We need to make sure that we don't start writing audio to the trunk channel until we're
actually ready to answer it. Otherwise, the channel driver will treat it as inband
progress, even though all they are getting is silence.
(closes issue #12471)
Reported by: mthomasslo
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@162286 65c4cc65-6c06-0410-ace0-fbb531ad65f3
that ast_call() fails. For incoming SIP channels, this was causing
us to send a 603 instead of a 486 when the call-limit was reached on
the destination channel.
(closes issue #13867)
Reported by: still_nsk
Patches:
13867.diff uploaded by putnopvut (license 60)
Tested by: blitzrage
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@158053 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Reported by: akkornel
This fix is the result of a bug fix in ast_app_separate_args r124395. If an argument does not exist it should always be set to a null string rather than a null pointer.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@157365 65c4cc65-6c06-0410-ace0-fbb531ad65f3
app_followme which would occur at the end of an attended
transfer. The error occurred because we initially stored
a pointer to an ast_channel which then was hung up due
to a masquerade.
This commit adds a "fixup" callback to the bridge_config
structure to allow for end_bridge_callback_data to be
changed in the case that a new channel pointer is needed
for the end_bridge_callback.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@157305 65c4cc65-6c06-0410-ace0-fbb531ad65f3
resulted in the password not being saved, even if the input matched
what you gave when first prompted to enter a new password. This is
because the return value of ast_readstring was checked, but not checked
properly.
This bug was discovered by Jared Smith during an Asterisk training course.
Thanks for reporting it!
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@156816 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Reported by: pep
This change adds an announce_thread responsible for playing announcements to an existing conference. This allows all announcing to be immediately stopped if necessary but more importantly allows other threads that need to play something to not block. There are multiple benefits to this, but the actual bug is for solving the scenario for a channel to be unusable after hang up for the entire duration of the parting announcement. The parting announcement can be extremely long depending on what the user recorded upon joining the conference.
Reviewed by Russell on Review Board:
http://reviewboard.digium.com/r/25/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@156178 65c4cc65-6c06-0410-ace0-fbb531ad65f3
if an attended transfer occurred during the call. I traced the cause to
the CDR on one of the channels being NULL. murf suggested a check in
the end bridge callback to be sure the CDR is non-NULL before proceeding,
so that's what I'm adding.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@156167 65c4cc65-6c06-0410-ace0-fbb531ad65f3
dial and queue... I wasted some time (stupidly) trying
to get the one-touch parking stuff working, because it
didn't occur to me that I had to also have the corresponding
options in the dial command! Duh! (In all this time, I never
set this up before!)
So, to keep some poor fool from suffering the same fate,
I made the features.conf.sample file mention the corresponding
opts in dial/queue; and the docs for dial/app specifically
mention the corresponding decls in the feature.conf file.
I hope this doesn't spoil some vast, eternal plan...
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@152538 65c4cc65-6c06-0410-ace0-fbb531ad65f3
try to find the channel by name in the list,
which is slow and resource consuming, but rather
to pay attention to the result codes from the
ast_bridge_call, to which I added the
AST_PBX_NO_HANGUP_PEER_PARKED value, which
now are returned when a channel is parked.
If you get AST_PBX_KEEPALIVE,
then don't touch the channel pointer.
If you get AST_PBX_NO_HANGUP_PEER, or
AST_PBX_NO_HANGUP_PEER_PARKED, then don't
touch the peer pointer.
Updated the several places where the results
from a bridge were not being properly obeyed,
and fixed some code I had introduced so that
the results of the bridge were not overridden
(in trunk).
All the places that previously tested for
AST_PBX_NO_HANGUP_PEER now have to check for
both AST_PBX_NO_HANGUP_PEER and AST_PBX_NO_HANGUP_PEER_PARKED.
I tested this against the 4 common parking
scenarios:
1. A calls B; B answers; A parks B; B hangs up while A is getting the parking
slot announcement, immediately after being put on hold.
2. A calls B; B answers; A parks B; B hangs up after A has been hung up, but
before the park times out.
3. A calls B; B answers; B parks A; A hangs up while B is getting the parking slot announcement, immediately after being put on hold.
4. A calls B; B answers; B parks A; A hangs up after B has been hung up, but before the park times out.
No crash.
I also ran the scenarios above against valgrind, and accesses looked good.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@152535 65c4cc65-6c06-0410-ace0-fbb531ad65f3
per call (which could otherwise lead to inconsistent status reports).
(closes issue #13216)
Reported by: ruddy
Patches:
20081014__bug13216.diff.txt uploaded by Corydon76 (license 14)
Tested by: ruddy
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@152368 65c4cc65-6c06-0410-ace0-fbb531ad65f3
whether the call was completed within the service level
when a transfer takes place. This way, we do not "break"
the leastrecent and fewestcalls strategies by not logging
a call until after the transferred call has ended.
(closes issue #13395)
Reported by: Marquis
Patches:
app_queue.c.transfer.patch uploaded by Marquis (license 32)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@149200 65c4cc65-6c06-0410-ace0-fbb531ad65f3
workspace. To signal an error (and no change to the workspace), -1 should be
returned instead.
(closes issue #13340)
Reported by: kryptolus
Patches:
20080827__bug13340__2.diff.txt uploaded by Corydon76 (license 14)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@146799 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This is a "second attempt" to restore the previous "endbeforeh" behavior
in 1.4 and up. In order to capture information concerning all the
legs of transfers in all their infinite combinations, I was forced
to this particular solution by a chain of logical necessities, the
first being that I was not allowed to rewrite the CDR mechanism from
the ground up!
This change basically leaves the original machinery alone, which allows
IVR and local channel type situations to generate CDR's as normal, but
a channel flag can be set to suppress the normal running of the h exten.
That flag would be set by the code that runs the h exten from the
ast_bridge_call routine, to prevent the h exten from being run twice.
Also, a flag in the ast_bridge_config struct passed into ast_bridge_call
can be used to suppress the running of the h exten in that routine. This
would happen, for instance, if you use the 'g' option in the Dial app.
Running this routine 'early' allows not only the CDR() func to be used
in the h extension for reading CDR variables, but also allows them to
be modified before the CDR is posted to the backends.
While I dearly hope that this patch overcomes all problems, and
introduces no new problems, reality suggests that surely someone
will have problems. In this case, please re-open 13251 (or 13289),
and we'll see if we can't fix any remaining issues.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@142675 65c4cc65-6c06-0410-ace0-fbb531ad65f3
not be DISPOSE'ing of them the same way we do with
other messages.
(closes issue #13414)
Reported by: mthomasslo
Patches:
13414v2.patch uploaded by putnopvut (license 60)
Tested by: mthomasslo
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@141267 65c4cc65-6c06-0410-ace0-fbb531ad65f3
something a bit strange. In all cases where we provide
a callback function to ao2_container_alloc, the callback
function would only return 0 or CMP_MATCH. After inspecting
the ao2_callback() code carefully, I found that if you're
only looking for one specific item, then you should return
CMP_MATCH | CMP_STOP. Otherwise, astobj2 will continue
traversing the current bucket until the end searching for
more matches.
In cases like chan_iax2 where in 1.4, all the peers are
shoved into a single bucket, this makes for potentially
terrible performance since the entire bucket will be
traversed even if the peer is one of the first ones come
across in the bucket.
All the changes I have made were for cases where the
callback function defined was passed to ao2_container_alloc
so that calls to ao2_find could find a unique instance
of whatever object was being stored in the container.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@140488 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This was causing a problem for people who had identically
named mailboxes in separate voicemail contexts.
This commit affects IMAP storage only.
(closes issue #13194)
Reported by: moliveras
Patches:
13194.patch uploaded by putnopvut (license 60)
Tested by: putnopvut, moliveras
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@140421 65c4cc65-6c06-0410-ace0-fbb531ad65f3
ChanSpy and specify a spy group, and sit in the application long enough looping
through the channel list, you will eventually run out of stack space and the
application with exit with a seg fault. The backtrace was always inside of
a harmless snprintf() call, so it was tricky to track down. However, it turned
out that the call to snprintf() was just the biggest stack consumer in this
code path, so it would always be the first one to hit the boundary.
(closes issue #13338)
Reported by: ruddy
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@139213 65c4cc65-6c06-0410-ace0-fbb531ad65f3
