the existing channel name without the "Zap/" or "DAHDI/" prefix, since our
test string is also without that prefix.
(closes issue #13027)
Reported by: dferrer
Patches:
chan_zap-1.4.21.1_fix2.patch uploaded by dferrer (license 525)
(Slightly modified by me, to compensate for both names)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@137847 65c4cc65-6c06-0410-ace0-fbb531ad65f3
CDR(userfield) if it is set. The new behavior is to check for the userfield
column on module load, and if it exists, we will store CDR(userfield) when
CDRs are written. A similar patch already went into trunk and 1.6.0.
(closes issue #13290)
Reported by: falves11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@137348 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Reported by: korihor
Wow, this one was a challenge!
I regrouped and ran a new strategy for
setting the ~~MACRO~~ value; I set it once
per extension, up near the top. It is only
set if there is a switch in the extension.
So, I had to put in a chunk of code to detect
a switch in the pval tree.
I moved the code to insert the set of ~~exten~~
up to the beginning of the gen_prios routine,
instead of down in the switch code.
I learned that I have to push the detection
of the switches down into the code, so everywhere
I create a new exten in gen_prios, I make sure
to pass onto it the values of the mother_exten
first, and the exten next.
I had to add a couple fields to the exten
struct to accomplish this, in the ael_structs.h
file. The checked field makes it so we don't
repeat the switch search if it's been done.
I also updated the regressions.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@136726 65c4cc65-6c06-0410-ace0-fbb531ad65f3
release. Codec dahdi no longer functions with the transcoder interface in
zaptel at this time (which the last zaptel release was 1.4.11).
NOTE: Still needs an update to the configure script to make sure that
codec_dahdi is only built if the new transcoder interface is present in the
drivers.
(Issue: DAHDI-42)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@136544 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This allows vim :make functionality to work properly when errors have
occurred in the build. Without printing the directories, vim did not
know how to find the file that the error occurred in.
If the extra bit of build noise annoys anyone, just let me know, and
I'll make this optional.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@136168 65c4cc65-6c06-0410-ace0-fbb531ad65f3
there are places where ast_rtp_new_source may be called
where the tech_pvt of a channel may not yet have an
rtp structure allocated. This caused a crash in chan_skinny,
which was fixed earlier, but now the same crash has been
reported against chan_h323 as well. It seems that the best
solution is to modify ast_rtp_new_source to not attempt to
set the marker bit if the rtp structure passed in is NULL.
This change to ast_rtp_new_source also allows the removal
of what is now a redundant pointer check from chan_skinny.
(closes issue #13247)
Reported by: pj
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@136062 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The purpose of this branch was to take into account
"burps" which could cause jitterbuffers to misbehave.
One such example is if the L option to Dial() were used
to inject audio into a bridged conversation at regular
intervals. Since the audio here was not passed through
the jitterbuffer, it would cause a gap in the jitterbuffer's
timestamps which would cause a frames to be dropped for a
brief period.
Now ast_generic_bridge will empty and reset the jitterbuffer
each time it is called. This causes injected audio to be handled
properly.
ast_generic_bridge also will empty and reset the jitterbuffer
if it receives an AST_CONTROL_SRCUPDATE frame since the change
in audio source could negatively affect the jitterbuffer.
All of this was made possible by adding a new public API call
to the abstract_jb called ast_jb_empty_and_reset.
(closes issue #11259)
Reported by: plack
Tested by: putnopvut
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@135841 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Reported by: bcnit
Tested by: murf
I discovered that also, in the previous bug fixes and changes,
the cdr.conf 'unanswered' option is not being obeyed, so
I fixed this.
And, yes, there are two 'answer' times involved in this
scenario, and I would agree with you, that the first
answer time is the time that should appear in the CDR.
(the second 'answer' time is the time that the bridge
was begun).
I made the necessary adjustments, recording the first
answer time into the peer cdr, and then using that to
override the bridge cdr's value.
To get the 'unanswered' CDRs to appear, I purposely
output them, using the dial cmd to mark them as
DIALED (with a new flag), and outputting them if
they bear that flag, and you are in the right mode.
I also corrected one small mention of the Zap device
to equally consider the dahdi device.
I heavily tested 10-sec-wait macros in dial, and
without the macro call; I tested hangups while the
macro was running vs. letting the macro complete
and the bridge form. Looks OK. Removed all the
instrumentation and debug.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@135799 65c4cc65-6c06-0410-ace0-fbb531ad65f3
was perverted. This change reverts IAX2 to the original meaning, which was,
that the callerid set on the client should be overridden on the server, even if
that means the resulting callerid is blank. In other words, if you set
"callerid=" in the IAX config, then the callerid should be overridden to blank,
even if set on the client. Note that there's a distinction, even on realtime,
between the field not existing (NULL in databases) and the field existing, but
set to blank (override callerid to blank).
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@135747 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Reported by: greyvoip
Tested by: murf
OK, a few days of debugging, a bunch of instrumentation
in chan_sip, main/channel.c, main/pbx.c, etc. and 5 solid
notebook pages of notes later, I have made the small
tweek necc. to get the start time right on the second
CDR when:
A Calls B
B answ.
A hits Xfer button on sip phone,
A dials C and hits the OK button,
A hangs up
C answers ringing phone
B and C converse
B and/or C hangs up
But does not harm the scenario where:
A Calls B
B answ.
B hits xfer button on sip phone,
B dials C and hits the OK button,
B hangs up
C answers ringing phone
A and C converse
A and/or C hangs up
The difference in start times on the second CDR is because
of a Masquerade on the B channel when the xfer number is
sent. It ends up replacing the CDR on the B channel with
a duplicate, which ends up getting tossed out. We keep
a pointer to the first CDR, and update *that* after the
bridge closes. But, only if the CDR has changed.
I hope this change is specific enough not to muck
up any current CDR-based apps. In my defence, I
assert that the previous information was wrong,
and this change fixes it, and possibly other
similar scenarios.
I wonder if I should be doing the same thing
for the channel, as I did for the peer, but
I can't think of a scenario this might affect.
I leave it, then, as an exersize for the users,
to find the scenario where the chan's CDR
changes and loses the proper start time.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@134883 65c4cc65-6c06-0410-ace0-fbb531ad65f3
targeting areas where an unknown and potentially
long time has just elapsed. Also added a check
to try_calling() to return early if the timeout
has elapsed instead of potentially setting a negative
timeout for the call (thus making it have *no* timeout
at all).
(closes issue #13186)
Reported by: miquel_cabrespina
Patches:
13186.diff uploaded by putnopvut (license 60)
Tested by: miquel_cabrespina
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@134758 65c4cc65-6c06-0410-ace0-fbb531ad65f3
