]-'0'));
/* If we don't have a date (day of the month) and we see a number
less than 32, then assume that is the date.
Otherwise, if we have a date and not a year, assume this is the
year. If it is less than 70, then assume it refers to the 21st
century. If it is two digits (>= 70), assume it refers to this
century. Otherwise, assume it refers to an unambiguous year.
The world will surely end soon.
*/
if (date < 0 && n < 32)
date = n;
else if (year < 0)
{
if (n < 70)
year = 2000 + n;
else if (n < 100)
year = 1900 + n;
else
year = n;
}
/* else what the hell is this. */
}
else if ((end - rest) == 1) /* one digit - date */
date = (date < 0 ? (rest[0]-'0') : date);
/* else, three or more than four digits - what's that? */
break;
}
}
/* Skip to the end of this token, whether we parsed it or not.
Tokens are delimited by whitespace, or ,;-/
But explicitly not :+-.
*/
while (*rest &&
*rest != ' ' && *rest != '\t' &&
*rest != ',' && *rest != ';' &&
*rest != '-' && *rest != '+' &&
*rest != '/' &&
*rest != '(' && *rest != ')' && *rest != '[' && *rest != ']')
rest++;
/* skip over uninteresting chars. */
SKIP_MORE:
while (*rest &&
(*rest == ' ' || *rest == '\t' ||
*rest == ',' || *rest == ';' || *rest == '/' ||
*rest == '(' || *rest == ')' || *rest == '[' || *rest == ']'))
rest++;
/* "-" is ignored at the beginning of a token if we have not yet
parsed a year (e.g., the second "-" in "30-AUG-1966"), or if
the character after the dash is not a digit. */
if (*rest == '-' && ((rest > string && isalpha(rest[-1]) && year < 0)
|| rest[1] < '0' || rest[1] > '9'))
{
rest++;
goto SKIP_MORE;
}
}
if (zone != TT_UNKNOWN && zone_offset == -1)
{
switch (zone)
{
case TT_PST: zone_offset = -8 * 60; break;
case TT_PDT: zone_offset = -7 * 60; break;
case TT_MST: zone_offset = -7 * 60; break;
case TT_MDT: zone_offset = -6 * 60; break;
case TT_CST: zone_offset = -6 * 60; break;
case TT_CDT: zone_offset = -5 * 60; break;
case TT_EST: zone_offset = -5 * 60; break;
case TT_EDT: zone_offset = -4 * 60; break;
case TT_AST: zone_offset = -4 * 60; break;
case TT_NST: zone_offset = -3 * 60 - 30; break;
case TT_GMT: zone_offset = 0 * 60; break;
case TT_BST: zone_offset = 1 * 60; break;
case TT_MET: zone_offset = 1 * 60; break;
case TT_EET: zone_offset = 2 * 60; break;
case TT_JST: zone_offset = 9 * 60; break;
default:
PR_ASSERT (0);
break;
}
}
/* If we didn't find a year, month, or day-of-the-month, we can't
possibly parse this, and in fact, mktime() will do something random
(I'm seeing it return "Tue Feb 5 06:28:16 2036", which is no doubt
a numerologically significant date... */
if (month == TT_UNKNOWN || date == -1 || year == -1)
return PR_FAILURE;
memset(&tm, 0, sizeof(tm));
if (sec != -1)
tm.tm_sec = sec;
if (min != -1)
tm.tm_min = min;
if (hour != -1)
tm.tm_hour = hour;
if (date != -1)
tm.tm_mday = date;
if (month != TT_UNKNOWN)
tm.tm_month = (((int)month) - ((int)TT_JAN));
if (year != -1)
tm.tm_year = year;
if (dotw != TT_UNKNOWN)
tm.tm_wday = (((int)dotw) - ((int)TT_SUN));
if (zone == TT_UNKNOWN && default_to_gmt)
{
/* No zone was specified, so pretend the zone was GMT. */
zone = TT_GMT;
zone_offset = 0;
}
if (zone_offset == -1)
{
/* no zone was specified, and we're to assume that everything
is local. */
struct tm localTime;
time_t secs;
PR_ASSERT(tm.tm_month > -1
&& tm.tm_mday > 0
&& tm.tm_hour > -1
&& tm.tm_min > -1
&& tm.tm_sec > -1);
/*
* To obtain time_t from a tm structure representing the local
* time, we call mktime(). However, we need to see if we are
* on 1-Jan-1970 or before. If we are, we can't call mktime()
* because mktime() will crash on win16. In that case, we
* calculate zone_offset based on the zone offset at
* 00:00:00, 2 Jan 1970 GMT, and subtract zone_offset from the
* date we are parsing to transform the date to GMT. We also
* do so if mktime() returns (time_t) -1 (time out of range).
*/
/* month, day, hours, mins and secs are always non-negative
so we dont need to worry about them. */
if(tm.tm_year >= 1970)
{
PRInt64 usec_per_sec;
localTime.tm_sec = tm.tm_sec;
localTime.tm_min = tm.tm_min;
localTime.tm_hour = tm.tm_hour;
localTime.tm_mday = tm.tm_mday;
localTime.tm_mon = tm.tm_month;
localTime.tm_year = tm.tm_year - 1900;
/* Set this to -1 to tell mktime "I don't care". If you set
it to 0 or 1, you are making assertions about whether the
date you are handing it is in daylight savings mode or not;
and if you're wrong, it will "fix" it for you. */
localTime.tm_isdst = -1;
secs = mktime(&localTime);
if (secs != (time_t) -1)
{
#if defined(XP_MAC) && (__MSL__ < 0x6000)
/*
* The mktime() routine in MetroWerks MSL C
* Runtime library returns seconds since midnight,
* 1 Jan. 1900, not 1970 - in versions of MSL (Metrowerks Standard
* Library) prior to version 6. Only for older versions of
* MSL do we adjust the value of secs to the NSPR epoch
*/
secs -= ((365 * 70UL) + 17) * 24 * 60 * 60;
#endif
LL_I2L(*result, secs);
LL_I2L(usec_per_sec, PR_USEC_PER_SEC);
LL_MUL(*result, *result, usec_per_sec);
return PR_SUCCESS;
}
}
/* So mktime() can't handle this case. We assume the
zone_offset for the date we are parsing is the same as
the zone offset on 00:00:00 2 Jan 1970 GMT. */
secs = 86400;
(void) MT_safe_localtime(&secs, &localTime);
zone_offset = localTime.tm_min
+ 60 * localTime.tm_hour
+ 1440 * (localTime.tm_mday - 2);
}
/* Adjust the hours and minutes before handing them to
PR_ImplodeTime(). Note that it's ok for them to be <0 or >24/60
We adjust the time to GMT before going into PR_ImplodeTime().
The zone_offset represents the difference between the time
zone parsed and GMT
*/
tm.tm_hour -= (zone_offset / 60);
tm.tm_min -= (zone_offset % 60);
*result = PR_ImplodeTime(&tm);
return PR_SUCCESS;
}
/*
*******************************************************************
*******************************************************************
**
** OLD COMPATIBILITY FUNCTIONS
**
*******************************************************************
*******************************************************************
*/
/*
*-----------------------------------------------------------------------
*
* PR_FormatTime --
*
* Format a time value into a buffer. Same semantics as strftime().
*
*-----------------------------------------------------------------------
*/
PR_IMPLEMENT(PRUint32)
PR_FormatTime(char *buf, int buflen, const char *fmt, const PRExplodedTime *tm)
{
struct tm a;
a.tm_sec = tm->tm_sec;
a.tm_min = tm->tm_min;
a.tm_hour = tm->tm_hour;
a.tm_mday = tm->tm_mday;
a.tm_mon = tm->tm_month;
a.tm_wday = tm->tm_wday;
a.tm_year = tm->tm_year - 1900;
a.tm_yday = tm->tm_yday;
a.tm_isdst = tm->tm_params.tp_dst_offset ? 1 : 0;
/*
* On some platforms, for example SunOS 4, struct tm has two additional
* fields: tm_zone and tm_gmtoff.
*/
#if defined(SUNOS4) || (__GLIBC__ >= 2) || defined(XP_BEOS) \
|| defined(NETBSD) || defined(OPENBSD) || defined(FREEBSD) \
|| defined(DARWIN)
a.tm_zone = NULL;
a.tm_gmtoff = tm->tm_params.tp_gmt_offset + tm->tm_params.tp_dst_offset;
#endif
return strftime(buf, buflen, fmt, &a);
}
/*
* The following string arrays and macros are used by PR_FormatTimeUSEnglish().
*/
static const char* abbrevDays[] =
{
"Sun","Mon","Tue","Wed","Thu","Fri","Sat"
};
static const char* days[] =
{
"Sunday","Monday","Tuesday","Wednesday","Thursday","Friday","Saturday"
};
static const char* abbrevMonths[] =
{
"Jan", "Feb", "Mar", "Apr", "May", "Jun",
"Jul", "Aug", "Sep", "Oct", "Nov", "Dec"
};
static const char* months[] =
{
"January", "February", "March", "April", "May", "June",
"July", "August", "September", "October", "November", "December"
};
/*
* Add a single character to the given buffer, incrementing the buffer pointer
* and decrementing the buffer size. Return 0 on error.
*/
#define ADDCHAR( buf, bufSize, ch ) \
do \
{ \
if( bufSize < 1 ) \
{ \
*(--buf) = '\0'; \
return 0; \
} \
*buf++ = ch; \
bufSize--; \
} \
while(0)
/*
* Add a string to the given buffer, incrementing the buffer pointer
* and decrementing the buffer size appropriately. Return 0 on error.
*/
#define ADDSTR( buf, bufSize, str ) \
do \
{ \
PRUint32 strSize = strlen( str ); \
if( strSize > bufSize ) \
{ \
if( bufSize==0 ) \
*(--buf) = '\0'; \
else \
*buf = '\0'; \
return 0; \
} \
memcpy(buf, str, strSize); \
buf += strSize; \
bufSize -= strSize; \
} \
while(0)
/* Needed by PR_FormatTimeUSEnglish() */
static unsigned int pr_WeekOfYear(const PRExplodedTime* time,
unsigned int firstDayOfWeek);
/***********************************************************************************
*
* Description:
* This is a dumbed down version of strftime that will format the date in US
* English regardless of the setting of the global locale. This functionality is
* needed to write things like MIME headers which must always be in US English.
*
**********************************************************************************/
PR_IMPLEMENT(PRUint32)
PR_FormatTimeUSEnglish( char* buf, PRUint32 bufSize,
const char* format, const PRExplodedTime* time )
{
char* bufPtr = buf;
const char* fmtPtr;
char tmpBuf[ 40 ];
const int tmpBufSize = sizeof( tmpBuf );
for( fmtPtr=format; *fmtPtr != '\0'; fmtPtr++ )
{
if( *fmtPtr != '%' )
{
ADDCHAR( bufPtr, bufSize, *fmtPtr );
}
else
{
switch( *(++fmtPtr) )
{
case '%':
/* escaped '%' character */
ADDCHAR( bufPtr, bufSize, '%' );
break;
case 'a':
/* abbreviated weekday name */
ADDSTR( bufPtr, bufSize, abbrevDays[ time->tm_wday ] );
break;
case 'A':
/* full weekday name */
ADDSTR( bufPtr, bufSize, days[ time->tm_wday ] );
break;
case 'b':
/* abbreviated month name */
ADDSTR( bufPtr, bufSize, abbrevMonths[ time->tm_month ] );
break;
case 'B':
/* full month name */
ADDSTR(bufPtr, bufSize, months[ time->tm_month ] );
break;
case 'c':
/* Date and time. */
PR_FormatTimeUSEnglish( tmpBuf, tmpBufSize, "%a %b %d %H:%M:%S %Y", time );
ADDSTR( bufPtr, bufSize, tmpBuf );
break;
case 'd':
/* day of month ( 01 - 31 ) */
PR_snprintf(tmpBuf,tmpBufSize,"%.2ld",time->tm_mday );
ADDSTR( bufPtr, bufSize, tmpBuf );
break;
case 'H':
/* hour ( 00 - 23 ) */
PR_snprintf(tmpBuf,tmpBufSize,"%.2ld",time->tm_hour );
ADDSTR( bufPtr, bufSize, tmpBuf );
break;
case 'I':
/* hour ( 01 - 12 ) */
PR_snprintf(tmpBuf,tmpBufSize,"%.2ld",
(time->tm_hour%12) ? time->tm_hour%12 : (PRInt32) 12 );
ADDSTR( bufPtr, bufSize, tmpBuf );
break;
case 'j':
/* day number of year ( 001 - 366 ) */
PR_snprintf(tmpBuf,tmpBufSize,"%.3d",time->tm_yday + 1);
ADDSTR( bufPtr, bufSize, tmpBuf );
break;
case 'm':
/* month number ( 01 - 12 ) */
PR_snprintf(tmpBuf,tmpBufSize,"%.2ld",time->tm_month+1);
ADDSTR( bufPtr, bufSize, tmpBuf );
break;
case 'M':
/* minute ( 00 - 59 ) */
PR_snprintf(tmpBuf,tmpBufSize,"%.2ld",time->tm_min );
ADDSTR( bufPtr, bufSize, tmpBuf );
break;
case 'p':
/* locale's equivalent of either AM or PM */
ADDSTR( bufPtr, bufSize, (time->tm_hour<12)?"AM":"PM" );
break;
case 'S':
/* seconds ( 00 - 61 ), allows for leap seconds */
PR_snprintf(tmpBuf,tmpBufSize,"%.2ld",time->tm_sec );
ADDSTR( bufPtr, bufSize, tmpBuf );
break;
case 'U':
/* week number of year ( 00 - 53 ), Sunday is the first day of week 1 */
PR_snprintf(tmpBuf,tmpBufSize,"%.2d", pr_WeekOfYear( time, 0 ) );
ADDSTR( bufPtr, bufSize, tmpBuf );
break;
case 'w':
/* weekday number ( 0 - 6 ), Sunday = 0 */
PR_snprintf(tmpBuf,tmpBufSize,"%d",time->tm_wday );
ADDSTR( bufPtr, bufSize, tmpBuf );
break;
case 'W':
/* Week number of year ( 00 - 53 ), Monday is the first day of week 1 */
PR_snprintf(tmpBuf,tmpBufSize,"%.2d", pr_WeekOfYear( time, 1 ) );
ADDSTR( bufPtr, bufSize, tmpBuf );
break;
case 'x':
/* Date representation */
PR_FormatTimeUSEnglish( tmpBuf, tmpBufSize, "%m/%d/%y", time );
ADDSTR( bufPtr, bufSize, tmpBuf );
break;
case 'X':
/* Time representation. */
PR_FormatTimeUSEnglish( tmpBuf, tmpBufSize, "%H:%M:%S", time );
ADDSTR( bufPtr, bufSize, tmpBuf );
break;
case 'y':
/* year within century ( 00 - 99 ) */
PR_snprintf(tmpBuf,tmpBufSize,"%.2d",time->tm_year % 100 );
ADDSTR( bufPtr, bufSize, tmpBuf );
break;
case 'Y':
/* year as ccyy ( for example 1986 ) */
PR_snprintf(tmpBuf,tmpBufSize,"%.4d",time->tm_year );
ADDSTR( bufPtr, bufSize, tmpBuf );
break;
case 'Z':
/* Time zone name or no characters if no time zone exists.
* Since time zone name is supposed to be independant of locale, we
* defer to PR_FormatTime() for this option.
*/
PR_FormatTime( tmpBuf, tmpBufSize, "%Z", time );
ADDSTR( bufPtr, bufSize, tmpBuf );
break;
default:
/* Unknown format. Simply copy format into output buffer. */
ADDCHAR( bufPtr, bufSize, '%' );
ADDCHAR( bufPtr, bufSize, *fmtPtr );
break;
}
}
}
ADDCHAR( bufPtr, bufSize, '\0' );
return (PRUint32)(bufPtr - buf - 1);
}
/***********************************************************************************
*
* Description:
* Returns the week number of the year (0-53) for the given time. firstDayOfWeek
* is the day on which the week is considered to start (0=Sun, 1=Mon, ...).
* Week 1 starts the first time firstDayOfWeek occurs in the year. In other words,
* a partial week at the start of the year is considered week 0.
*
**********************************************************************************/
static unsigned int
pr_WeekOfYear(const PRExplodedTime* time, unsigned int firstDayOfWeek)
{
int dayOfWeek;
int dayOfYear;
/* Get the day of the year for the given time then adjust it to represent the
* first day of the week containing the given time.
*/
dayOfWeek = time->tm_wday - firstDayOfWeek;
if (dayOfWeek < 0)
dayOfWeek += 7;
dayOfYear = time->tm_yday - dayOfWeek;
if( dayOfYear <= 0 )
{
/* If dayOfYear is <= 0, it is in the first partial week of the year. */
return 0;
}
else
{
/* Count the number of full weeks ( dayOfYear / 7 ) then add a week if there
* are any days left over ( dayOfYear % 7 ). Because we are only counting to
* the first day of the week containing the given time, rather than to the
* actual day representing the given time, any days in week 0 will be "absorbed"
* as extra days in the given week.
*/
return (dayOfYear / 7) + ( (dayOfYear % 7) == 0 ? 0 : 1 );
}
}
Reference in New Issue View Git Blame Copy Permalink