feature.conf has a disconnect option. By default this option is set to '*', but it could be anything. If a user wishes to disconnect a call before the other side answers, only '*' will work, regardless if the disconnect option is set to something else. This is because features are unavailable until bridging takes place. The default disconnect option, '*', was hardcoded in app_dial, which doesn't make any sense from a user perspective since they may expect it to be something different. This patch allows features to be detected from outside of the bridge, but not operated on. In this case, the disconnect feature can be detected before briding and handled outside of features.c.
(closes issue #11583)
Reported by: sobomax
Patches:
patch-apps__app_dial.c uploaded by sobomax (license 359)
11583.latest-patch uploaded by murf (license 17)
detect_disconnect.diff uploaded by dvossel (license 671)
Tested by: sobomax, dvossel
Review: http://reviewboard.digium.com/r/195/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@183126 65c4cc65-6c06-0410-ace0-fbb531ad65f3
A user was having an issue where if an outgoing SIP call was canceled, the SIP device
would remain in use if we had not received any response to the initial INVITE we sent out.
The SIP device would remain in use until the autocongestion timer was exhausted.
I tracked down the cause of this to be the section of code I am removing here. I asked several
people what the purpose of this code was meant to be, but no one could give me any sort of
answer as to why this was here. The person who was having this issue has been using this patch
for several months and it has stopped the problems they have had.
AST-196
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@183115 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Chan_h323 can now be compiled against both the previously supported versions of
OpenH323 as well as the current H.323 Plus (version 1.20.2). The configure
script has been modified to look in the default install location of h323 to
hopefully help avoid using the environment variables OPENH323DIR and PWLIBDIR.
Also, the CLI command "h323 show version" has been added which indicates which
version of h323 is in use.
(closes issue 0011261)
Reported by: vhatz
Patches:
asterisk-1.6.0.6-h323plus.patch uploaded by jthurman (license 614)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@182963 65c4cc65-6c06-0410-ace0-fbb531ad65f3
We have seen a number of problems caused by poll() not working properly on
Mac OSX. If you search around, you'll find a number of references to using
select() instead of poll() to work around these issues. In Asterisk, we've
had poll.c which implements poll() using select() internally. However, we
were still getting reports of problems.
vadim investigated a bit and realized that at least on his system, even
though we were compiling in poll.o, the system poll() was still being used.
So, the primary purpose of this patch is to ensure that we're using the
internal poll() when we want it to be used.
The changes are:
1) Remove logic for when internal poll should be used from the Makefile.
Instead, put it in the configure script. The logic in the configure
script is the same as it was in the Makefile. Ideally, we would have
a functionality test for the problem, but that's not actually possible,
since we would have to be able to run an application on the _target_
system to test poll() behavior.
2) Always include poll.o in the build, but it will be empty if AST_POLL_COMPAT
is not defined.
3) Change uses of poll() throughout the source tree to ast_poll(). I feel
that it is good practice to give the API call a new name when we are
changing its behavior and not using the system version directly in all cases.
So, normally, ast_poll() is just redefined to poll(). On systems where
AST_POLL_COMPAT is defined, ast_poll() is redefined to ast_internal_poll().
4) Change poll() in main/poll.c to be ast_internal_poll().
It's worth noting that any code that still uses poll() directly will work fine
(if they worked fine before). So, for example, out of tree modules that are
using poll() will not stop working or anything. However, for modules to work
properly on Mac OSX, ast_poll() needs to be used.
(closes issue #13404)
Reported by: agalbraith
Tested by: russell, vadim
http://reviewboard.digium.com/r/198/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@182810 65c4cc65-6c06-0410-ace0-fbb531ad65f3
With these changes, for a module to export symbols into the global namespace, it must have *both* the AST_MODFLAG_GLOBAL_SYMBOLS flag and a linker script that allows the linker to leave the symbols exposed in the module's .so file (see res_odbc.exports for an example).
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@182808 65c4cc65-6c06-0410-ace0-fbb531ad65f3
With these changes, for a module to export symbols into the global namespace, it must have *both* the AST_MODFLAG_GLOBAL_SYMBOLS flag and a linker script that allows the linker to leave the symbols exposed in the module's .so file (see res_odbc.exports for an example).
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@182802 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The underlying db1 implementation does not fully isolate the pages retrieved
from astdb, so the lock protecting accesses needs to be extended until the
copy from the shared memory structure is done.
(closes issue #14682)
Reported by: makoto
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@182449 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The 16-32 byte random padding at the beginning of an encrypted IAX2 frame turns out to not be all that random at all. This patch calls ast_random to fill the padding buffer with random data. The padding is randomized at the beginning of every encrypted call and for every encrypted retransmit frame.
Review: http://reviewboard.digium.com/r/193/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@182281 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Dynamic features defined in the applicationmap section of features.conf allow
one to specify whether the caller, callee, or both have the ability to use the
feature. The documentation in the features.conf.sample file could be interpreted
to mean that one only needs to set the DYNAMIC_FEATURES channel variable on the
calling channel in order to allow for the callee to be able to use the features
which he should have permission to use. However, the DYNAMIC_FEATURES variable
would only be read from the channel of the participant that pressed the DTMF
sequence to activate the feature. The result of this was that the callee was
unable to use dynamic features unless the dialplan writer had taken measures
to be sure that the DYNAMIC_FEATURES variable was set on the callee's channel.
This commit changes the behavior of ast_feature_interpret to concatenate the
values of DYNAMIC_FEATURES from both parties involved in the bridge. The features
themselves determine who has permission to use them, so there is no reason to believe
that one side of the bridge could gain the ability to perform an action that they
should not have the ability to perform.
Kevin Fleming pointed out on the asterisk-users list that the typical way that this
was worked around in the past was by setting _DYNAMIC_FEATURES on the calling channel
so that the value would be inherited by the called channel. While this works, the
documentation alone is not enough to figure out why this is necessary for the callee
to be able to use dynamic features. In this particular case, changing the code to match
the documentation is safe, easy, and will generally make things easier for people for
future installations.
This bug was originally reported on the asterisk-users list by David Ruggles.
(closes issue #14657)
Reported by: mmichelson
Patches:
14657.patch uploaded by mmichelson (license 60)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@181990 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If we receive an INVITE from an endpoint and then later receive a BYE from that
same endpoint before we have sent a final response for the INVITE, then we need
to respond to the INVITE with a 487.
There was logic in the code prior to this commit which seemed to exist solely to
handle this situation, but there was one condition in an if statement which
was incorrect. The only way we would send a 487 was if the sip_pvt had no owner
channel. This made no sense since we created the owner channel when we received
the INVITE, meaning that the majority of the time we would never send the 487.
The 487 being sent should not rely on whether we have created a channel. Its
delivery should be dependent on the current state of the initial INVITE transaction.
With this commit, that logic is now correctly in place.
(closes issue #14149)
Reported by: legranjl
Patches:
14149.patch uploaded by mmichelson (license 60)
Tested by: legranjl
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@181768 65c4cc65-6c06-0410-ace0-fbb531ad65f3
For custom commands we don't know whether the audio is coming from a stream or not
so we are going to have to read the data despite no channels.
(closes issue #14416)
Reported by: caspy
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@181659 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When a music class is setup to actually provide music on hold
from a stream we need to constantly read audio from it since it
will constantly be providing audio. This is now done despite there
being no channels listening to it.
(closes issue #14416)
Reported by: caspy
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@181655 65c4cc65-6c06-0410-ace0-fbb531ad65f3
It is not safe to read the name field of an ast_channel without the channel
locked. This patch fixes some places in channel.c where this was being done,
and lead to crashes related to masquerades.
(closes issue #14623)
Reported by: guillecabeza
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@181423 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If an iax channel is encrypted, and a retransmit frame is sent, that packet's iseqno is updated while it is encrypted. This causes the entire frame to be corrupted. When the corrupted frame is sent, the other side decrypts it and sends a VNAK back because the decrypted frame doesn't make any sense. When we get the VNAK, we look through the sent queue and send the same corrupted frame causing a loop. To fix this, encrypted frames requiring retransmission are decrypted, updated, then re-encrypted. Since key-rotation may change the key held by the pvt struct, the keys used for encryption/decryption are held within the iax_frame to guarantee they remain correct.
(closes issue #14607)
Reported by: stevenla
Tested by: dvossel
Review: http://reviewboard.digium.com/r/192/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@181340 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When completing an attended transfer chan_sip does a check to make sure the extension
in the URI portion of the Refer-To header is a local valid extension. We don't actually
need to check this since we know for sure the other channel is already up and talking to
the extension. Some devices do not put the extension in the Refer-To header either, which
can cause the extension check to fail. We now no longer do this check if it is an attended
transfer.
(closes issue #14628)
Reported by: sverre
Patches:
14628.diff uploaded by file (license 11)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@181328 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When dtmfmode was set to auto the inband DTMF detector was not setup
on outgoing SIP calls. This caused inband DTMF detection to fail.
The inband DTMF detector is now setup for both dtmfmode inband and auto.
(closes issue #13713)
Reported by: makoto
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@181295 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The main problem here was that cstdlib was undefining free thereby causing the
proper debug macros to not be used. ast_h323.cxx has been changed to call
ast_free instead to avoid the issue. Because using the ast prefix calls are
a better choice, ast_free_ptr is the new wrapper for free to pass to functions.
Also, a little bit of clean up was done to avoid the debug macros intentionally
being redefined.
(closes issue #13593)
Reported by: pj
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@181133 65c4cc65-6c06-0410-ace0-fbb531ad65f3
enum.c did not handle regex backtraces correctly. The '\1' in the regex is a backreference that requires a pattern match to be inserted. The way the code used to work is that it would find the backreference and insert the entire input string minus the '+'. This is incorrect. The regexec() function takes in a variable called pmatch which is an array of structs containing the start and end indexes for each backreference substring. The original code actually passed the pmatch array pointer into regexec but never did anything with it. Now when a backtrace is found, the backtrace number is looked up in the pmatch array and the correct substring is inserted.
(closes issue #14576)
Reported by: chris-mac
Review: http://reviewboard.digium.com/r/187/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@180532 65c4cc65-6c06-0410-ace0-fbb531ad65f3
There was a fix put in a while back so that an X-Asterisk-VM-Context message header was
added to stored IMAP voicemails. This would allow for us to differentiate if the same
mailbox name was used in multiple contexts. The problem still left was that not all places
where messages were retrieved actually attempted to use this header for information when
retrieving messages. This commit fixes that so that MWI and message retrieval from VoiceMailMain
work as expected.
(closes issue #13853)
Reported by: vicks1
Patches:
13853_v2.patch uploaded by mmichelson (license 60)
Tested by: lmadsen
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@180464 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When using the searchcontexts option in voicemail.conf, the code
made the assumption that all mailbox names defined were unique across
all contexts. However, the code did nothing to actually enforce this
assumption, nor did it do anything to alert a user that he may have
created an ambiguity in his voicemail.conf file by defining the same
mailbox name in multiple contexts.
With this change, we now will issue a nice long warning if searchcontexts
is on and we encounter the same mailbox name in multiple contexts and ignore
any duplicates after the first box. Whether searchcontexts is enabled or not,
if we come across a duplicate mailbox in the same context, then we will issue
a warning and ignore the duplicated mailbox. I have also added a small note
to voicemail.conf.sample in the explanation for searchcontexts explaining
that you cannot define the same mailbox in multiple contexts if you have
enabled the option.
(closes issue #14599)
Reported by: lmadsen
Patches:
14599.patch uploaded by mmichelson (license 60) (with slight modification)
Tested by: lmadsen
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@180380 65c4cc65-6c06-0410-ace0-fbb531ad65f3
During some code analysis, I found that calling ast_rtp_codec_setpref() on an ast_rtp session does not work as expected; it does not adjust the smoother that may on the RTP session, in fact it summarily drops it, even if it has data in it, even if the current format's framing size has not changed. This is not good.
This patch changes this behavior, so that if the packetization size for the current format changes, any existing smoother is safely updated to use the new size, and if no smoother was present, one is created. A new API call for smoothers, ast_smoother_reconfigure(), was required to implement these changes.
Review: http://reviewboard.digium.com/r/184/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@180372 65c4cc65-6c06-0410-ace0-fbb531ad65f3
It had always been possible to explicitly specify a "blank"
value for a sound file in queues.conf and have no sound played
back. The problem with this is that it would result in some ugly
CLI warnings from file.c.
This commit introduces a check when playing a file in app_queue
to see if the name of the file is zero-length and return early if
that is the case. Also, the ability to specify the blank sound
files in queues.conf is now mentioned more clearly in queues.conf.sample
(closes issue #14227)
Reported by: caspy
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@180006 65c4cc65-6c06-0410-ace0-fbb531ad65f3
It is possible for a masquerade operation to occur when the 'h' exten is operating. This operation moves
the CDR records around causing the bridge_cdr to no longer exist on the channel where it is expected to.
We can not safely modify it afterwards because of this, so don't even try.
(closes issue #14564)
Reported by: meric
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@179840 65c4cc65-6c06-0410-ace0-fbb531ad65f3
I modified and added rules in ast_expr2.fl to better handle
the concatenations.
I added some default routines to ast_expr2.y so the standalone would
compile. It also looks like I haven't run this thru bison since 2.1, so
it's good to get this updated.
The Makefile has comments added now for check_expr2 and check_expr to
explain what they are for, and how to run them.
The testexpr2s stuff has been removed, in favor of check_expr2.
expr2.testinput has been updated to include the two expressions
that inspired these changes (from mcnobody on #asterisk this morning)
The regression has been run and all looks well.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@179807 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Since setting fdno to -1 had to be moved, a couple of other code paths that
do process an fd event return early and do not pass through the code path
where it was moved to. So, set it to -1 in a few other places, too.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@179741 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When you call ast_waitfor() on a channel, the index into the channel fds array
that holds the file descriptor that poll() determines has input available is
stored in fdno. This patch clears out this value after a call to ast_read()
and also reports errors if ast_read() is called without an fdno set.
From a discussion on the asterisk-dev list.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@179608 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This fixes a bad regression where the bridge would exit after an attended
transfer was made. The problem was due to nexteventts getting set after the
masquerade which caused the bridge to return AST_BRIDGE_COMPLETE.
(closes issue #14315)
Reported by: tim_ringenbach
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@179536 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This call to ast_waitfor() was being done way too soon in this section of code.
Specifically, there was code in between the call to waitfor and the code that
uses the result that puts the channel in autoservice. By putting the channel
in autoservice, the previous results of ast_waitfor() become meaningless,
as the autoservice thread will do it's own ast_waitfor() and ast_read()
on the channel.
So, when we came back out of autoservice and eventually hit the block of code
that calls ast_read() on the channel, there may not actually be any input on
the channel available. Even though the previous call to ast_waitfor() in
app_meetme said there was input, the autoservice thread has since serviced
the channel for some period of time.
This bug manifested itself while dvossel was doing some testing of MeetMe in
Asterisk trunk. He was using the timerfd timing module. When the code hit
ast_read() erroneously, it determined that it must have been called because of
input on the timer fd, as chan->fdno was set to AST_TIMING_FD, since that was
the cause of the last legitimate call to ast_read() done by autoservice.
In this test, an IAX2 channel was calling into the MeetMe conference. It was
_much_ more likely to be seen with an IAX2 channel because of the way audio
is handled. Every audio frame that comes in results in a call to
ast_queue_frame(), which then uses ast_timer_enable_continuous() to notify
the channel thread that a frame is waiting to be handled. So, the chances
of ast_waitfor() indicating that a channel needs servicing due to a timer
event on an IAX2 event is very high.
Finally, it is interesting to note that if a different timing interface was
being used, this bug would probably not be noticed. When ast_read() is called
and erroneously thinks that there is a timer event to handle, it calls the
ast_timer_ack() function. The pthread and dahdi timing modules handle the
ack() function being called when there is no event by simply ignoring it.
In the case of the timerfd module, it results in a read() on the timer fd
that will block forever, as there is no data to read. This caused Asterisk
to lock up very quickly.
Thanks to dvossel and mmichelson for the fun debugging session. :-)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@179532 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The end of the recording is correspondingly trimmed, but the duration was not
trimmed by the number of seconds trimmed, so the saved duration was necessarily
longer than the actual soundfile duration.
(closes issue #14406)
Reported by: sasargen
Patches:
20090226__bug14406.diff.txt uploaded by tilghman (license 14)
Tested by: sasargen
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@179468 65c4cc65-6c06-0410-ace0-fbb531ad65f3
For example, with an IAX2 channel, you can have both the channel thread and the
chan_iax2 processing threads calling this function, and doing so twice at the
same time is a bad thing.
(Found in a debugging session with dvossel and mmichelson)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@179461 65c4cc65-6c06-0410-ace0-fbb531ad65f3
