to see what would happen. It passed the compile test, and I didn't notice I had
left this change in too.
So this is a revert of a revert...sort of.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@110635 65c4cc65-6c06-0410-ace0-fbb531ad65f3
was not for an actual bug fix per se, and so it really should not have been in 1.4 in
the first place. Plus, people who compile with DO_CRASH are more likely
to encounter a crash due to this change. While I think the usage of DO_CRASH
in ast_sched_del is a bit absurd, this sort of change is beyond the scope of 1.4
and should be done instead in a developer branch based on trunk
so that all scheduler functions are fixed at once.
I also am reverting the change to trunk and 1.6 since they also suffer from
the DO_CRASH potential.
(closes issue #12272)
Reported by: qq12345
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@110618 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This really should not make a difference except in very rare cases. That case would
be that all of the channels in autoservice are not generating any frames. In that
case, this change reduces the potential amount of time that a thread waits in
ast_autoservice_stop() for the autoservice thread to wrap back around to the beginning
of its loop.
(closes issue #12266, reported by dimas)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@110395 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.2
........
r110335 | russell | 2008-03-20 16:53:27 -0500 (Thu, 20 Mar 2008) | 6 lines
Fix some very broken code that was introduced in 1.2.26 as a part of the security
fix. The dnsmgr is not appropriate here. The dnsmgr takes a pointer to an address
structure that a background thread continuously updates. However, in these cases,
a stack variable was passed. That means that the dnsmgr thread would be continuously
writing to bogus memory.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@110336 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Reported by: tzafrir
Patches:
11442.patch uploaded by murf (license 17)
Tested by: murf
I didn't give tzafrir very much time to test this, but if he does
still have remaining issues, he is welcome to
re-open this bug, and we'll do what is called for.
I reproduced the problem, and tested the fix, so I hope I
am not jumping by just going ahead and committing the fix.
The problem was with what file_save does with templates;
firstly, it tended to print out multiple options:
[my_category](!)(templateref)
instead of
[my_category](!,templateref)
which is fixed by this patch.
Nextly, the code to suppress output of duplicate declarations
that would occur because the reader copies inherited declarations
down the hierarchy, was not working. Thus:
[master-template](!)
mastervar = bar
[template](!,master-template)
tvar = value
[cat](template)
catvar = val
would be rewritten as:
;!
;! Automatically generated configuration file
;! Filename: experiment.conf (/etc/asterisk/experiment.conf)
;! Generator: Manager
;! Creation Date: Tue Mar 18 23:17:46 2008
;!
[master-template](!)
mastervar = bar
[template](!,master-template)
mastervar = bar
tvar = value
[cat](template)
mastervar = bar
tvar = value
catvar = val
This has been fixed. Since the config reader 'explodes' inherited
vars into the category, users may, in certain circumstances, see
output different from what they originally entered, but it should
be both correct and equivalent.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@109908 65c4cc65-6c06-0410-ace0-fbb531ad65f3
code. This removes several problems people were seeing where their queue members would get into
an "unknown" state. Huge props go to atis on this one since he was the one who found the code
section that was causing the problem and proposed the solution. I just wrote what he suggested :)
(closes issue #12127)
Reported by: atis
Patches:
12127v3.patch uploaded by putnopvut (license 60)
Tested by: atis, jvandal
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@109713 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Reported by: atis
Many thanks to atis for spotting this problem and reporting it.
The fix was to straighten out how items are placed on and removed
from the file stack. Regressions as well as the provided test case
helped to straighten out all code paths. valgrind was used to make
sure all memory allocated was freed.
Sorry for not solving this earlier. I got distracted.
Added the ntest23 regression test, which is mainly a copy of ntest22,
but with a few juicy errors thrown in, to replicate the kind of
error that atis spotted.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@109309 65c4cc65-6c06-0410-ace0-fbb531ad65f3
via the "core show locks" command. The idea behind this section of code was
to remove the previous lock from the list if it was a trylock that had failed.
Unfortunately, instead of checking the status of the previous lock, we were referencing
the index immediately following the previous lock in the lock_info->locks array.
The result of this problem, under the right circumstances, was that the lock which
we currently in the process of attempting to acquire could "overwrite" the previous lock
which was acquired. While this does not in any way affect typical operation, it *could*
lead to misleading "core show locks" output.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@109226 65c4cc65-6c06-0410-ace0-fbb531ad65f3
when dialing a channel that does not provide progress (analog ZAP lines)
The phone does handle the double update on calls to channels that do
provide progress and wont insert duplicate items
(closes issue #12239)
Reported by: DEA
Patches:
chan_skinny-call-log.txt uploaded by DEA (license 3)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@109171 65c4cc65-6c06-0410-ace0-fbb531ad65f3
chan_sip uses the scheduler API in order to schedule retransmission of reliable
packets (such as INVITES). If a retransmission of a packet is occurring, then the
packet is removed from the scheduler and retrans_pkt is called. Meanwhile, if
a response is received from the packet as previously transmitted, then when we
ACK the response, we will remove the packet from the scheduler and free the packet.
The problem is that both the ACK function and retrans_pkt attempt to acquire the
same lock at the beginning of the function call. This means that if the ACK function
acquires the lock first, then it will free the packet which retrans_pkt is about to
read from and write to. The result is a crash.
The solution:
1. If the ACK function fails to remove the packet from the scheduler and the retransmit
id of the packet is not -1 (meaning that we have not reached the maximum number of
retransmissions) then release the lock and yield so that retrans_pkt may acquire the
lock and operate.
2. Make absolutely certain that the ACK function does not recursively lock the lock in
question. If it does, then releasing the lock will do no good, since retrans_pkt will
still be unable to acquire the lock.
(closes issue #12098)
Reported by: wegbert
(closes issue #12089)
Reported by: PTorres
Patches:
12098-putnopvutv3.patch uploaded by putnopvut (license 60)
Tested by: jvandal
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@108737 65c4cc65-6c06-0410-ace0-fbb531ad65f3
datastore callback, called chan_fixup(). The concept is exactly like the
fixup callback that is used in the channel technology interface. This callback
gets called when the owning channel changes due to a masquerade. Before this
was introduced, if a masquerade happened on a channel being spyed on, the
channel pointer in the datastore became invalid.
(closes issue #12187)
(reported by, and lots of testing from atis)
(props to file for the help with ideas)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@108583 65c4cc65-6c06-0410-ace0-fbb531ad65f3
has been subscribed to goes on hold. Otherwise, they just stay on like it does
when an extension is in use.
(closes issue #11263)
Reported by: russell
Patches:
notify_hold.rev1.txt uploaded by russell (license 2)
Tested by: russell
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@108530 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The scheduler callback will always return 0. This means that this id
is never rescheduled, so it makes no sense to loop trying to delete
the id from the scheduler queue. If we fail to remove the item from the
queue once, it will fail every single time.
(Yes I realize that in this case, the macro would exit early because the
id is set to -1 in the callback, but it still makes no sense to use
that macro in favor of calling ast_sched_del once and being done with it)
This is the first of potentially several such fixes.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@108288 65c4cc65-6c06-0410-ace0-fbb531ad65f3
it is appropriate and when it is not appropriate to use it.
I also removed the part of the debug message that mentions that this is probably a bug because
there are some perfectly legitimate places where ast_sched_del may fail to delete an entry (e.g.
when the scheduler callback manually reschedules with a new id instead of returning non-zero to
tell the scheduler to reschedule with the same idea). I also raised the debug level of the debug
message in AST_SCHED_DEL since it seems like it could come up quite frequently since the macro
is probably being used in several places where it shouldn't be. Also removed the redundant line,
file, and function information since that is provided by ast_log.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@108227 65c4cc65-6c06-0410-ace0-fbb531ad65f3
on the issue with mmichelson)
- Update copyright info on app_chanspy.
- Fix a race condition that caused app_chanspy to crash. The issue was that
the chanspy datastore magic that was used to ensure that spyee channels did
not disappear out from under the code did not completely solve the problem.
It was actually possible for chanspy to acquire a channel reference out of
its datastore to a channel that was in the middle of being destroyed. That
was because datastore destruction in ast_channel_free() was done near the
end. So, this left the code in app_chanspy accessing a channel that was
partially, or completely invalid because it was in the process of being free'd
by another thread. The following sort of shows the code path where the race
occurred:
=============================================================================
Thread 1 (PBX thread for spyee chan) || Thread 2 (chanspy)
--------------------------------------||-------------------------------------
ast_channel_free() ||
- remove channel from channel list ||
- lock/unlock the channel to ensure ||
that no references retrieved from ||
the channel list exist. ||
--------------------------------------||-------------------------------------
|| channel_spy()
- destroy some channel data || - Lock chanspy datastore
|| - Retrieve reference to channel
|| - lock channel
|| - Unlock chanspy datastore
--------------------------------------||-------------------------------------
- destroy channel datastores ||
- call chanspy datastore d'tor ||
which NULL's out the ds' || - Operate on the channel ...
reference to the channel ||
||
- free the channel ||
||
|| - unlock the channel
--------------------------------------||-------------------------------------
=============================================================================
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@108135 65c4cc65-6c06-0410-ace0-fbb531ad65f3
