32 lines
1.5 KiB
Markdown
32 lines
1.5 KiB
Markdown
|
|
# ratgdo
|
|
|
|
This is a port of the ratgdo software for the v2 board to esphome.
|
|
|
|
[Visit the github.io page to purchase boards](https://paulwieland.github.io/ratgdo/#order)
|
|
|
|
This project is not affiliated with ratgdo or Paul Wieland. Please buy his boards to support his excellent work.
|
|
|
|
## Moving from stock ratgdo
|
|
|
|
- Use the [`Logs & Console`](https://paulwieland.github.io/ratgdo/flash.html) to view and make note of the current rolling code
|
|
- Flash the new ESPHome based firmware using the [Web Installer](https://esphome-ratgdo.github.io/esphome-ratgdo/)
|
|
- Use the `number` entity in Home Assistant or the built-in ESPHome web-server to set the rolling code.
|
|
|
|
<img width="560" alt="number_entity" src="https://github.com/ESPHome-RATGDO/esphome-ratgdo/assets/663432/e177029e-f42f-46a8-a87a-81fa04caaa57">
|
|
|
|
# First use
|
|
|
|
The ESPHome firmware will allow you to open the door to any position after calibration. To calibrate the door, open and close it once without stopping.
|
|
|
|
<img width="560" alt="position_demo" src="https://github.com/ESPHome-RATGDO/esphome-ratgdo/assets/663432/22a9873e-67bb-4b2f-bb32-70047cfe666d">
|
|
|
|
|
|
# ESPHome config
|
|
|
|
- [ESPHome config for v2 board with ESP8266 D1 Mini lite](https://github.com/ESPHome-RATGDO/esphome-ratgdo/blob/main/static/v2board_esp8266_d1_mini_lite.yaml)
|
|
- [ESPHome config for v2 board with ESP32 D1 Mini](https://github.com/ESPHome-RATGDO/esphome-ratgdo/blob/main/static/v2board_esp32_d1_mini.yaml)
|
|
- [Web Installer](https://esphome-ratgdo.github.io/esphome-ratgdo/)
|
|
|
|
|