starts, then don't give up on poking peers. Allow the poke to get rescheduled
so that it will work once the dnsmgr is able to resolve the host.
(closes issue #10521, patch by jamesgolovich)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@80849 65c4cc65-6c06-0410-ace0-fbb531ad65f3
issues. Previously, this code used a shift register of hits and non-hits.
However, if the start of the digit isn't clean, it is possible for the
leading edge detector to miss the digit. These changes replace the flawed
shift register logic and also does the debouncing on the trailing edge as well.
(closes issue #10535, many thanks to softins for the patch)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@80820 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Googletalk calls are answered too early, which results in CDRs wrongly
stating that a call was ANSWERED when the calling party cancelled a
call before before being established.
We must not answer the call upon reception of a 'transport-accept' iq
packet, but this packet still needs to be acknowledged, otherwise the
remote peer would close the call (like in #8970).
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@80661 65c4cc65-6c06-0410-ace0-fbb531ad65f3
after we already looked it up by name. This causes broken behavior if there is
more than one feature defined with the same digit pattern.
(closes issue #10539, reported by bungalow, patch by me)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@80573 65c4cc65-6c06-0410-ace0-fbb531ad65f3
the peers and users are being stored in a linked list, that they go in the
list in the same order that the older code used. This is necessary to maintain
the behavior of which peers and users get matched when traversing the container.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@80497 65c4cc65-6c06-0410-ace0-fbb531ad65f3
implies that is possible to miss an object or see an object twice while
iterating. After looking through the code and talking with mmichelson, I have
documented the exact conditions under which this can happen (which are rare and
harmless in most cases).
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@80426 65c4cc65-6c06-0410-ace0-fbb531ad65f3
added to the head of a bucket instead of the tail. However, while looking over
code with mmichelson, we noticed that the algorithm used in ao2_iterator_next
requires that items are added to the tail. This wouldn't have caused any huge
problem, but it wasn't correct. It meant that if an object was added to a
container while you were iterating it, and it was added to the same bucket that
the current element is in, then the new object would be returned by
ao2_iterator_next, and any other objects in the bucket would be bypassed in
the traversal.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@80424 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This set of changes fixes problems with the handling of iax2_user and iax2_peer
objects. It was very possible for a thread to still hold a reference to one of
these objects while a reload operation tries to delete them. The fix here is to
ensure that all references to these objects are tracked so that they can't go away
while still in use.
To accomplish this, I used the astobj2 reference counted object model. This
code has been in one of Luigi Rizzo's branches for a long time and was primarily
developed by one of his students, Marta Carbone. I wanted to go ahead and bring
this in to 1.4 because there are other problems similar to the ones fixed by these
changes, so we might as well go ahead and use the new astobj if we're going to go
through all of the work necessary to fix the problems.
As a nice side benefit of these changes, peer and user handling got more efficient.
Using astobj2 lets us not hold the container lock for peers or users nearly as long
while iterating. Also, by changing a define at the top of chan_iax2.c, the objects
will be distributed in a hash table, drastically increasing lookup speed in these
containers, which will have a very big impact on systems that have a large number of
users or peers.
The use of the hash table will be made the default in trunk. It is not the default
in 1.4 because it changes the behavior slightly. Previously, since peers and users
were stored in memory in the same order they were specified in the configuration file,
you could influence peer and user matching order based on the order they are specified
in the configuration. The hash table does not guarantee any order in the container,
so this behavior will be going away. It just means that you have to be a little
more careful ensuring that peers and users are matched explicitly and not forcing
chan_iax2 to have to guess which user is the right one based on secret, host, and
access list settings, instead of simply using the username.
If you have any questions, feel free to ask on the asterisk-dev list.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@80362 65c4cc65-6c06-0410-ace0-fbb531ad65f3
without reading the whole line when using fastagi. When this happens,
errno was set to EINTR or EAGAIN. This patch accounts for the possibility
and lets fgets continue in that case.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@80360 65c4cc65-6c06-0410-ace0-fbb531ad65f3
limit on how many history entires will be stored for each SIP dialog. It is
currently set to 50, but can be increased if deemed necessary.
(closes issue #10421, closes issue #10418, patches suggested by jmoldenhauer,
patches updated by me)
(Security implications documented in AST-2007-020)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@80183 65c4cc65-6c06-0410-ace0-fbb531ad65f3
ast_read to return NULL in the case that the channel has been hung up.
(crash reported by anonymouz666 on IRC in #asterisk-dev)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@79912 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If a retrieval of a greeting from the database fails, but the file is found on the file system, then
we go ahead an insert the greeting into the database. The result of this is that people who
switch from file storage to ODBC storage do not need to rerecord their voicemail greetings.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@79906 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Caused by fix for issue 9938.
I basically took the code that existed before 9938 was fixed, and
copied it into a new function - ast_unescape_semicolon
There should be very few places this will be needed (pbx_config
does NOT need this (see issue 9938 for details))
Issue 10430, patch by me, with help/ideas from murf (thanks murf).
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@79904 65c4cc65-6c06-0410-ace0-fbb531ad65f3
to the scheduler to ensure that they don't overwrite the ID of a previously
scheduled item. If there is one, it should be removed.
(closes issue #10391, closes issue #10256, probably others, patch by me)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@79857 65c4cc65-6c06-0410-ace0-fbb531ad65f3
